Denon AVR-X7200W Technical manual

//
1
AVR-X7200W(A)DTS:X UPDATE
Please note that we are very happy to announce that the free of charge DTS:X update for the AVR-X7200W and AVR-X7200WA is available for download.
This update introduces some changes to your system that we want you to be aware before you update the unit since it may affect daily usage.
The following features are added:
•DTS:X decoding
•DTS Neural:X upmixing to enjoy non DTS:X content (in PCM or DTS format) using the full DTS:X speaker configuration
With added DTS:X decoding and DTS Neual: X upmixing capability, following changes will happen to your receivers:
•DTS Neo:X will be replaced by DTS Neural:X
•Dolby Surround mode usage will be limited to PCM and Dolby content
You can also take a look in the modified user manuals for the products:
Web manual for AVR-X7200W with DTS:X
Web manual for AVR-X7200WA with DTS:X

//
2
AVR-X7200W(A)DTS:X UPDATE
To update your unit, follow the below steps:
1. Press the SETUP button on the Remote Control
2. Select General > Firmware > Update
3. Select Update Now
*Note on Auro-3D upgraded units:
If you have an Auro-3D upgraded unit, DTS:X firmware update won’t effect this. However we will add more flexibility to the speaker setup and after the update
you will be able to use the following speaker configuration to enjoy all 3D sound formats (Dolby Atmos, DTS:X and Auro-3D) by one speaker layout with 4 height
speakers:
Front (FL/FR)
Center (C)
Surround (SL/SR)
Front Height (FHL/FHR)
Rear Height (RHL/RHR)
Subwoofer (SW)