Dermalogic YAN-TSAPP-24 User manual

Towel Steamer User Manual
(ITEM# YAN-TSAPP-24/36/48/72/120)
Operating Instructions
1. These products are rated at 110 VAC, 700W, and 6 amps.
2. Plug in the power and adjust the temperature to 65°C for towel steamer and adjust to 80°C- 95°C if using
as a food steamer.
3. Fill up the water tank with dislled water, not tap or ground water.
•For Model 24, open the door and add 1,000cc – 1,500cc water directly into the water tank.
•For Models 36/48/72/120, add water to the water intake on the top of the unit. Fill up the tank unl
the light turns on; otherwise, the heang element will be easily damaged.
4. When there is not enough water, the heang element will automacally turn o, and the warning light
will be on.
5. To preserve the life expectancy of the heang element, always maintain the water level and ll up the
water before the light turns on.
6. The machines use the water level sensor to check the water level, so always keep the machine on a at
surface, otherwise the heang element will burn out and won’t be able to cut o the electricity from the
heang element.
Maintenance
1. The water tank needs to be cleaned every 2 – 3 months.
2. Make sure the electricity is turned o and the machine has cooled down before you clean the machine.
3. Aer the machine cools down, loosen the two screws in the boom front of the machine.
4. Remove the black tub in the front.
5. Use a container or bucket to hold the leover water from the machine.
6. Fill more water in the water tank for couple mes to wash the inside of the machine. Inside of the Tub is
smaller, so slowly add the water into the water tank.
7. Clean the black tub from the le and right side.
8. Put back all the parts together aer the machine is cleaned.
Warning: Please, do not wash the machine directly in the water, Or the machine will be damaged.

Warning
1. Do not add any fragrances to the machine, or its life expectancy will be shortened, even damaged.
2. If there are any broken wires or parts, please contact the original manufacturer for a replacement to
prevent any further damage.
3. When the machine is being used, please be cauous with high temperatures.
4. Keep children away from the machine due to the high temperature.
5. Stand away from towel steamer when opening. The hot air or steam which escapes can cause burns to
hands, face and/or eyes.
6. The machine cannot be immersed in water.
7. Aer using the machine, keep the steamer’s door open to prevent the odor. If you are using it as a food
steamer, please set the ming to one hour and thirty minutes or above.
Safety Precautions
1. Stop all operaons when the machines can’t funcon normally, or it is damaged.
2. Do not put the plug or wires into the water.
3. Keep the machine away from the sink, bathtub, kitchen, or any other water ulies.
4. Keep the wires away from high temperature.
5. Due to the safety issues, it comes with a safety grounded plug. Please do not remodel the plug.
6. Do not touch the plug when your hands are wet.
7. Do not take the machine apart due to chances of electric leakage and shock.
Trouble Shooting
Problem
Cause
Soluon
Power light not on
The plug is not connecng
well with the wall socket
Use an instrument to check the wall sockets.
Unplug the plug and wait for 10 seconds to put back in.
No heang
Heang element went bad
Replace heang element
Towel Steamer
has odor
Towel is causing the odor
The towel steamer shouldn’t have any odor; the best
way is to change the towels. Don’t use any fragrances.
No water in
heang element
room
Clogged pipes
Check the black tube in the boom front of machine,
and clean them if necessary
Towel Steamer is
leaking
Too much water
Only ll up the water ll the light turns on
If you have any problem with the above, please contact with your manufacturer or contact our customer
Service.