Delta Electronics SI65 User manual

SMT Power Inductor
SI65 Type
Features
RoHS compliant.
mounting.
Low profile (4.85mm max. height) SMD type.
Unshielded.
Self-leads, suitable for high density
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Idel for power source circuits, DC-DC converter,DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
5
Electrical Characteristics:
0.00 0.01 0.10 1.00 10.00
CURRENT (A)
1.00
10.00
100.00
1000.00
INDUCTANCE (uH)
221
181
151
121
101
820
680
560
470
390
330
220
180
150
120
100
270
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
25 100KHz, 0.1V for 0.33~8.2uH. 1KHz,1.0V for 10uH~220uH.
oC,
PART NO.
L
(uH)
1
DCR
( ) MAX
Irated
(Adc)
2
SI65 - R33 0.33 0.0043 8.50
SI65 - R56 0.56 0.0095 6.60
SI65 - R78 0.78 0.0070 6.00
SI65 - R82 0.82 0.0110 6.00
SI65 - 1R0 1.00 0.0125 4.50
SI65 - 1R5 1.50 0.0160 4.00
SI65 - 2R2 2.20 0.0230 3.20
SI65 - 2R7 2.70 0.0250 2.90
SI65 - 3R3 3.30 0.0300 2.60
SI65 - 4R7 4.70 0.0340 2.30
SI65 - 6R8 6.80 0.0550 1.80
SI65 - 8R2 8.20 0.0600 1.70
SI65 - 100 10.00 0.0500 1.50
SI65 - 120 12.00 0.1200 1.40
SI65 - 150 15.00 0.1400 1.30
SI65 - 180 18.00 0.1500 1.20
SI65 - 220 22.00 0.1800 1.10
SI65 - 270 27.00 0.2000 0.97
SI65 - 330 33.00 0.2300 0.88
SI65 - 390 39.00 0.3200 0.80
SI65 - 470 47.00 0.3700 0.72
SI65 - 560 56.00 0.4200 0.68
SI65 - 680 68.00 0.4600 0.61
SI65 - 820 82.00 0.6000
SI65 - 101 100.00 0.7000 0.52
SI65 - 121 120.00 0.9300 0.48
SI65 - 151 150.00 1.1000 0.40
SI65 - 181 180.00 1.3800 0.38
SI65 - 221 220.00 1.5700 0.35
0.58
1. Tolerance of inductance : 15% for 0.33~8.2uH, 10% for 10~220uH.
2. Irated is the DC current which cause the inductance drop less than 10% of its nominal inductance without current
o
and the surface temperature of the part increase less than 45 C.
oo
3. Operating temperature: -20 C to 105 C (including self-temperature rise).
Mechanical Dimension:
5.8
6.1
1.1
UNIT:mm/inch
A =5.8 0.2 / 0.228 0.008
B = 5.2 0.2 / 0.205 0.008
C = 4.5 0.35 / 0.177 0.014
D = 1.2 0.2 / 0.047 0.008
¡Ó
¡Ó
¡Ó
¡Ó
¡Ó
¡Ó
¡Ó
¡Ó
B
C
D
A
RECOMMENDED PAD PATTERNS