Delton X6 User manual

Name Phone No.
Address
Model
Date of purchase
Warranty period
Warranty record:
Quality Certificate
Date of production
Inspector
Robot vacuum cleaner
User Manual
*This product is subject to the real product, and our company reserves the right to update the product.
If there is any change, it will not be notified.
1. Please keep your product warranty card properly.
2. When you need to maintain the product, please fill in the warranty information completely, make sure the font is
neat and easy to identify.
3. When you need the after-sales service, please show the product warranty card and related purchase information.
4. The product shall be provided with relevant after-sales services in accordance with the national guarantees
regulations.
1. The maintenance of the product shall be free of charge within one year from the date of purchase. The
rechargeable battery is guaranteed for half a year. In case of product quality problems during the warranty
period, please go to the designated maintenance site with the warranty card and purchase bill for free warranty
service.
2. The following cases are not covered by the free warranty, but maintenance services are provided, and the
corresponding accessories and labor costs are charged:
a Damage caused by consumers due to improper use, maintenance and storage;
b The machine has exceeded the free warranty period;
c Damage caused by dismantling by yourself or by the maintenance department not specially appointed
by our company;
d No product warranty card or valid proof of purchase, and no user information file can be verified;
e Damage caused by force majeure such as natural disasters;
Notes:

.......................................................................
1
..................................... ................................ ....
.............................................
......................
.................................................................
..................................... ................................ ....
..........................................................................
................................. ........................................ ....
.................................
.................................. ....
........................
................................
... ....
................................ ... ....
..............
.....................................................................
.................................... ......
5
10
11
13
14
16
20
21
24
25
26
27
28
29
Contents
Safety precaution
Product structure
How to use the charging dock
How to use/remove the water tank and mop
Start/stop cleaning
APP user guide
Product cleaning and maintenance
Specifications
Maintenance
Troubleshooting
Corrective action before reporting a failure
Hazardous substances contained in this product
Voice prompt/indicator description
Battery recycling
Warranty Card/Quality Certificate
Thank you for choosing our robot vacuum cleaner!
Please read this manual carefully before use and
keep it for future reference. Hopefully we shall render
you a more convenient life of smart home.
This product is subject to the material object. Our
company reserves the right to update the product
without prior notice.
Best wishes!

-1- -2-
-1- -2-
-1- -2-
Safety precaution Safety precaution
-1- -2-
·Do not use this product on wet or watery ground.
·Do not over-bend wires or place heavy or sharp objects on the machine.
·Don’t touch the cord and power adapter with a wet hand.
·To clean this product and the charging dock, the power plug should be unplugged.
·Remove any items from the floor that may jam the product, such as fragile items, corduroy
clothing, paper, packaging materials of any type, curtains, loose cables, etc., and lift
curtains and carpets off the floor to avoid accidents .
·Please turn off the power switch when carrying this product or left unused for a long time.
·Don’t put this product around burning objects, including cigarette, lighter or anything that is
likely to cause fire. Don’t use it with inflammable around, such as ether, alcohol, chemicals,
liquefied natural gas, flammable sprays, insecticides, air fresheners, cosmetics, etc.
·Don’t wipe or spray this product with beverages, flammable and volatile substances or
surfactants (detergents, bath products, etc.).
·For indoor use only.
·Do NOT place any objects on top of this product.
·When this product is working, please ensure that everyone in the room knows that this
product is working, and be careful not to drop or be injured by this product.
·Please keep infants and pets away when this product is working.
·Do not store or use this product in places (tables, furniture, railings, stairs, chairs, etc.) where
it may fall onto the floor.
·Do not use this product on a sloping surface.
·Be careful not to let your hands, feet, hair or clothes get stuck in the brushes or wheels when
using or cleaning this product.
·The operating and storage temperature of the product ranges from 5°C to 38°C.
·Do not use this product in a high temperature environment or in hot sunlight for a long time.
·Before using this product, please make sure that the dust collector is empty.
·Do not use this product in a space where people or pets sleep or lie down.
·If the product emits smoke when charging, please unplug the power plug immediately and
contact our customer service.
·Do not push the charging terminals with your hands; never use charged objects to contact
the charging terminals, it may cause injury.
·For initial use, to ensure safe operation, please keep observing this product while it is
working.
·For safety reasons, please do not allow children under the age of 8 to use this product.
·This product is not intended for use by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the product by a person responsible for their safety
Please carefully read and understand the following cautions, so as to use this product safely
and properly to prevent accidental risks or damages. This product is a household cleaning
product, and it is forbidden to be used in commercial, experimental and industrial places.
Caution
Caution

-3- -4-
-3- -4-
-3- -4-
-3- -4-
Safety precaution Safety precaution
-1- -2-
-1- -2-
-1- -2-
-7- -8-
Notes:
Please organize the cleaning area according to the following guidelines before
using the main machine.
The power cord and other sundries scattered on the
ground may entangle or wrap the product. Be sure to
remove them before use.
The gap of less than 10 cm at the bottom of the household
furniture may stick the product. If cleaning is needed,
please raise the furniture.
Guardrails shall be placed at the edge of the double layer to
ensure the safe operation of the product.
Please roll up the fringe of the carpet or make the product
work on the short-wool carpet.
·Before using the product, please wipe off the liquid (water, oil, etc.) and pet
excrement on the floor to prevent secondary pollution.
·Before using the product, be sure to check if a filter is installed on the product.
·You can wash dust collector and water tank with water, and make sure you dry it
well after each cleaning.
·Only the battery and power adapter provided by the factory can be used with this
product. This product can only be dismantled and repaired by authorized techni-
cian. Please dispose of this product properly to meet the requirements of environ-
mental protection.
·Before use, be sure to remove packaging materials, bubble bags, styrofoam, etc.
·Please properly dispose of the relevant packaging materials (bubble bags,
styrofoam, etc.), and do not let children play with.
Notes
We are not responsible for any damage or injury if users do
not read the cautions and use them improperly. Please be
sure to read the relevant cautions carefully before use.

-7- -8-
-7- -8-
-7- -8-
-7- -8-
-5- -6-
Product structure
Product structure
-3- -4-
-3- -4-
Main machine
Charging dock X 1
Cleaning brush X 1
Water tank X 1 User manual Mop X 2
Dust collector cover
Dust collector button
System reset button
HEPA Dust collector X 1
Power adapter X 1
Side brushes X 4
（X 2 Left，X 2 Right）
Top view
Lateral view
Power on/Power off/Start stop button
• Press and hold the button for more than 3
seconds to turn on/off the robot vacuum
cleaner.
• Short press the button to start cleaning,
pause operations.
LED indicator
• Green light: normal operation/standby/
charging completed.
• Red light: Low battery/fault alarm/charging.
Automatic recharge/APP network connection
• Short press button to start/stop automatic charging.
• Connect to Wi-Fi network: press and hold the button
for more than 3 seconds, the robot will make a "ding
dong" sound, and the voice prompts "Enable network
connection", the green light of the power button will flash
quickly, then the machine is connecting to the network.
• APP hotspot connection: press and hold the button
for more than 6 seconds, the robot will make "ding dong"
sound twice. The voice prompts "Enable APP hotspot
connection", the green light of the power button will flash
quickly, then the APP is connecting with hotspot.

-9- -10-
-9- -10-
-9- -10-
-9- -10-
-7- -8-
Product structure
Product structure
-7- -8-
-7- -8-
-5- -6-
-5- -6-
Main machine Diagram of dust collector
Diagram of main brush
Laser range sensor
Laser obstacle sensor
Fine filter cottonDust collector
Opening of the main
brush cover
Main brush cover
Axle sleeve
Main brush
Pre-filter HEPA
Charging terminal
Cliff sensor
(Cliff detection at 9 cm)
Driving caster
Universal caster
Cliff sensor
(Cliff detection at 9 cm)
Side brush
Battery cover
Driving caster
Main brush
Main brush cover

-11- -12-
-11- -12-
-11- -12-
-11- -12-
-9- -10-
-9- -10-
Product structure How to use the charging dock
-9- -10-
-7- -8-
-7- -8-
Diagram of water tank
Charging dock
Mop
Hook and loop fastener
Water outlet
Rubber stopper
Water inlet
Water tank button
Power indicator
Signal output sensor
Charging terminal
1. The indicator light will turn off
when it is working.
2. The indicator light stands on
indicates standby mode of the
charging dock.
Notes
·When charging the robot vacuum cleaner, if the water tank is in the main machine,
please replace the dust collector before proceeding.
·When charging, if you apply pressure to the charging terminal by hand or a charged
object, it may cause personal injury.
·Do not install the charging dock in a damp place or in a place where the sun shines
directly.
Place the charging dock on a flat surface,
close to the wall, press the power button
on the main machine until the indicator
lights up, and then connect the charging
adapter to the socket.
•There must be a space around the
charging dock (2m in front and 1m on the
left and right sides).
•When placing the charging dock, please
place the back of the charging dock
against the wall in a shaded place.
•Be sure to use the supplied dedicated
charging adapter.
Press the power button on the main machine
until the indicator lights up, and then connect the
charging terminal of the charging dock to charge.
• When the battery is low and the power cannot
be turned off, the battery must have at least 20%
remaining power to run normally.
• If the position of the charging dock changes, the
robot may not be able to find the previously
saved route.
Space 3CM

-13- -14-
-13- -14-
-13- -14-
-13- -14-
-11- -12-
-11- -12-
-11- -12-
How to use/remove the water tank and mop How to use/remove the water tank and mop
-9- -10-
-9- -10-
-17- -18-
NotesNotes
·The excess water of mop may affect the operation of robot vacuum cleaner, please
squeeze and dry it before use.
·The mop may have the problem of color shift due to the nature of the fabric. Please keep
it clean and dry after use.
• If the water stays in the water tank for a long time, it may be polluted and give off
peculiar smell.
• After cleaning the water tank, empty the remaining water, and then open the rubber
plug to dry.
Water tank Open the water inlet of the water tank,
fill it with water, and then cover the
rubber plug.
When installing the water tank, put it into the product body and slide horizontally until it clicks.
After cleaning, press the button in the center of the water tank to separate it from the body, and then
pour out the remaining water. After that, remove the mop and clean the mop and dust collector.
Fix the mop with hook and loop fastener
on the bottom of the water tank.
• If the rubber plug is not properly
plugged, it may leak water. In addition,
it is recommended to wet the mop with
water, and then squeeze it hard before
use.

-17- -18-
-17- -18-
-17- -18-
-17- -18-
-15- -16-
-13- -14-
Start/stop cleaning APP user guide
room1
room3
room4
room5
room2
room3
room4
room5
room2
room1
-13- -14-
-11- -12-
-11- -12-
-11- -12-
Notes
• By installing the “Tuya Smart” APP, you can use your smartphone to perform
various functions.
• For detailed instructions on how to use the APP, please refer to the attached APP
User Guide.
Smart clean
Zone clean
Room clean
After starting up, the robot vacuum cleaner will pause
for mapping and positioning, then start to create maps
along the corner scanning environment, and then plan
the cleaning path in an “S” shape. The robot will
automatically create a cleaning area, clean efficiently
in sequence, and automatically return to the charging
dock to charge after cleaning.
First, set the cleaning zone in the APP, and the
scanned map will be displayed in the APP. You only
need to touch the zone to be cleaned, and then click
“Save”, and the robot will automatically move to the
designated area for cleaning.
Click on “Room clean” in the APP, click “add area”, a
virtual box appears on the map, move the box to the
designated cleaning area, and then click “Start” to start
the robot moving to the designated area for cleaning.
Preparation
Automatic charging/APP network connection
Power on/Start cleaning
Stop cleaning/Power off
Manual charging Short press the automatic
recharge button to start automatic
charging/stop charging
When the cleaning is completed or
the remaining battery power is
lower than 20%, the robot will
automatically move to the charging
dock and start charging
automatically.
The robot will automatically
resume previous unfinished task
when the its charging power
reaches 80% or higher.
Long press this button to start the
APP network connection; Please
refer to page 6 for details (Product
structure)
Automatic charging
Stop cleaning During the cleaning process,
short press the power button
to pause cleaning.
Press and hold the power
button for more than 3
seconds to turn off the power.
·The power cannot be turned off while charging.
Please turn off the power after disconnecting from
the charging dock.
Turn off the power
Break point resume
APP network connection
The side brushes are installed on both sides of the
bottom of the main machine.
Power on Press and hold the power button for more
than 3 seconds to turn on the power.
Start cleaning After turning on the machine, short press
the power button to start cleaning.

-19- -20-
-19- -20-
-19- -20-
-19- -20-
-17- -18-
-17- -18-
-17- -18-
-15- -16-
-15- -16-
APP user guide Product cleaning and maintenance
-13- -14-
-13- -14-
-13- -14-
Notes Notes
• By installing the “Tuya Smart” APP, you can use your smartphone to perform various
functions.
• For detailed instructions on how to use smart APP, please refer to the attached APP
User Guide.
• Before cleaning the product, be sure to turn off the power supply to prevent
malfunction and electric shock.
• If the dust collector is full of dust or the filter is mixed with impurities, the suction
may be weakened.
• Please clean with water and completely remove the moisture before using the
dust collector.
Smart clean/Area clean
With this APP, you can set the range and location of the
area to be cleaned as well as one or more areas, and it
will clean according to the set areas.
Scheduled clean
If you use the APP to schedule the cleaning time, the
cleaning will automatically start at the specified time.
After cleaning, the robot vacuum cleaner goes to the
charging dock to start charging.
Suction setting
You can use this APP to control water quantity and
suction. Each can be adjusted in three options.
Do Not Disturb mode
When you activate “Do Not Disturb” mode, the robot
vacuum cleaner will not automatically clean or play voice
guidance. You can use this APP to turn “Do Not Disturb”
mode on or off.
Y-MOPPING
Open the APP, click
on “Settings” and
turn on “Y-MOPPING”
switch, the robot will
start mopping the
floor in Y-shape
pattern.
Set no-go zone/virtual wall
You can use the APP to set the no-go zone, and you
can set one or many no-go zones. The robot vacuum
cleaner will not clean the set no-go area and only clean
other areas.
Area clean
Scheduled clean
Water control Suction power control
Do Not Disturb
Set no-go zone
Press the button in the center of the
dust collector to separate it from the
main machine.
Open the dust collector and take out
the filter screen, filter sponge and
pre-filter.
After emptying the dust collector,
please rinse it with water.
• All kinds of dust collector can be
cleaned with water. Please use it
after it is completely dried.
dust collector