DeviceWell MVP9110 User manual

SDI 10-Screen Multiview
Model: MVP9110
VAR 2.0
Users’ Manual

I
Precautions
To ensure the reliability, use and safety of the equipment, please observe the following when
installing, using and maintaining.
Before the device is powered on, it is necessary to check to ensure that the chassis is well
grounded to prevent electrostatic discharge from the chassis and endanger the equipment and
personal safety, and to provide good shielding effect.
◆Do not place system equipment in a location that is too cold or too hot.
◆The power supply of the device will generate heat during operation, so keep the working
environment well ventilated to avoid damage to the device due to excessive temperature.
◆Turn off the main power switch when it is rainy or wet or when it is not used for a long
time.
◆Non-professionals, please do not try to open the equipment case without permission, and
do not repair it yourself to avoid accidents or damage to the equipment.
◆Do not spill any chemicals or liquids on or near the equipment.

II
Contents
1. Product Introduction............................................................................................................ 1
1.1. Product Overview.....................................................................................................1
1.2. Product parameters ................................................................................................... 2
1.3. Standard configuration list........................................................................................3
2. Operation and Function Description...................................................................................3
2.1. Equipment operation.................................................................................................3
2.2. Multi-screen Mode Description................................................................................4
2.2.1. 1-screen mode ................................................................................................ 4
2.2.2. 4-screen mode ................................................................................................ 4
2.2.3. 6-screen mode ................................................................................................ 4
2.2.4. 8-screen mode ................................................................................................ 5
2.2.5. 9-screen mode ................................................................................................ 5
2.2.6. 10-screen mode .............................................................................................. 5
2.3. Keypad Operation Instructions.................................................................................6
2.3.1. Channel switching operation..........................................................................6
2.3.2. Full Panel........................................................................................................6
2.3.3. Mode...............................................................................................................6
2.3.4. Reso................................................................................................................6
2.3.5. Audio..............................................................................................................6
2.3.6. Char................................................................................................................7
2.4. LCD function............................................................................................................7
2.4.1. Open the software...........................................................................................7
2.4.2. CONTROL module........................................................................................ 7
2.4.3. UMD module..................................................................................................8
2.4.4. COLOR module .......................................................................................... 8
2.4.5. SETTING Module.......................................................................................9
2.5. Menu usage and LCD display instructions............................................................. 10
2.5.1. Startup LCD status display...........................................................................10
2.5.2. MENU.......................................................................................................... 11
2.6. Tally function..........................................................................................................15
2.7. RST reset.................................................................................................................15
3. Fault and maintenance.......................................................................................................15
3.1. Common faults and Solutions.................................................................................16
3.2. maintain ..................................................................................................................16
3.3. Warranty description...............................................................................................16
3.3.1. Guarantee information.................................................................................. 16
3.3.2. Warranty limitations and exceptions............................................................16
4. Appendix........................................................................................................................... 17
4.1. Version and production information.......................................................................17

1
1. Product Introduction
1.1. Product Overview
This is a professional-grade SDI picture splitter that supports 10-CH SDI inputs, 2-CH
HDMI inputs, and 2-CH AV inputs. 2-CH SDI+3-CH HDMI output. You can change the display
resolution to 1080i50 / 60, 1080p25 / 30 or even more using the front panel keyboard. The device
is a multi-screen splitter with 10-way matrix switching. The device can connect 10 SDI signals.
When performing multi-picture synthesis, there are 2 identical SDI outputs (the two left SDI
interfaces) and 3 HDMI outputs. The display mode of the screen can be flexibly configured
through the network port using PC software. , can be configured for 1~10 screens. And the device
supports SDI audio column display and character overlay function. The device integrates SDI
input/output interface and control interface, which can conveniently process SDI signals for
picture segmentation, signal delay, frequency conversion processing, and frame synchronization.
The device supports network, RS422 and button control, and supports network interface to update
internal software, which can realize more functions and simple operation.
Main Functions
◆Art design style
◆Up to 10 signal inputs, up to 5 signal outputs
◆Support single screen enlargement, 4 screens, 6 screens, 9 screens, 10 screen modes
◆Support input screen switching
◆Support audio column display, audio de-embedding and embedding, optional any input audio
plus embedded output
◆Chinese and English character overlay (character color can be changed)
◆Input port: SDI ×10;
◆Output port: SDI ×2; HDMI ×3
◆Input support matrix switching function
◆SDI HD/SD Adaptive
◆Support network, RS422 and button control
◆Support network upgrade system function
◆Support for later extension
◆Support TALLY function
◇Special features can be customized

2
1.2. Product parameters
Name
SDI HD 10-Screen Multiview
SDI Input
Input Signal
SDI HD serial digital video signal
Rate
143Mbps~2.97Gbps
Connector
BNC complies with IEC169-8
Reflection loss
>15dB 5MHz~3GHz
Signal amplitude
800mV±10%
Impedance
75Ω
Balance
100m Belden 1694A HD
200m Belden 8281A HD
SDI Output
Output Signal
SDI HD serial digital video signal
Connector
BNC complies with IEC169-8
Reflection loss
>15dB 5MHz~3GHz
Signal amplitude
800mV±10%
Impedance
75Ω
Up/Down time
0.6ns±100ps
DC offset
0V±0.5V
Clock recovery
Auto output optional
Overshoot
<5%
Jitter
<0.2Ul
HDMI Output
Output Signal
Standard HDMI signal
Rate
270Mbps~2.97Gbps
Signal amplitude
800mV±10%(100R)
Impedance
100Ω
Control
Parameter
Local control
button (front panel)
Serial control
RS422
Connection port
RJ45 standard network interface (UDP/HTTP)
Control software
WINDOWS (customizable IOS/Android)
Optional
components
Central control keyboard
General
Parameters
Power supply
100-240V/AC 50/60Hz
Power Rating
25W-150W, According to host type
Size
1U(standard power supply )
Control Panel
YES
Weight
2.1KG
Operating
Temperature
0℃~50℃without condensation
Storage
Temperature
-20℃~75℃
Working Humidity
20%~70%RH
Storage Humidity
0%~90%RH, No condensation

3
1.3. Standard configuration list
Matrix Master
AC power cord x 1
Control software x1
User Manual x1
2. Operation and Function Description
2.1. Equipment operation
Note: Please use the following installation sequence. If the installation sequence is not
followed correctly, the device may not work or work abnormally.
(1) Connect the signal output of the signal source to the input of the unit.
(2) Configure the corresponding I/O card according to the input and output of the site.
(3) Connect the signal output of this unit to the signal input of the display unit.
(4) Turn on the power of the device and turn on the power button switch.
(5) Use the manual button to select the input and output ports.
(6) Rear panel interface description:
①SDI×2(Multi-screen output) ②HDMI×3(Multi-screen output) ③SDI×10 input
④RS422 interface ⑤RST Reset ⑥Power Indicator
⑦Network and USB interface ⑧AC 100 –240V

4
2.2. Multi-screen Mode Description
2.2.1. 1-screen mode
2.2.2. 4-screen mode
2.2.3. 6-screen mode

5
2.2.4. 8-screen mode
2.2.5. 9-screen mode
2.2.6. 10-screen mode

6
2.3. Keypad Operation Instructions
2.3.1. Channel switching operation
Switching operation can be performed according to the input signal and the multi-screen
window number. IN x OUT y (such as switching the 2nd signal to the 5th display, IN + 2 + OUT
+ 5), you can also switch all the way at the same time. To multi-channel display, IN 2 OUT 1, 2, 3,
4.... If you want to switch 10 channels, press 10+ first, then press 0.
2.3.2. Full Panel
In the multi-screen switching, you can select a certain way to display in full screen, press
the full screen window number + Full Panel (such as the full screen display of 5 screens in the 16
screen: 5 + Full Panel), press the Full Panel button again to return In the multi-picture state, if the
channel switching operation has just been performed, the OUT is in the light-on state, and it is
necessary to first press OUT to turn off the light and then perform full-screen operation.。
2.3.3. Mode
Multi-screen mode switching, there are six modes of 1, 4, 6, 8, 9, 10 to select, you can press
the Mode button to cycle.
2.3.4. Reso
Output resolution setting, press the Reso button to switch between different output
resolutions, a total of 1080p60, 1080p50, 1080p30, 1080p25, 1080i50, 1080i60, 720p60, 720p50
eight resolution options.
2.3.5. Audio
Switch the display or hide of the audio columns of all channels.

7
2.3.6. Char
Switch between displaying or hiding the characters of all channels.
2.4. LCD function
When Mode is switched, the LCD will display the current multi-picture status, and the
number in the small grid represents the current input channel number.
When you perform a software upgrade, the status of the upgrade and the version information
of the program are displayed. 10 description of screen character setting control software
10 description of screen character setting control software
2.4.1. Open the software
Run the EXE file and click the "search" button to list the devices. Select the corresponding
device with the left mouse button to read the display mode, characters and audio column status of
the current device. The software function is divided into four modules:
2.4.2. CONTROL module
Click the CONTROL icon to enter the module. Under this module, you can control the
device output screen mode and select the input signal source of each window.
Note: the device IP address and the computer local IP address should be in the same network segment. This software will be updated
continuously. If you need the latest software, please contact us. The software in this example is
AVMATRIX_UI_r_v1.0.1.4_20170627.exe。