Dewils Horizons Series User manual

The DeWils Horizons Series
European-Style Frameless Cabinetry
Installation Guide
www.dewils.com

DeWils Industries, Inc.- July, 2008

DeWils Industries, Inc.- July, 2008

DeWils Industries, Inc.- July, 2008

DeWils Industries, Inc.- July, 2008
Now that your cabinets are
installed, the doors and drawer
fronts must be adjusted to ensure
perfect cabinetry lines. Beginning
with the doors, loosen the
appropriate screw, adjust the door
into position and tighten the screw
again. Repeat this until all doors
are adjusted properly.
Next, align the drawer fronts.
The following pages will guide you through the proper alignment the two drawer systems offered
by DeWils.

DeWils Industries, Inc.- July, 2008
Wood Drawer Box Adjustments
Tandem Installation, removal and adjustment information
DeWils reserves the right to make changes to products without notice

DeWils Industries, Inc.- July, 2008
Stainless Steel Drawer Adjustments
Installation, removal and adjustment
Side Adjustment –Grey Plastic Cam –Turn both cams equally
Cam Height Adjustment –Gold Color Screw - Loosen and move Drawer head, retighten
Tilt Adjustment For Larger Drawer Heads
Twist the chrome rods clock wise or counter clock
Note: drawer heads 8” and larger will have one rod per side. Drawer heads 12” and larger will have 2 rods per side
DeWils reserves the right to make changes to products without notice. July, 2008