Delta 36-6020 User manual

Français (34)
Español (65)

Riving knife alignment ...................................................30
Using the Rear Out-Feed support
Lowering the riving knife
Using the Table Extension
32
32
32
8

36-6020

Install height adjustment knob as shown
on pg. 15 Fig. 1 and raise motor/arbor
assembly to the upper most position to
provide easy access to riving knife lock
knob and arbor assembly.

Fig. 1
KK
JJ
Insert wheel handle shoulder screw (JJ) in to height
adjustment wheel knob (KK) as shown in Fig. 1
1.
Tighten shoulder screw with Philips Screw driver into the
Hand Wheel.
freely around shoulder screw when
the blade with the Height Adjustment
2.
Height Adjustment Knob Installation
Height adjustment wheel knob should rotate
raising or lowering
Hand Wheel.

20