DEVANTI IM-ZB-18F-SS User manual

PORTABLE ICE MAKER
MODEL: IM-ZB-18F-SS
USER MANUAL
Please read this user manual carefully before using the product.
Please retain this manual for future reference.

CONTENTS
SAFETY PRECAUTIONS ...................................................................................................... 2
COMPONENTS AND FUNCTIONS ...................................................................................... 4
SPECIFICATIONS .................................................................................................................... 5
CIRCUIT DIAGRAM ................................................................................................................. 5
PREPARATION BEFORE USE ........................................................................................... 6
OOPERATING INSTRUCTIONS ............................................................................................... 7
CLEANING AND MAINTENANCE ......................................................................................... 9
TROUBLESHOOTING .............................................................................................................. 10
WARRANTY ................................................................................................................................ 11
DISPOSAL ................................................................................................................................. 11
1

2
SAFETY PRECAUTIONS
Your safety and the safety of others are vey important. We have provided many important safety
messages in this manual when using the appliance. Always read and obey all safety messages.
This is the safety alert symbol. All safety messages will follow the safety alert symbol and
the word DANGER or WARNING. These words mean that you can be killed or seriously
injured if you do not follow immediately the safety instructions given.
All safety messages will tell you what the potential hazard is, how to reduce the chance of injury and
what can happen if the instructions are not followed.
When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire,
electric shock, and injury to persons or property. Read all instructions before using any appliance.
· This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made
by childen without supervision.
· Do not operate this or any other appliance with a damaged cord. If the supply cord is damaged, it
must be replaced by the manufacturer or similarly qualified personnel in order to avoid a hazard.
· The ice maker must be positioned so that the plug is accessible. It must be connected to properly
polarised outlets only. No other appliance should be plugged into the same outlet. Be sure that the
plug is fully inserted into the receptacle.
· Do not run the power cord over carpeting or other heat insulators. Do not cover the cord. Keep the
cord away from traffic areas, and do not submerge in water.
· The use of an extension cord is not recommended as it may overheat and become a fire risk. If an
extension cord must be used, it has to be No. 0.75mm
2
minimum size and rated no less than
16A/250V with a plug.
· Unplug the ice maker before cleaning or making any repairs or servicing.
· Exercise caution and use reasonable supervision when the appliance is used near children.
· Do not use the ice maker outdoors. Place the ice maker away from direct sunlight and make sure that
there is at least 100mm of space between the back of the unit and wall. Keep a minimu distance of
at least 100mm on each side of the unit free from any surface or obstruction.
·· Do not use any liquid other than water to make ice cubes.
· Do not clean the ice maker with flammable fluids. The fumes can create a fire hazard or explosion.
· Do not tip over the ice maker.
· If the ice maker is brought in from outside in winter time, let it stand for a few hours until it reaches
room temperature before plugging it in.
· This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
· Please dispose of the appliance according to local regulations.
· Do not store combustible substances such as aerosol cans with a flammable propellant in this
appliance.
· This appliance is intended to be used in a household and similar applicatons such as:
· staff kitchen areas in shops, offices and other working environments
· farm houses and by customers in hotels, motels, and other residential-type environments
· bed and breakfast-type environments
· catering and similar non-retail applications

3
SAFETY PRECAUTIONS
Risk of fire/flammable materials used. Please adhere to local regulations regarding disposal of the
appliance due to its flammable gas.
• WARNING: Keep ventilation opening in the appliance enclosure or in the built-in structure clear of
obstructions.
· WARNING: Do not damage the refrigerant circuit.
·· WARNING: Do not use mechanical devices or other means to accelerate the defrosting or ice
harvesting process other than those recommended by the manufacturer.
· WARNING: Do not use other types of electrical appliances inside the ice maker.
· This appliance must be earthed.
The wires in the mains lead are coloured in accordance with the following code:
Green or Green and yellow Grounding
Blue Neutral
Brown Live
To avoid a hazard due to instability of the appliance, ensure that it must be placed on a flat or even
surface.
WARNING

4
COMPONENTS AND FUNCTIONS
Control panel
A. LCD display
B. ON/OFF button
C. ‘+’ timer button
D. ‘-’ timer button
1. Water reservoir cover
2. Top lid
3. Water separator pipe
4. Evaporator
5. Ice cubes basket
6. Ice scoop
7. Control panel
8. Air outlet
9. Water drainage plug
LCD display
1 Ambient temperature
2. Ice cube making timer
3. Error indicator
4. Ice cube making indicator
5. Ice making time setting
66. ADD WATER indicator
7. ICE FULL indicator
8. ON/OFF indicator

5
SPECIFICATIONS
CIRCUIT DIAGRAM

6
PREPARATION BEFORE USE
A. SETTING UP
B. CONNECTING
C. CLEANING
1. Remove the exterior and interior packaging. Check that the ice basket and ice scoop are included.
If any parts are missing, contact our Customer Service immediately.
2. Clean the ice maker (see Section C below).
3. Find a location to place your ice maker that is away from direct sunlight and other sources of heat
(such as a stove, furnance or radiator). Place the ice maker on a level surface. Make sure that there
is at least 100mm of space around the back and sides of the ice maker with adjacent walls.
44. Allow one hour for the refrigerant fluid to settle before plugging in the unit.
5. The appliance must be positioned so that the plug is easily accessible.
WARNING: Use only potable water for making ice cubes
1. The unit must be properly grounded for your safety. The power cord of this appliance is equipped
with a grounding plug that mates with a standard grounded wall outlet to minimise the possiblity
of an electric shock.
2. Plug in the appliance into an exclusive and properly installed grounded wall outlet. Do not under any
circumstances damage the grounding means of the plug. Any questions concerning power and/or
grounding should be directed to a certified electrician.
33. This appliance requires a standard 220-240V, 50Hz electrical supply with good grounding means.
Before using the ice maker, it is strongly recommended that the ice maker is cleaned thoroughly.
1. Remove the ice cube basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. Then use the solution to rinse the inner parts and drain out the solution by unplugging the water
drainage plug at the side of the ice maker.
4. Clean the exterior of the ice maker regularly with a mild detergent solution and warm water.
55. Dry the interior and exterior with a soft cloth.
6. When the appliance is not in use for a long time, drain the water completely from the ice maker
by opening the water drainage plug.
DANGER: Improper use of the grounded plug may result in the risk of electric shock.
If the power cord is damaged, please contact our Customer Service immediately.

7
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
1. Open the cover of the water reservoir and pour potable water into the water reservoir. Be sure to
keep the water below the maximum level at the FULL mark shown in the drawing below. Replace
the cove immediately to prevent any foreign matter from contaminating the water.
2. Plug the unit into the wall outlet. Press the ON/OFF button on the control panel to turn on the unit to
begin the ice cube making process.
3. When the unit is plugged in, the symbol will flash. Press the ON/OFF button on the
display and the unit will start making ice cubes. The symbol will always be on display and the
symbol will also be constantly on.
4. The top of the display will show the ambient temperature and duration of the ice cube making
process. The flashing numbers on the right side of the ambient temperature display shows the end
of the ice making process. The numbers on the lower right of the display is the settings for the ice
cube making duration. The default is ‘0’.
WARNING: Do not pour water into the internal water tank located underneath the ice cubes
basket. This tank is not large enough and will affect the ice cube making process.
NOTE: The ice cube making cycle last about 15 to 25 minutes depending on the ambient temperature.
When making ice cubes for the first time, depending on the initial water temperature, the ice cube
making duration will be a little bit longer. In an extremely hot environment, the ice cube making duration
may vary extensively but will not exceed 40 minutes.

8
OPERATING INSTRUCTIONS
5. To adjust the thickness of the ice cubes, press ‘+’ or ‘-’ on the control panel. For thicker ice cubes,
press ‘+’ to prolong the processing time. Press once to add a minute longer. The maximum time
to extend the processing time is 6 minutes. Once the appliance is restarted, it will reset to ‘0’.
TIP: Press ‘+’ and ‘-’ simultaneously for more than 5 seconds and the LCD display blue light will come
on. It can be used as a night light. Press again to switch off the light.
6. Each time the ice cube making process is completed, the symbol will flash. The water in the
water reservoir will automatically fill up the inner water tank. Throughout this process, the symbol
will flash until the water in the inner water tank has reached its maximum water level.
7. When the water reservoir is out of water, the inner water tank cannot be filled and the symbol
will stay on. The appliance will also stop working. After filling water into the water reservoir, restart
the appliance or wait for 20 minutes for an automatic restart.
88. The ice cube making process will automatically stop when the ice cubes basket is full and the
symbol will light up in the LCD display.
9. Change the water in the water reservoir every 24 hours to ensure a reasonable hygiene level. If the
unit is not used for a long time, drain all water inside the inner water tank and water reservoir.
10. To drain the water, remove the water drainage plug at the back of the unit.
Take out the silicon plug and drain away the water inside. It is recommended
to change the water every day and clean the unit every 3 days.
WARNING
A. Make sure that the water reservoir, water filter and water separator pipe are not blocked. Clean
them regularly.
B. The water temperature will affect the ice cube making capacity. A lower water temperature will
produce more ice cubes.
C. A cooler ambient temperature will also help the unit to produce more ice cubes.
DD. Always use good quality water to ensure that the pump will work well. Poor quality water will
produce some pump noise but it will not affect the unit operations.
E. The compressor will restart in 3 minutes after you have turned off the unit.
NOTE
· Check to ensure the water filter located at the bottom of the large water reservoir and inner water
tank are not obstructed by any dirt or foreign matter.
· Always fill up water in the large water reservoir to the maximum water level.
· After moving or shifting the unit, allow the refrigerant inside the compressor to settle for at least
3 minutes before restarting.

9
CLEANING AND MAINTENANCE
After using the ice maker for a period of time, it is suggested to clean the unit thoroughly. The water
separator pipe and water filter must be cleaned periodically.
1. If the water separator pipe is blocked, and there is no water flowing through even though the
compressor and water pump are still working, please turn off the unit. Disassemble the down pipe
and clean it. Clean each hole of the pipe as shown in the drawing below. After cleaning, re-install
the water separator pipe and ensure that the right terminal of the pipe connects to the silicone
pipe as well as its original attachment.
2. For the large water reservoir and inner water tank, clean them with diluted detergent, warm water
and a soft cloth. Then use the water to rinse the inside and drain out the water through the water
drainage port at the back of the unit. This will help to keep the unit hygienically clean and ensure
proper functioning.
3. If you find ice cubes left in the evaporator while cleaning and they cannot be removed easily, turn on
the unit to enter into the ice cube making process. Then press and hold the ON/OFF button on the
display for more than 5 seconds to let the unit start the ice harvesting process to melt the ice cubes.
This will help to remove the stuck ice cubes.
DRAINING WATER COMPLETELY
FROM INNER TANK AND WATER RESERVOIR
To drain the water, remove the water drainage plug at the
back of the unit but do not turn on the unit. Wait for a
few minutes for the water to drain out.

10
OPERATING INSTRUCTIONS
TROUBLESHOOTING

11
OPERATING INSTRUCTIONS
WARRANTY
The manufacturer provides warranty in accordance with Australian legislation with a minimum of
one year starting from the date on which the appliance is sold to the end user.
The warranty only covers defects in materials or workmanship.
The repairs under warranty may only be carried out by an authorised service centre. When making
a claim under the warranty, the original invoice with purchase date must be submitted.
The warranty will NOT apply in cases of:
• Normal wear and tear
• Incorrect use, such as overloading of the appliance and use of non-approved accessories
• Use of force and/or damage caused by external influences
• Damage caused by non-observance of the user manual, such as connection to an unsuitable
mains supply or non-compliance with installation instructions
• Partially or completely dismantled appliances
DISPOSAL
This marking indicates that this product should not be disposed with other household
waste. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote sustainable use of material resources.
To return your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for safe recycling.