Delta Electronics Planar Transformer & Inductor E/E 18 User manual

76
Planar Transformer & Inductor
Electrical Characteristics:
Features
Mechanical Dimension:
Unit: mm
This low profile planar inductor is developed for a high power density DC-DC converter.
TURN DIELECTRIC
INDUCTANCE OPERATING AMBIENT CURRENT
PART NO. RATIO STRENGTH WEIGHT
FREQUENCY TEMPERATURE UP TO
L(1-2) L(4-3) (1-2) TO (4-3) PRI TO SEC WDGS TO CORE
PLI1810-001 1.44uH 25% 12.96uH 25% 400KHz 3 : 9 1500Vdc 500Vdc - 10 C to +55 C 7.4gr 35 A
INDUCTOR
22.0 Max.
15.0 0.5
22.0 Max.
9.0 Max.
.
1.5 Ref.
2.54 0.5
0.127~0.254
1 2
4
3
Schematic :
PRI
3
4
2
1
SEC
Features
Mechanical Dimension:
Unit: mm
This planar inductor is suitable for forward converter's output inductor and it has a winding
for auxiliary feed to input side.
Electrical Characteristics:
TURN DIELECTRIC
INDUCTANCE OPERATING DUTY AMBIENT
PART NO. RATIO STRENGTH WEIGHT
FREQUENCY CYCLE TEMPERATURE
L(1-2) L(4-3) (1-2) TO (4-3) PRI TO SEC WDGS TO CORE
PLI1810-002 172.8uH 25% 10.8 uH 25% 400KHz 8 : 2 0.5 Max. 1500Vdc 500Vdc -10 C to +55 C 7.8gr
TRANSFORMER
15.0 0.5
22.0 Max.
14.0 0.5
9.0 Max.
19.0 Max. 0.127~0.254
1
2
34
Schematic :
PRI
4
3
2
1
SEC
E/E 18
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
Power Capacity 50 to 100W
Unit : mm
Core size (LxHxW) : 22x9x22 Frequency Range : 100K~500KHz