Denver PFF-1160HWHITE User manual

Before connecting, operating or adjusting this product, please read this user’s manu- al
carefully and completely.
If the user manual is not printed in your local language, then please enter our website to see
if it is found online under the model you have. The website address is: www.denver-
electronics.com
ENGLISH
USER MANUAL
PFF-1160HWHITE

ENG-1
1. POWER
After connecting power adapter, please press and hold power button for approximately 5 seconds (until screen
turns on).
When it is on, press and hold power button for approximately 3 seconds to access reboot or power off menu.
Short press on power button will turn off/onscreen (but leave the photo frame in on position).
2. USB
Connect a USB flash drive. USB is for service use only.
3. RESET
Use a needle or paper clip to reset unit.
4. MicroSD card
Load external max 32GB microSD memory card here.
5. DC
Connect DC adapter to power on the device.
4 2 5 3
1

ENG-2
User Manual
Version: 1.5.1

ENG-3
Contents
Getting started.................................................................................................................................... 4
Frameo app........................................................................................................................................ 4
Frameo quick setup............................................................................................................................ 5
Start using frameo .............................................................................................................................. 5
Connecting a new friend:.................................................................................................................... 5
Navigating your frameo....................................................................................................................... 6
Settings .............................................................................................................................................. 8
My frame ............................................................................................................................................ 8
Manage photos................................................................................................................................... 8
My Friends.......................................................................................................................................... 9
Display and slideshow ...................................................................................................................... 10
Wi-Fi................................................................................................................................................. 11
Backup and Restore......................................................................................................................... 11
About................................................................................................................................................ 12
Help.................................................................................................................................................. 12
Privacy.............................................................................................................................................. 12
Support............................................................................................................................................. 12
Warranty, Compliance, Support and Safety information.................................................................... 13

ENG-4
Getting started
Thank you for purchasing your very own frameo.
First, to set up your frame follow the ‘Quick start guide’ included in the package. If you are
new to using frameo then start by following the frameo quick setup on page or follow the on
screen guide when powering it on for the first time.
Once you have set up your Frameo frame, start connecting it to your friends and family.
Frameo app
To send photos to your frame, use the frameo app for iOS or Android
Find the frameo app on:
Google play by searching for “frameo” or scan this QR code
App Store by searching for frameo or scan this QR code

ENG-5
Frameo quick setup
When starting your frame for the first time, you will need to setup the frame.
●First you start by selecting a language. This will be the language used throughout
frameo.
●Connect your frame to the internet by connecting it to a Wi-Fi.
If a newer version of the frameo software is available, then you will be prompted
with an update dialog. It is recommended to update your frame immediately if
prompted.
●Enter your name, and the location where you have placed your frame e.g. “Living
room”, “Kitchen” or “Office” and finally set the timezone if not correct.
Start using frameo
Start by connecting with your friends and family by providing them with a unique code from
your frame.
If you want to be able to send photos to the frame yourself, start by downloading the app for
iOS or Android on App Store or Google Play. Then use the code to connect your frame and
app as described below.
Connecting a new friend:
●Make sure that your friend has downloaded and installed the frameo app
●Click the add friend icon on your frame . A dialog will appear showing a unique
code which is valid for 12 hours.
●Now share this code in whatever fashion you prefer e.g. SMS, E-Mail, IM, phone
call, to your friend.
●Once your friends have added the code in their frameo app, they will automatically
appear on your frame and be able to send you photos.
●Read chapter Change options for a friend to allow connected friends, to retrieve
and share the connection code via the smartphone app.

ENG-6
Navigating your frameo
Swipe left or right to go through your photos.
To access the menu, simply tap once on the screen.
In the menu you will find the most used features.
Add friend
This will generate a code that you can share with your friends and family so they can connect and
send photos to your frame.
Gallery
Opens a gallery which allows for easy and fast navigation through your photos.
Settings
Opens the Settings.
Hide photo
Hides the current photo. This means that the photo will no longer be shown in the slideshow. If
needed the photo can be shown again through the settings menu.
Fit to frame/Fill frame
This toggles how the photo is shown.
The Fill frame option is the default. The photo is scaled so that it fills the whole screen. It will be
centered around what is selected as the most important part. See the first picture below.
Fit to frame will make sure that the entire photo is shown on the screen. See the second picture
below.

ENG-7
Adjust photo
The adjust photo feature is only available when the photo is set to fill frame. It allows you to adjust the
position of photo in the frame for an even better fit.
Interacting with videos
When a video is shown two additional controls are shown. One for play/pause of the video and one
for mute/unmute of the video.
Press to start the video playback. Pressing will pause the video playback.
Pressing will mute the video while pressing will unmute the video.
Power menu
Tap the power icon in the top right corner of the screen to access the power menu. Here you can
power off or restart your frame and make it go into sleep mode.
NB. Make sure to always use the power off button on the device or in the power menu to turn

ENG-8
Frameo off. Never disconnect power when Frameo is running.
Settings
Through settings, you can personalize your frame to your needs.
My frame
Frame name:
Changes the name of your frame. This is also the name the connected friends and family will
see in their list of connected frames.
Frame location:
Changes the location of your frame. This is the location displayed on your friends' and family's
list of connected frames which can help to distinguish frames from each other.
Set language:
Sets the language throughout your frame.
Enable/Disable 24-hour format
Enables, and disables, 24-hour time format.
Set time zone
Sets the timezone that should be used on your frame.
Sleep mode:
frameo offers a sleep mode which turns off the screen to reduce power consumption while
you
e.g. are sleeping. Its default setting is to turn off the screen at 23:00 and turn on the screen
again at 07:00. To change this just set the sleep mode start/end time.
Your frame is not powered down or in standby, so you will still be able to receive photos
during sleep mode.
Manage photos
Show/hide photos:
Select which photos to hide by tapping the particular photos you wish to hide. Hidden photos
will NOT be deleted from your frame, you can always select them to be shown again.

ENG-9
Use to hide or show all photos.
Delete photos:
Select photos that you want to permanently delete from your frame by tapping the photo. Use
to select or deselect all and to delete the selected photos.
Import photos:
Allows you to import photos from an external max 32GB SD card.
Before you try to import photos from a SD card, make sure you have a SD card with photos
on inserted into your frame.
Start by selecting the photos that you want to import onto your frame. Once selected tap the
import button to start the import process.
It is currently not possible to add a caption or define the most important part of the photo
when using the import function. Alternatively add yourself to your friend list and send them
using the app.
Export photos
Allows you to export photos from the frame to external storage (e.g. microSD card).
The export function will export all photos on the frame as well as profile pictures.
My Friends
This list contains all the people that are allowed to send photos to your frame.
Change options for a friend
Click the options icon to open the friend options menu. From here you can allow/disallow if a
friend may share the code to the frame. If this is enabled the friend can retrieve and share the code to
the frame from his/her app.
From the options menu you can also delete a friend, by pressing the DELETE FRIEND button. This
will remove the friend from the list and thereby remove their permission to send photos to the frame.
You will then be asked to confirm the removal and if you would like to remove all photos previously
received from this friend.
Remove person
To remove a person from this list, thereby removing their permission to send you photos, tap
the delete icon . You will then be asked to confirm the removal and if you would like to
remove all photos received from this person.
Add person