DEVANTI IM-ZB-12B-RD User manual

ICE MAKER
MODEL: IM-ZB-12B-RD
USER MANUAL
Please read this user manual carefully before using the product.
Please retain this manual for future reference.

CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ............................................................................ 2
COMPONENTS AND FUNCTIONS ...................................................................................... 3
PREPARATION BEFORE USE ............................................................................................... 4
OPERATIONS .............................................................................................................................. 5
TROUBLESHOOTING .......................................................................................................... 5
SSPECIFICATIONS .................................................................................................................... 6
CIRCUIT DIAGRAM ................................................................................................................. 6
PARTS LIST ................................................................................................................................. 7
DISPOSAL ................................................................................................................................. 8

2
IMPORTANT SAFETY INSTRUCTIONS
Your safety and the safety of others are vey importnat. We have provided many important safety
messages in this manual when using the appliance. Always read and obey all safety messages.
This is the safety alert symbol. All safety messages will follow the safety alert symbol and
the word DANGER or WARNING. These words mean that you can be killed or seriously
injured if you do not follow immediately the safety instructions given.
All safety messages will tell you what the potential hazard is, how to reduce the chance of injury and
what can happen if the instructions are not followed.
When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire,
electric shock, and injury to persons or property. Read all instructions before using any appliance.
· This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made
by childen without supervision.
· Do not operate this or any other appliance with a damaged cord. If the supply cord is damaged, it
must be replaced by the manufacturer or similarly qualified personnel in order to avoid a hazard.
· The ice maker must be positioned so that the plug is accessible. It must be connected to properly
polarised outlets only. No other appliance should be plugged into the same outlet. Be sure that the
plug is fully inserted into the receptacle.
· Do not run the power cord over carpeting or other heat insulators. Do not cover the cord. Keep the
cord away from traffic areas, and do not submerge in water.
· The use of an extension cord is not recommended as it may overheat an become a fire risk. If an
extension cord must be used, it has to be No. 0.75mm
2
minimum size and rated no less than
16A/250V with a plug.
· Unplug the ice maker before cleaning or making any repairs or servicing.
· Exercise caution and use reasonable supervision when the appliance is used near children.
· Do not use the ice maker outdoors. Place the ice maker away from direct sunlight and make sure that
there is at least 100mm of space between the back of the unit and wall. Keep a minimu distance of
at least 100mm on each side of the unit free from any surface or obstruction.
·· Do not use any liquid other than water to make ice cubes.
· Do not clean the ice maker with flammable fluids. The fumes can create a fire hazard or explosion.
· Do not tip over the ice maker.
· If the ice maker is brought in from outside in winter time, let it stand for a few hours until it reaches
room temperature before plugging it in.
· This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
· Please dispose of the appliance according to local regulations.
· Do not store combustible substances such as aerosol cans with a flammable propellant in this appliance.
· This appliance is intended to be used in a household and similar applicatons such as:
· staff kitchen areas in shops, offices and other working environments
· farmhouses and by customers in hotels, motels, and other residential-type environments
· bed and breakfast-type envirnments
· catering and similar non-retail applications
· WARNING: Keep ventilation opening in the appliance enclosure or in the built-in structure clear of
obstructions.
· WARNING: Do not damage the refrigerant circuit.
· WARNING: Do not use mechanical devices or other means to accelerate the defrosting or ice harvesting
process other than those recommended by the manufacturer.
· WARNING: Do not use other types of electrical appliances inside the ice maker.
·· This appliance must be earthed.

1. Ice scoop
2. Ice cubes full sensor
3. Ice cube basket
4. Lid with transparent window
5. Air outlet
6. Water drainage plug
77. Maximum water level mark
(only visible when ice cube basket
is removed)
3
COMPONENTS AND FUNCTIONS
A. Ice cube size indicators
S: Small L: Large
B. Power button
C. Ice Full indicator
D. Add Water indicator
E. ON/OFF button
To start/stop the unit
F. Ice cube size selection
Control panel

4
PREPARATION BEFORE USE
A. SETTING UP
B. CONNECTING
C. CLEANING
1. Remove the exterior and interior packaging. Check that the ice basket and ice scoop are included.
If any parts are missing, contact our Customer Service immediately.
2. Clean the ice maker (see Section C below).
3. Find a location to place your ice maker that is away from direct sunlight and other sources of heat
(such as a stove, furnance or radiator). Place the ice maker on a level surface. Make sure that there
is at least 100mm of space around the back and sides of the ice maker with adjacent walls.
44. Allow one hour for the refrigerant fluid to settle before plugging in the unit.
5. The appliance must be positioned so that the plug is easily accessible.
WARNING: Use only potable water for making ice cubes
1. The unit must be properly grounded for your safety. The power cord of this appliance is equipped
with a grounding plug that mates with a standard grounded wall outlet to minimise the possiblity
of an electric shock.
2. Plug in the appliance into an exclusive and properly installed grounded wall outlet. Do not under any
circumstances damage the grounding means of the plug. Any questions concerning power and/or
grounding should be directed to a certified electrician.
33. This appliance requires a standard 220-240V, 50Hz electrical supply with good grounding means.
4. The wires in the mains lead are coloured in accordance with the following code:
Green and yellow: Ground
Blue: Neutral
Brown: Live
Before using the ice maker, it is strongly recommended that the ice maker is cleaned thoroughly.
1. Remove the ice cube basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. Then use the solution to rinse the inner parts and drain out the solution by unplugging the water
drainage plug at the side of the ice maker.
4. Clean the exterior of the ice maker regularly with a mild detergent solution and warm water.
55. Dry the interior and exterior with a soft cloth.
6. When the appliance is not in use for a long time, drain the water completely from the ice maker
by opening the water drainage plug.
NOTE: The gas inside the ice maker is flammable. Please dispose this appliance in accordance with
national regulations.
DANGER: Improper use of the grounded plug may result in the risk of electric shock.
If the power cord is damaged, please contact our Customer Service immediately.

5
OPERATIONS
1. Open the cover and remove the ice cube basket. Then pour potable water into the water reservoir.
Keep the water below the water level mark.
2. Press the ON/OFF button on the control panel to turn on the unit to begin the ice cube making
process.
3. Select the size of the ice cube by pressing the SELECT button. Choose small or large-size ice
cubes. If the room temperature is lower than 16°C, it is recommended to select small-size ice cubes
to prevent them from sticking together.
4. The ice cube making cycle lasts between 6 and 13 minutes, depending on the size of the ice cube
selected and the ambient temperature. The recommended ambient (room) temperature for making
ice cubes is from 10°C to 43°C.
5. While the ice maker is on, check the water level periodically. If the water pump cannot inject water
into the ice maker, the ice maker will stop automatically and the ‘Add water’ indicator will light up.
Press the ON/OFF buton and fill up water to the water level mark. Then press the ON/OFF button
again to turn on the unit. Allow the refrigerant liquid inside the compressor to settle for at least 3 mins
before restarting the ice cube making process.
6. The ice maker will stop automatically when the ice cube basket is full and the ‘Ice full’ indicator will
light up.
WARNING; Direct sunlight or sunlight reflection may cause the infra red sensor to malfunction. If the
unit does not stop, the ice cubes may be obstructing the sensor. Move the unit to where it is not
exposed to any sunlight.
77. Change the water in the water reservoir every 24 hours to ensure a reasonable hygiene level. If the
unit is not in use, drain all remaining water in the reservoir.
TROUBLESHOOTING

6
SPECIFICATIONS
CIRCUIT DIAGRAM

7
PARTS LIST

8
DISPOSAL
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle responsibly to promote sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact
your local authority for environmental-safe recycling.