Denver Electronics MRP-132 User manual

STEREO 3CD MINI HI-FI-SYSTEM MED PLL RADIO, KASSETT OCH SKIVSPELARE
MINI STEREO HI-FI SYSTEM MED 3-CD AFSPILLER, PLL RADIO, KASSETTEOPTAGER OG PLADESPILLER
STEREO 3-CD MINI HI-FI LAITE RADIOLLA, KASETTI- JA LEVYSOITTIMELLA
STEREO 3CD MINI HI-FI SYSTEM WITH PLL RADIO CASSETTE AND TURNTABLE
DENVER MRP-132
INSTRUKTIONSMANUAL
BETJENINGSVEJLEDNING
KÄYTTÖOHJE
INSTRUCTION MANUAL
ALL RIGHTS RESERVEDCOPY RIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com

LOCATION OF CONTROLS
1) LCD DISPLAY 14) DISC 1,2,3 SELECTOR
2)REMOTESENSOR 15)CDDOOR
3) STANDBY LED INDICATOR 16) PRE-SET EQ BUTTON
4)POWERBUTTON 17)CDSTOPBUTTON
5)MUTEBUTTON 18) CD PLAY / PAUSE BUTTON
6) FM MODE / DUBBING SPEED SELECTOR 19) VOLUM UP-DOWN BUTTON
7) MEMEORY / CLOCK ADJUST BUTTON 20) SKIP / SEARCH / TUNING UP BUTTON
8) SLEEP / TIMER BUTTON 21) SKIP / SEARCH / TUNING DOWN BUTTON
9) DISC CHANGE BUTTON 22) EXTRA BASS CONTROL BUTTON
10) RANDOM / M-DN BUTTON 23) FUNCTION KNOBS
11) HEADPHONE JACK 24) DECK 2 CONTROL KEYS
12) REPEAT / M-UP BUTTON 25) CD DOOR OPEN/CLOSE BUTTON
13) DECK 1 CONTROL KEY 26) SPINDLE ADAPTOR
RECORD KEY 27) 33/45 RPM SPEED SELECTOR
PLAYBACK KEY 28) PICK-UP HOLDER
REWIND KEY 29) FM MODE / BEAT CUT 1-2 SELECTOR
FAST FORWARD KEY 30) SPEAKER WIRE TERMINAL
STO/EJECT KEY 31) AUTO STOP SWITCH
PAUSE KEY 32) FM WIRE ANTENNA
33)ACPOWERCORD
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
IMPORTANT:
SINCE MOVEMENT OF THE CD MECHANISM AND THE SENSITIVE CIRCUITY MAY CAUSE INTERFERENCE TO
THE RADIO TUNER NEARBY, SWITCH THIS UNIT OFF WHILE OPERATING OTHER RADIO DEVICES.
EN-1

PRECAUTIONS FOR USE
INSTALLATION
zUNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
zDO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE ALL
OTHER CONNECTIONS HAVE BEEN MADE.
zDO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT THE POWER CORD TO AC OUTLET AND SWITCH ON THE MAIN POWER SWITCH AT THE BACK
OF UNIT.
2. WHEN YOU FIRST PLUG THE UNIT INTO THE MAINS, THE UNIT WILL GO INTO STANDBY MODE.
3. CONNECT THE SPEAKER WIRE TO THE SPEAKER TERMINAL LOCATED ON THE REAR SIDE OF THE
UNIT.
4. TURN ON THE POWER AND SELECT “ CD “ FUNCTION. IF THE LCD DISPLAY IS ON WITH BACKLIGHTING,
IT’S MEAN THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC.
SETTING THE CLOCK
1. SET UNIT IN STANDBY MODE.
2. PRESS THE “MEM/CLK-ADJ” BUTTON, THE FIRST SECOND DIGIT OF “00” IS FLASHING. PRESS OR
BUTTON TO SET THE CORRECT HOUR. PRESS ”MEM/CLK-ADJ” BUTTON TO STORE THE CORRECT
HOUR.
3. THE THIRD & FOURTH DIGIT OF “00” IS FLASHING, PRESS THE OR BUTTON TO SET THE
CORRECT MINUTES. PRESS “MEM/CLK-ADJ” TO STORE THE CORRECT MINUTE.
4. TO SELECT 12/24 HOURS DISPLAY MODE, HOLD THE CD “ STOP ” BUTTON AND THEN PRESS THE
“ MEM/CLK-ADJ ” BUTTON TO CHANGE MODE REPEATEDLY.
¾THE PRE-SET TIME WILL BE RE-SET COMPLETELY IF SWITCHING OFF THE MAIN POWER
BUTTON ON SYSTEM. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY
MODE FOR CONVENIENCE USAGE.
LISTENING TO RADIO
MANUAL TUNING
1. PRESS “TUNER/BAND” BUTTON AND SELECT THE DESIRED BAND (AM OR FM).
2. TUNE TO THE REQUIRED STATION BY PRESSING THE TUNING “+” OR “-” BUTTON.
3. ADJUST VOLUME CONTROLS TO THE DESIRED VOLUME LEVEL.
AUTO TUNING
1. PRESS ”TUNER/BAND” BUTTON AND SELECT THE DESIRED BAND (AM OR FM).
2. PRESS AND HOLD THE TUNING “+” OR “-” BUTTON FOR 1-2 SECONDS AND THEN RELEASE
3. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTIL A RADIO STATION IS REACHED.
4. REPEAT STEP 3 & 4 UNTIL THE DESIRED RADIO STATION IS BEING REACHED.
5. ADJUST VOLUME CONTROLS TO THE DESIRED VOLUME LEVEL.
PRESET STATIONS
YOU CAN STORE UP TO TOTAL OF 20 RADIO STATIONS IN THE MEMORY.
1. SET TO RADIO MODE
2. TURN TO THE DESIRED RADIO STATION BY “ MANUAL” OR “AUTO” TUNING METHOD.
3. PRESS “MEM/CLK-ADJ” BUTTON TO ENABLE PROGRAM STATE.
4. PRESS “REPEAT/M-UP” BUTTON TO SELECT THE DESIRED STATION MEMORY FOR STORAGE.
5. PRESS “MEM/CLK-ADJ” BUTTON AGAIN TO CONFIRM THE SETTING.
6. REPEAT STEP 2 TO 5 TO STORE OTHER STATIONS.
7. PRESS “M-UP” OR “M-DN” BUTTON TO SELECT THE PRESET STATIONS IN ORDER.
8. TO RETURN NORMAL TUNER MODE, LEAVE KEYS FREE.
¾THE PRE-SET MEMORIES WILL BE CANCELLED COMPLETELY IF SWITCHING OFF THE MAIN POWER
BUTTON ON SYSTEM. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
¾THERE ARE 5 SECONDS FOR PROGRAM STATE, AFTER 5 SEC. THIS STATE WOULD RELEASE TO
NORMAL TUNER MODE AUTOMATICALLY.
¾YOU CAN OVERWRITE A PRESENT STATION BY STORING ANOTHER FREQUENCY IN ITS PLACE.
EN-2

RADIO DATA SYSTEM (RDS)
THIS IS THE FEATURES TO DISPLAY THE INFROMATION WHICH RELEASED FROM THE RADIO BROADCASE:-
RDS MODE : PRESS TO ACTIVE THE RDS FUNCTION AND THE PROGRAM SERVICE STATION NAME (PS) IS
BEING DISPLAYED.
RDS SEARCH : PRESS TO SELECT THE PROGRAM TYPE YOU WANT TO LISTEN, THEN PRESS THE TUNING
+/- BUTTON TO START RDS SEARCHING AND THE UNIT CAN AUTOMATICALLY DETECT A SUITABLE STATION,
WHICH IS CURRENTLY BROADCASTING WITH PROGRAM TYPE IDENTIFICATION (PTY) SIGNAL.
REMARK : NO “ PS “ NOR “ PTY “ APPEARS IF NO SIGNAL IS SENT.
PROGRAMMES ARE CLASSIFIED AS FOLLOWS:
NEWS, AFFAIRS (current affairs), INFO (information), SPORT EDUCATE (education), DRAMA, CULTURE, SCIENCE,
VARIED, POP M (pop music), ROCK M (rock music), MOR M (middle of the road music), LIGHT M (light classical),
CLASSICS (serious classical), OTHER M (other music).
NOTES
PROGRAMME SERVICE STATION NAME (PS)
THIS IS A NAME CONSISTING OF LESS THAN 8 ALPHANUMERIC CHARACTERS, WHICH IS DISPLAYED IN
ORDER TO INFORM LISTENERS ABOUT THE PROGRAMME SERVICE BEING BROADCASTBY THE RADIO
STATION. EXAMPLE: BBC 1
PROGRAMME TYPE IDENTIFICATION (PTY)
PTY ALLOWS SELECTION BY ONE OF 15 PROGRAMME TYPES RATHER THAN BY A STATION.
RADIO TEXT (TEXT)
INFORMATION SUCH AS THE CAST LIST OF A PLAY OR THE TITLE OF A SONG IS SHOWN ON THE DISPLAY.
CLOCK-TIMER (CT)
CT FUNCTION PROVIDES AN ACCURATE CLOCK SIGNAL.
IF THE CLOCK OF THE SYSTEM IS NOT ADJUSTED AFTER PLUG IN, WHEN A RDS CLOCK IS RECEIVED, THE
SYSTEM WILL AUTOMATICALLY UPDATE THE SYSTEM CLOCK TO THE RECEIVED RDS CLOCK TIME. THE
SYSTEM CLOCK IS NOW ADJUSTED.
FM & FM-STEREO RECEPTION
zSET THE FM MODE SELECTOR AT “MONO” POSITION. PROGRAMS ARE RECEIVED IN MONO MODE. IN
PARTICULAR WHEN STEREO SIGNALS ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN
MONO.
zSET THE FM MODE SELECTOR AT “ST” POSITION FOR RECEIVING STEREO PROGRAMS. THE “ST”
INDICATOR WILL APPEAR ON LCD TO SHOW FM STEREO PROGRAM IS RECEIVING.
HINTS FOR BEST RECEPTION:-
- AM/LW : THE RECEIVER HAS A BUILT-IN MW/LW BAR ANTENNA. IF AM/LW RECECPTION IS EARK, SLIGHT
ROTATION OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM/LW RECEPTION.
- FM : THE RECEIVER HAS A BUILD-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE
SHOULD BE TOTALLY UNRAVELED AND EXTENDED FRO BEST RECEPTION.
PHONO
NOTED:
-REMOVE THE STYLUS PROTECTOR.
-BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM
REST BEFORE OPERATING, AND RE-SECURED AGAIN AFTERWARDS.
1. PRESS THE “ PHONO ” FUNCTION SWITCH.
2. SET THE SPEED SELECTOR TO THE PROPER POSITION DEPENDING ON THE
RECORD TO BE PLAYED.
3. PLACE THE RECORD ON THE PLATTER (USE THE SPINDLE ADAPTOR IF REQUIRED).
4. LIFT THE TONE ARM FROM THE REST AND SLOWLY MOVE IT TO THE RECORD SIDE.
THE PLATTER WILL BEING TO ROTATE.
5. PLACE THE TONE ARM TO THE DESIRED POSITION OF THE RECORD.
6. ADJUST THE VOLUME TO THE DESIRED LEVEL.
7. AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING. LIFT THE TONE ARM
FROM THE RECORD AND RETURN IT TO THE REST.
8. TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE REST.
EN-3

REMARK : AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL
STOP BEFORE THE LAST RACK FINISH. IN THIS CASE, SELECT THE AUTO-STOP SWITCH TO “ OFF
“ POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN
OFF THE UNIT BY POWER BUTTON OR SWITCH BACK THE AUTO-STOP SWITCH TO “ ON “ POSITION TO STOP
THE PLATTER ROTATE). THEN PUT BACK THE TONE ARM TO THE REST POSITION.
PLAYING COMPACT DISC
zGETTING START
1. PRESS “CD” BUTTON.
2. PRESS “OPEN/CLOSE” BUTTON TO OPEN THE CD DOOR.
3. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY.
4. PRESS THE “ “ OR “ DISC-CH ” BUTTON TO TURNING THE CD TRAY, AND LOADING OUT THE OTHER
DISC COMPARMENT.
5. PRESS THE “OPEN/CLOSE” BUTTON TO CLOSE THE CD DOOR.
6. CD SEARCH IS PERFORMING, THE DISPLY WILL SHOW THE TOTAL NUMBER OF DISC, NUMBER OF
TRACKS & PLAYING TIME OF DISC.
NOTED : CD SEARCHING WILL BE PERFORMAED EVERYTIME WHEN SWITCHING TO CD MODE OR CLOSING
THE CD DOOR. ALL CD FUNCTIONS WILL BE RESPONSED ONLY AFTER THE CD SEARCHING IS COMPLETED.
zPLAY / PAUSE MODE
1. PRESS THE “PLAY/PAUSE” BUTTON TO START PLAYBACK, THE FIRST TRACK OF THE FIRST DISC WILL
BE PLAYED AND THE PLAY INDICATOR WILL APPEAR ON THE LCD DISPLAY.
2. OR PRESS EITHER THE “ DISC 1 ” , “ DISC 2 ” , “ DISC 3 ” BUTTON, UNIT WILL PLAY THE DISC INSIDE THE
DESIRE TRAY DIRECTLY.
3. TO INTERRUPT, PRESS THE “PLAY/PAUSE” BUTTON ONCE, AND THE DISPLAY WILL START FLASHING.
PRESS AGAIN TO RELEASE & RESUME PLAYBACK.
zSTOP MODE
1. IF “STOP” BUTTON IS PRESSED DURING PLAY OR PAUSE MODE, SYSTEM WILL GO TO STOP MODE.
zSKIP MODE (SKIP UP /SKIP DOWN )
1. DURING PLAY OR PAUSE MODE, IF “ SKIP + ” BUTTON IS PRESSED IT WILL GO TO NEXT TRACK AND
DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
2. DURING PLAY OR PAUSE MODE, IF “ SKIP - ” BUTTON IS PRESSED. IT WILL GO BACK TO THE BEGINNING
OF THE TRACK, ORIGIANL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE.
3. AFTER STEP 2, PRESS “ SKIP - ” BUTTON AGAIN WILL GO TO THE PREVIOUS TRACK AND REMAIN THE
PLAY OR PAUSE MODE.
zSEARCH MODE (SEARCH UP /SEARCH DOWN )
1. DURING PLAY MODE, IF “ SEARCH + ” BUTTON IS PRESSED & HOLD FOR FEW SECONDS, IT WILL START
SEARCHING FORWARD.
2. DURING PLAY MODE, IF “ SEARCH - ” BUTTON IS PRESSED & HOLD FOR FEW SECONDS. IT WILL STAR
SEARCHING BACKWARDS.
zREPEAT PLAY
THIS FUNCTION ALLOW TO REPEAT 1 SINGLE TRACK, 1 SINGLE DISC OR ALL DISCS:-
PRESS THE “ REPEAT “ KEYS REPEATEDLY TO SWITCH THE FUNCTION:-
REP. ALL DISC REP. 1 DISC REP. 1 TRACK
NOTE : SINGLE TRACK REPEAT FUNCTION IS POSSIBLE IN NORMAL OR PROGRAMMED PLAYBACK, REPEAT
ONE DISC OR ALL DISCS IS ONLY AVAILABLE IN NORMAL PLAYBACK.
zRANDOM PLAY
YOU CAN LISTEN ALL THE TACKS OF ALL AVAIALBLE DISCS IN A RANDOM ORDER BY THIS FUNCTION
1. PRESS “RANDOM” BUTTON ONCE, UNIT WILL PLAY ALL DISC RANDOMLY ; PRESS AGAIN, UNIT WILL
PLAY 1 DISC RANDOMLY.
2. PRESS “PLAY/PAUSE” BUTTON TO START RANDOM PLAYBACK.
3. ALL TRACKS OF ALL DISCS OR ALL TRACKS OF 1 DISC WILL BE STARTED PLAYBACK IN RANDOM
ORDER.
4. PRESS “RANDOM” BUTTON AGAIN TO CANCEL RANDOM MODE.
EN-4

zINTRO PLAY (BY REMOTE)
YOU CAN LISTEN THE BEGINNING (10 SECONDS) OF EACH TRACK IN A CD BY THIS FUNCTION & SAVING
YOUR TIME TO SEARCH THE DESIRE SONG
1. PRESS “INTRO” BUTTON AFTER PLACING A CD INSIDE THE UNIT AT CD MODE
2. SYSTEM START PLAYING THE FIRST 10 SECONDS OF EACH TRACK OF THE ENTIRE CD CONTINUOUSLY.
3. PRESS “INTRO” BUTTON ONCE AGAIN WHEN IT REACH YOUR DESIRED TRACK FOR NORMAL
PALYBACK.
CD PROGRAMMING
UP TO 60 TACKS CAN BE PROGRAMMED TO BE PROGRAMMED TO BE PLAYED IN ANY REQUIRED ORDER
FROM ONE CD OR ALL CDs IN THE CD CHANGER.
1. SET IN CD MODE.
2. PRESS THE MEM/CLK-ADJ. BUTTON
3. PRESS THE “ ” TO SELECT THE DESIRED DISC.
4. PRESS SKIP OR BUTTON TO SELECT THE DESIRED TRACK.
5. PRESS THE “ MEM/CLK/ADJ. “ BUTTON AGAIN TO STORE THE TRACK IN MEMORY.
6. REPEAT STEPS 2 TO 4 TO ENTER ADDITIONAL PROGRAM
7. PRESS PLAY/PAUSE BUTTON TO START PLAYBACK IN ORDER.
8. PRESS “STOP/BAND” BUTTON TO STOP PLAYBACK AND PRESS AGAIN TO CLEAR ALL PROGRAMMED
TRACKS.
LISTING TO TAPE
GENERAL OPERATION
STOP / EJECT KEY PRESS TO STOP ALL DECK OPERATION. PRESS AGAIN TO OPEN THE CASSETTE
DOOR.
FAST FORWARD KEY & PRESS TO START RAPID TAPE WINDING IN EITHER FORWARD OR REVERS
FAST REWIND KEY DIRECTION. PRESS STOP / FAST REWIND KEY EJECT KEYS WHEN THE
CASSETTE SPOOLS STOP TURNING.
PLAY KEY PRESS TO START PLAYING TAPE.
PAUSE KEY PRESS TO STOP TAPE OPERATION TEMPORARILY. PRESS AGAIN TO RESUME
PLAY.
RECORD KEY PRESS TOGETHER WITH PLAY KEY TO START TAPE RECORDING.
(DECK 1 ONLY)
PLAYBACK
zPRESS “TAPE” BUTTON TO ACTIVE TAPE FUNCTION
zPUT IN THE CASSETTE TAPE.
zPRESS PLAY KEY TO ACTIVE PLAYBACK
zADJUST THE VOLUME CONTROL TO THE DESIRED LEVEL.
zUSE PAUSE KEY WHEN YOU WANT TO STOP PLAYBACK TEMPORARILY.
zPRESS STOP / EJECT KEY WHEN FINISHED.
RECORDING
A. RECORDING FROM TAPE (DECK 2 TO DECK 1)
THIS UNIT ENABLES YOU TO DUPLICATE A PRE-RECORDED TAPE TO ANOTHER TAPE. IT IS PERFORMED
ONLY ONE WAY FROM DECK 2 (PLAYBAK) TO DECK 1 (RECORDING).
DUBBING AT NORMAL SPEED
zPRESS THE “ TAPE ” FUNCTION BUTTON.
zINSET A PRE-RECORDED CASSETTE INTO DECK 2 AND A BLANK CASSETTE TAPE INTO DECK 1.
zPRESS THE “ PAUSE ” KEY AND THEN PRESS THE “ RECORD ” AND “ PLAY ” KEY AT DECK 1.
zPRESS THE “ PLAY ” KEY TO START PLAYBACK AT DECK 2 & THEN PRESS “ PAUSE ” KEY AT DECK 1 TO
START DUBBING.
zPRESS “ PAUSE ” KEY AT DECK 1 & “ STOP ” KEY AT DECK 2 WHEN FINISH.
EN-5

DUBBING AT HIGH SPEED
THIS UNIT IS QUIPPED WITH A HIGH SPEED DUBBING SYSTEM WHICH CAN SAVE THE TIME FOR DUBBING
BY 2/3 WHEN COMPARE TO NORMAL SPEED.
zPRESS THE DUBBING BUTTON TO “ HI “ POSITION AND THEN FOLLOW THE SAME PROCEDURES AS
STIPULATED IN “DUBBING AT NORMAL SPEED”.
zWHEN DUBBING A PRE-RECORDED CASSETTE TAPE AT HIGH SPEED, A CHATTERING SOUND IS BEING
HEARD. TO AVOID THIS, SET THE VOLUME CONTROL TO A MINIMUM LEVEL.
zDO NO ACTIVE/DE-ACTIVE THE “HI-NOR. DUBBING” BUTTON DURING DUBBING, THIS WILL VARY THE
SPEED OF RECORDING AND MAY BE DAMAGE THE CASSETTE TAPE.
B. RECORDING FROM RADIO
zPRESS “RADIO” BUTTON TO ACTIVE RADIO MODE
zTUNE TO THE DESIRED STATION AND INSERT A BLANK CASSETTE TAPE IN DECK 1.
zPRESS “RECORD” & “PLAY“ KEY TO START RECORDING.
zPRESS “PAUSE” KEYS AND THEN “STOP/EJECT” KEY WHEN FINISH.
¾DURING RECORDING OF AM, BEATING WHISTLE AT SOME RECEPTION STATIONS MAY HAPPEN, BY
SELECTING “BEAT CUT 1-2” SWITCH MAY HELP TO REDUCE THE BACKGROUND NOISE.
C. RECORDING FROM CD
zPRESS THE “CD” FUNCTION BUTTON.
zINSERT A BLACK CASSETTE TAPE IN DECK 1 WHICH SUITABLE FOR RECORDING.
zPRESS “PAUSE” KEY FIRST AND THEN “RECORD” & “PLAY“ KEY AT CASSETTE. RECORDING FUNCTION IS
NOW ON STAND BY.
zACTIVATE THE CD PLAYER, AND THEN PRESS “PAUSE KEY” AT CASSETTE TO START RECORDING.
zTO STOP RECORDING, PRESS “STOP” BUTTON ON CD PLAYER FIRST, THEN PRESS THE “PAUSE” KEY
AND THEN “STOP/EJECT” KEY ON CASSETTE TAPE DECK.
MORE FEATURES
A. SLEEP SETTING
1. PRESS & HOLD THE “ SLEEP/TIMER ” BUTTON, TO ACTIVE & ADJUST THE SLEEP TIMER IN THE ORDER
OF 90 > 80 >70….10 MINUTES AUTOMATICALLY.
2. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.
3. TO CANCEL THE SLEEP MODE, PRESS AND HOLD “ SLEEP/TIMER ” BUTTON UNTIL “ SLEEP ” INDICATOR
DISAPPEAR.
B. TIMER SETTING (BY REMOTE HANDSET)
THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY SOFT CD
MUSIC OR RADIO.
* PRESS THE “ MODE ” BUTTON ON REMOTE HANDSET, THE LCD DISPLAY WILL SHOW THE INFORMATION
AS FOLLOWING ORDER:-
1) CURRENT TIME
2) ON TIME SETTING: PRESS “ MEM/CLOCK ADJ. ” KEY & THEN “ SKIP +/- ” TO SET THE TIME. THEN
PRESS “ MODE “ BUTTON TO STORE THE ALARM STARTING TIME.
3) OFF TIME SETTING: PRESS “ MEM/CLOCK ADJ. ” KEY & THEN “ SKIP +/- ” TO SET THE TIME. THEN
PRESS “ MODE “ BUTTON TO STORE THE ALARM SWITCH OFF TIME.
4) MODE: PRESS “ MEM/CLOCK ADJ. ” KEY & THEN “ SKIP +/- ” TO SET THE MODE (CD
OR TUNER). THEN PRESS “ MODE ” BUTTON TO COMPLETE THE SETTING.
* PRESS THE “ MODE ” BUTTON REPEATLY TO REVIEW THE PRESETS TIME IN ORDER.
¾THE PROGRAMMING WILL AUTOMATICALLY CANCEL IF NO BUTTON IS BEING PRESSED IN A PERIOD OF
ABOUT 10 SECONDS.
zACTIVE/DE-ACTIVE TIMER FUNCTION
1. PRESS THE “ SLEEP/TIMER ” BUTTON ONCEC & THE TIMER INDICATOR IS SHOWN ON LCD
2. TO CANCEL ALARM FUNCTION BY PRESS AGAIN “SLEEP/TIMER” BUTTON UNTIL THE TIMER INDICATOR
“ ” DISAPPEAR
EN-6

C. PRESETS EQ FUNCTION
THIS UNIT PROVIDES 5 DIFFERENCES SOUND MODE TO ENHANCE YOUR LISTENING EXPERIENCE. YOU
CAN SELECT THE DESIRED EFFECT BY PRESSING THE “EQ” BUTTON REPEATEDLY AT FOLLOWING
SEQUENCE:-
FLAT JAZZ ROCK CLASSIC POP
D. MUTE FUNCTION
PRESS TO TERMINATE THE SOUND OUTPUT FROM SYSTEM TEMPORARILY AND PRESS AGAIN TO CANCEL
THIS MODE.
E. REMAIN FUNCTION (BY REMOTE HANDSET)
PRESS TO INDICATE THE TIME MODE ON LCD DISPLAY DURING CD PLAYBACK
EACH STEP SWITCH AS BELOW:-
IN CD MODE
TRACK PLAYING TIME TRACK REMAINING TIME DISC REMAINING TIME DISC PLAYING TIME
REMOTE CONTROL TRANSMITTER
CONTROL FUNCTIONS
BATTERY INSTALLATION (BATTERY NOT PROVIDED)
THE INFRA-RED TRANSMITTER REQUIRE 2 PCS “ AAA “ BATTERY FOR OPERATION
EN-7

BUTTON DESCRIPTION
OPEN/CLOSE PRESS TO OPEN & CLOSE THE CD DOOR
POWER PRESS TO SWITCH THE SYSTEM INTO STANDBY MODE
DISC 1,2,3 PRESS TO SELECT THE DISC FOR PLAYBACK DIRECTLY
DISC-CH PRESS TO SELECT THE NEXT DESIRE DISC AND ROTATE THE DISC TRAY
SLEEP PRESS TO ACTIVE SLEEP FUNCTION
TIMER PRESS TO SET THE ALARM MODE ON/OFF
PHONO PRESS TO ACTIVE PHONO MODE
EQ PRESS TO SELECT EQ MODE
MUTE PRESS TO ACTIVE MUTE FUNCTION
CD PRESS TO ACTIVE CD MODE
TAPE PRESS TO ACTIVE TAPE MODE
TUNER/BAND PRESS TO ACTIVE TUNER MODE AND SELECT RADIO BAND
VOLUME -/+ CONTROL VOLUME UP DOWN
SKIP UP/DOWN IN CD MODE : TO SELECT PREVIOUS / NEXT CD TRACK
IN TUNER MODE : PRESS TO STEP UP/DOWN OF FREQUENCY
PLAY/PAUSE IN CD MODE, PRESS ONCE TO START PLAYBACK. PRESS ONCE AGAIN TO
STOP THE DISC PLAY TEMPORARILY
STOP IN CD MODE, PRESS TO TERMINATE CD PLAYBACK
IN TUNER MODE, PRESS TO SELECT THE RADIO BAND
REPEAT/M-UP IN CD MODE : PRESS TO ACTIVE THE REPEAT FUNCTION
IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN ORDER
RANDOM/M-DOWN IN CD MODE : PRESS TO ACTIVE THE RANDOM PLAYBACK FOR CD MODE
IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN BACK
REMAIN/RDS MODE IN CD MODE : PRESS TO DISPLAY THE REMAINING TIME OF CD PLAYBACK
IN TUNER MODE : PRESS TO SELECT RDS MODE & INFOMRATION ON LCD
MEMORY/CLK-ADJ IN STANDBY MODE, FOR CLOCK SETTING
IN TUNER MODE, FOR PRE-SETTING OF RADIO STATION INTO MEMORY
MODE TO REVIEW AND SET THE ALARAM ON/OFF TIME
INTRO/RDS SEARCH IN CD MODE : PRESS TO START THE INTRO SCAN PLAYBACK
IN TUNER MODE : PRESS TO SELECT THE RDS PROGRAM TYPE FOR
SEARCHING
EN-8

INSTRUCTIONS ON ENVIRONMENT PROTECTION
DO NOT DISPOSE OF THIS PRODUCT IN THE USUAL HOUSEHOLD GARBAGE AT THE END
OF ITS LIFECYCLE; HAND IT OVER AT A COLLECTION POINT FOR THE RECYCLING OF
ELECTRICAL AND ELECTRONIC APPLIANCES. THE SYMBOL ON THE PRODUCT, THE
INSTRUCTIONS FOR USE OR THE PACKING WILL INFORM ABOUT THE METHODS FOR
DISPOSAL.
THE MATERIALS ARE RECYCLABLE AS MENTIONED IN THIS MARKING. BY RECYCLING,
MATERIAL RECYCLING OR OTHER FORMS OF RE-UTILIZATION OF OLD APPLIANCES, YOU
ARE MAKING AN IMPORTANT CONTRIBUTION TO PROTECT OUR ENVIRONMENT.PLEASE
INQUIRE AT THE COMMUNITY ADMINISTRATION FOR THE AUTHORIZED DISPOSAL
LOCATION.
ALL RIGHTS RESERVED
COPY RIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com
EN-9