Denver BTL-60 User manual

Instruction Manual
BTL-60
www.denver-electronics§.com

Bluetooth Speaker
USER GUIDE
BTL-60
Operation Instruction
When you turn on the speaker, it will y standard start in Bluetooth model. You can
then easily pair with your smartphone or PC with Bluetooth function. If you don’t pair
it within 10 minutes, the speaker will go into sleep mode, and you have to turn it off/on
to pair again.
Press “M” button to switch functions,

Button Instruction :
1ON / OFF: ower Key
2LINE port：3.5 audio input port
3 lay/ ause：ause and play in play mode.
4 Volume down/ RE: Long press to decrease volume. In FM mode, short press to switch RE
frequency ,In music mode, short press to switch previous song.
5 Volume up / Next: Long press to increase volume, In FM mode, short press to switch to next
frequency, In music mode, short press to switch to next song
6 M - mode switch：switch to FM radio mode, in “FM” mode,long press 3 seconds to Tune.
(Note: short press=hold the key for less then 1 second, Long press=hold the key for
a out 3 seconds )
Light control button:

1. light mode utton:
How to turn ON and OFF
ON: turn the key to ON position; OFF: turn the key to OFF position,
How to connect Bluetooth de ices ( Mobile Phone / Laptop /IPHONE /IPAD, etc )
1. Turn on speaker and make sure it is in Bluetooth mode. The lue indicator flashes,
and a eep sounds.
2. Enter Bluetooth settings on your smartphone or PC, find BTL-60 on the list over
Bluetooth units, and choose it to pair.
Light flash when on mode (full color sine move up and down)
press 1st mode 1(full color conversion with double line.
press 2nd mode 2 (Multicolor Rotating combination of graphics)
press 3rd mode 3 (two color conversion with double line)
press 4th mode 4 (multicolored arrows scroll)
press 5th mode (light off )
press th light (full color move up with light bar
press again light back to default status.

3.After successful pairing, the speaker will give a eep, and on your phone it will
show that the speaker is connected. If you need to enter a password when pairing,
please enter "0000".
4. After successful connection, Bluetooth devices can play to the speaker. Blue light
will flash slowly when it is in Bluetooth play mode.
How to use AUX input mode.
In any mode, insert 3.5mm to the Bluetooth speaker, and to the audio source you want
to listen to. The Bluetooth speaker will automatically change to AUX input.
How to operate FM radio
Press M to enter FM mode. Then long press to make automatically search for
channels. The lue indicator flashes. When finished, the system will automatically play
the first found station. Short pressor to change stations.
Note: Please insert USB ca le for etter FM receival. It works as an antenna.
How to charge the speaker
Please charge the speaker efore first time use. Plug one part of the USB charge ca le
into the speaker Micro USB port, and the other part to a computer USB port or an
external USB adaptor (not included). Charging the attery fully may take up to 8 hours (
first time please extend charging time). When charge is finished the red indicator will
turn off.
How to use mobile NFC
Turn on the “NFC” on the phone (if phone supports NFC function). Put the phone close
to the speaker ottom and scan. The phone will ask: ”connect with BTL-60”. Push “OK”
and the speaker will connect.
FAQ
Cannot connect and play
1) Check Bluetooth settings on your phone or PC. (some pc’s cannot e used for
Bluetooth audio)
2) Check if the speaker are properly charged. If the red indicator flashes when you turn
on the speaker, please charge it.
3) Please turn off , pair the Bluetooth unit again, and try once more.
*If the a ove doesn’t solve your pro lems, please contact the store where it is ought.
Bad radio reception
★ Re- search the station at a open place
★ Insert USB ca le as external antenna to enhance reception

Specifications:
Speaker Specification：40MM×3W
Output：3W*2
Frequency Response：200Hz-20KHz
Sensitivity：100db±5db
SNR:≥90DB
Distortion：≤5％
Bluetooth specification：Bluetooth 3.0
Bluetooth Communication rotocol：
Support Advanced Audio Transmission Mode( A2D ) Ver 1.2
Supports remote control mode (AVRC ) support Ver 1.0
Bluetooth Communication Range：More than 10M
Power Supply：Built-in Lithium
Charging Time：8 hours（first time, please extend charging time）
Bluetooth Play Time ：8 hours
Adapter：Micro USB Port, 3.5 AV input Port
Dimension：157mm* 70mm

ALL RIGHTS RESERVED, CO YRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contains materials, components and
substances that can be hazardous to your health and the environment, if the waste material (discarded
electric and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out trash can symbol,
seen below. This symbol signifies that electric and electronic equipment and batteries should not be
disposed of with other household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the approriate and designated
facility. In this manner you make sure that the batteries are recycled in accordance with legislature
and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries
can either be submitted free of charge at recycling stations and other collection sites, or be collected
from the households. Additional information is available at the technical department of your city.
Imported by:
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
Hereby, Inter Sales A/S, declares that this model DENVER BTL-60 is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.
A copy of the Declaration of Conformity may be obtained at
Inter Sales A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark