Denver DPF-701MIX User manual

DENVER DPF-701MIX User Manual
Digital Photo Frame
WARNING
The power adapter cable/disconnect device shall remain easy to operate/disconnect.
1

Introduction
Congratulations on your purchase of Digital Photo Frame.
Before operating the unit, please read this manual thoroughly and keep it for future
reference. This manual will help you use many of the exciting features to make your
Digital Photo Frame iew more enjoyable.
The Digital Photo Frame enables you to iew digital pictures directly from your
camera’s memory card. You can also create a slide show with multiple transition
effects. No computer, digital camera, or internet connection is required.
●Play back of photo files stored in data stored de ices through USB 2.0 port or
arious card-reader port, or internal memory.
●Supports SD,MMC, MS card.
●Compatible with most digital cameras stored JPEG images files.
2

●Automatic slide show with multiple transition effects and adjustable display time.
●Insert the memory card with slots facing you. Do not force the memory card in the
slot.
●If you are not able to easily insert the memory card completely, you may ha e
inserted it in a wrong way.
Note: D F = Digital hoto Frame.
recautions and Maintenance
●For indoor use only
●To a oid risks of file or electric shock; do not expose this appliance to moisture.
●To a oid o erheating; do not block the entilation holes on the back of the DPF at
any time.
●Keep your Digital Photo Frame out of sunlight. Direct sunlight may cause damage.
●Do not dismantle the DPF. There is a risk of electric shock, and there are no user
ser iceable parts inside. Dismantling your Digital Photo Frame will oid your
3

warranty.
●Do not use the Digital Photo Frame if conditions could allow condensation to
occur, or damage may result.
●Bracket installed, the use of the process, the prohibition of anti-clockwise 360-
degree rotation, so as not to loose.
D F Side view
●DC: Input the DC power adapter to the DPF player.
●SD/MMC/ MS card: The socket for DPF player to
connect the SD/MMC/MS card .
●USB Host: The socket for DPF player to the USB
memory.
4
DC
SD/MMC/MS Card
USB Host

layer Overview
Key control and Key function:
1. ENTER Button: Confirms your selection, and pause or play.
2. LEFT SHIFT Button ( ): Left cursor select function and to iew the next
photo.
3. RIGHT SHIFT Button ( ): Right cursor select function and to iew the
pre ious photo.
5

4. MENU Button: Displays the photo frames menu options.
5. U Button ( ▲ ): Up cursor select function or rotate photo clockwise.
6. DOWN Button ( ▼ ): Down cursor select function or rotate photo clockwise.
7. STANDBY Button: Press this button two seconds to ON and OFF, Press one
time to come back to the pre ious menu.
8. Bracket jack.
Assemble the Digital Photo Frame bracket to prop the unit up. Insert adapter DC
plug into the DPF player first, then plug the power cord to a standard wall outlet.
If you insert your memory card or USB flash dri e into the frame, the images stored
on the memory card or USB flash dri e will begin to appear automatically on your
screen.
6
DPF

Functions
●SELECT CARD
7
DPF

In the slide show model, Press Standby button three times to show de ice select
menu. Press arrow buttons to select Card, U Disc or inside memory, Press Enter
button confirm (Fig1).
●MAIN FUNCTIONS
After selected de ice, you can press arrow buttons to select the main functions, such
as Slide Show, hoto and Calendar (Fig2), Press Enter button into the selected
8
Fig1 Fig2

function mode.
1. Slide Show: This function menu allows you press Enter button to enter slide
show mode, the player will auto show photo.
2. hoto: This function allows you to pre iew photos in single window or six
windows.
3. Calendar: This function shows calendar and clock to user.
●HOTO FUNCTION
In this function mode (Fig 3).
1. Press arrow buttons to select photos pre iew
in six windows.
2. Press Enter button to display pictures.
3. Press Menu button to show Setup menu in
the pause situation of slide show.
4. Press Standby button to exit to the main function mode.
9
Fig3

●CALENDAR FUNCTION
In this function mode, the player shows
calendar and clock to user (Fig 4).
1. Use the arrow buttons; you can look up the
calendar show on the left of DPF.
2. You can also slide show photo in a small
window if the selected card has jpg files.
3. Use Standby button to exit calendar show.
Setup your D F
Press Menu button to enter into setup menu. In the Setup menu, you can use the
arrow buttons to select one item to setup or operate. When the item is show in gray
color, you cannot deal with it at that moment (Fig 5).
10
Fig4

1. Image Size: Setup display mode for slide
show. Include Auto Fit, Optimal and Panel
Scan three modes.
2. Slide Show Effect: Special effects shown to
transition one photo to the next in a slide show.
3. Slide Show Interval: The time amount the
next photo is displayed.
4. Split Slide Show: The picture number of the display model under the Split Slide
Show is one or four.
5. Start Slide Show: Starts the slide show.
6. Rotate: Rotate the displayed photo 90 counter-clock-wise (In the pause situation
of slide show).
7. Zoom: Zoom in the displayed photo. When in zoom state, you can just do zoom
or exit operation (In the pause situation of slide show).
8. Save icture: Copy selected files or current file from a memory card to built-in
11
Fig5

memory (In the pause situation of slide show).
9. Delete File: Delete selected files or current file (In the situation of six windows).
10.Format memory: Formatted in memory all the files.
11. Reset Setting: Reset all settings to factory default alues.
12. Language: Change the language for the player.
13. Brightness, Contrast, Color and Tint: Adjust the Brightness, Contrast, Color
and Tint alue for screen.
14. Time: Set the internal clock and date.
Specification
Resolution 480*3(RGB)*234
Power adapter Input 100-240V AC, Output DC5V 1A
12

Working Temperature -10 to +50℃
File Format JPEG
Cards supported SD/MMC/MS/USB
Accessories Power adapter, User’s manual, Bracket
13

14
Electric and electronic equipment contains materials, components and
substances that can be hazardous to your health and the en ironment, if
the waste material (discarded electric and electronic equipment) is not
handled correctly.
Electric and electronic equipment is marked with the crossed out trash
can symbol, seen below. This symbol signifies that electric and electronic
equipment should not be disposed of with other household waste, but
should be disposed of separately.
All cities ha e established collection points, where electric and electronic
equipment can either be submitted free of charge at recycling stations and
other collection sites, or be collected from the households. Additional
information is a ailable at the technical department of your city.

ALL RIGHTS RESERVED
COP RIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com
15