Philips MCM159/98 User manual

Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
MCM159
1
Quick Start Guide
2
User Manual
Quick Start Guide User manual
ALB/
PRESET
3
1
2
Remote Control
MCM159_QSG_Eng 2008.5.9, 11:411

1
2
Connection
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the AC power outlet.
Tip:
It is unnecessary to connect the FM pigtail antenna since it
is fixed to the main unit.
speaker
(right)
speaker
(left)
FM wire antenna
AC power cord
FM
AERIAL
AU
HEADPHON
X
E
2
1
MCM159_QSG_Eng 2008.5.9, 11:412

5
1
2
3
4
Setting the clock
In standby mode, press and hold CLOCK/DISPLAY on the
remote control set for 2 seconds.
Press PROG to select 12-hour or 24-hour display.
Press CLOCK/DISPLAY to confirm.
➜The clock digits for the hours flash.
Press TUNING 4 ¢ (à/ áon the remote control)
to set the hours.
Press CLOCK/DISPLAY again.
➜The clock digits for the minutes flash.
Press TUNING 4 ¢ (à/ áon the remote control)
to set the minutes.
Press CLOCK/DISPLAY to confirm the time.
6
7
1
2
3
4
5
Playing a disc
Select CD source.
Lift the CD door on the top of the system to open the CD compartment.
Insert a disc with the printed side facing up and press down
on PULL TO OPEN to close the CD door.
PressÉÅto start playback.
Press 9to stop playback.
PROG.
ALB/
CLOCK/DISPLAY
PRESET
CLOCK/DISPLAY
PROG.
PROG.
ALB/
CLOCK/DISPLAY
PRESET
MCM159_QSG_Eng 2008.5.9, 11:413

2008 CKoninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com
PDCC-2008
Tip:
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
1
2
Select TUNER source.
Press PROG on the remote control for more than two seconds to program all available stations
in order of waveband.
Press ALBUM/PRESET +/- until the desired preset station is displayed
Programming and tuning to radio stations
3
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or AUX,
for example).
–Then select the desired function ( 2;,
í, ëfor example).
MCM159_QSG_Eng 2008.5.9, 11:414