DHR 150CB Series User manual

S
I
N
C
E
1
9
2
2
ADVANCED MARITIME
SIGNALLING SOLUTIONS
Den Haan Rotterdam
Fascinatio Boulevard 1182
2909 VA Capelle a/d IJssel
The Netherlands
T+31 (0) 10 413 07 55
[e-mail]
www.dhr.nl
19JUN-2.6
INSTRUCTION MANUAL
Den Haan Rotterdam
DISCLAIMER
Despite constant care and attention DHR puts in its manuals it
is still possible that information in this manual is incomplete or
incorrect.
We do not guarantee that the information in the manual is suit-
able for the purpose for which the information was consulted.
All information is offered in the state in which it actually is and
without any (implicit) guarantee or warranty regarding its va-
lidity or its suitability for a particular purpose or otherwise. All
illustrations are for illustrative purposes only. This manual is not
intended to cover every possible detail about the product.
We exclude all liability for any damages, direct or indirect, of
any nature whatsoever, arising from or in any way connected
with the use of this manual. In addition we are not liable for dam-
ages, direct or indirect, arising from the use of information ob-
tained from this manual.
A user of this manual may not publish copyright protected works
or other information from the manual or in any way reproduce
the information without our permission. This also includes the
reproduction of information or parts thereof by publication in an
electronic (computer) network.
Den Haan Rotterdam
S
i
n
c
e
1
9
2
2
DHR150/180/210/220 CB-series
Manual Controlled Searchlights
DIMENSIONS
Figure 1
Max. 35
Max. 35
300
218
200 200
Ø 214
312
Approx.± 15˚
Height
(See table)
156
Max. 35
Width
(See table)
Height
(See table)
Approx.± 15˚
3 x Ø 7
120˚
Ø 92
Ø 73
Dimensions in mm.
220CB
Mounting holes
Extension tube
250-330-500mm
210CB
150CB/180CB
Navigation Lights
Signalling Lights
Searchlights
Whistles

Den Haan Rotterdam
SEARCHLIGHT
Model 150CB-LED 180CB-LED 210CB220 210CB110 210CB024 220CB220 220CB024
Dimensions
Height (above deck) 249 mm 285 mm 300 mm 312 mm
Height (cabin) 156 mm 156 mm 200 mm 200 mm
Width 151 mm 186 mm 218 mm 214 mm
Weight 4,6 Kg 5,5 Kg 4,6 Kg 4,6 Kg
Electrical
Voltage 10-32 VDC 10-32 VDC 230 VAC 115 VAC 24 VDC 230 VAC 24 VDC
Advised lamp fuse T2A T3A F6.3A F10A F16A F2A F16A
Cable type H07RN-F 2x1,5 -1,5 mtr H07RN-F 2x1,5 -1,5 mtr H05GG-F 3G1,5 - 1,5 mtr (special heat resistant) H05GG-F 3G1,5 - 1,5 mtr
(special heat resistant)
Cable diameter Ø 6-9 mm Ø 6-9 mm Ø 6-9 mm Ø 6-9 mm
Optics
Mirror Polycarbonate lens Polycarbonate lens Sealed beam lamp Aluminium Reflector
Range 447 m 592 m 593 m 630 m 700 m 345 m 700 m
Adjustable Focus No No No No No No No
Beam angle at 50% 3° x 2,5° 3° x 2,5° 12° x 9° 12° x 6° 7° x 8° 9,5° x 7,5° 5,5° x 3°
Luminous intensity 200.000 cd 350.000 cd 352.000 cd 400.000 cd 500.000 cd 120.000 cd 500.000 cd
Bulb
Model 15003 18003 CP60 FNN GE4552 64516 64657 HLX
Luminous flux - - - 7400 lm 9000 lm
Rated lamp voltage 10-32 VDC 10-32 VDC 240 V 120 V 28 V 230 V 24 V
Rated lamp wattage 10 W 20 W 1000 W 1000 W 250 W 300 W 250 W
Average life-time 50.000 h 50.000 h 300 h 800 h 25 h 75 h 300 h
Color temperature 6000 K 6000 K 3200 K 3200 K - 3150 K -
Base Splicing connector Splicing connector GX16D GX16D Screw terminals G6.35 G6.35
Housing
Material Stainless steel 316 Stainless steel 316 Seawater resistant aluminium Seawater resistant aluminium
Finish Brushed Brushed UV resistant powder coating - White RAL9016 UV resistant powder coating
- White RAL9016
Front glass Hardened glass Hardened glass - Hardened glass
Seals Neoprene, black Neoprene, black - Silicone
Cable gland PG13.5 PG13.5 M20x1.5 M20x1.5
Ball joint bracket
Material Stainless steel 316 - Brushed Stainless steel 316 - Brushed Stainless steel 316 - Brushed Stainless steel 316 - Brushed
Type T-handle T-handle D-grip handle D-grip handle
Environmental conditions
Operating temperature - 40° / + 55° C - 40° / + 55° C - 25° / + 45° C - 25° / + 45° C
Ingress protection class IP56 IP56 IP X5 IP66 c/w Membrane vent
MOUNTING INSTRUCTIONS
TIPS FOR CORRECT USE
• Switch off the searchlight immediately after use. This will in-
crease the life span of the light source
• Do not enlight objects closer than 2 metre
• Clean the searchlight regularly with fresh water
• Do not point the light beam at the eyes of human beings
INSTALLATION SCHEMES
Bulb (see table)
F1A
S1
+
-
PE
(Relay min. 20A)
Art. no.: BURT151
Lamp fuse
(see table)
12VDC / 24VDC
Bulb (see table)
110-120VAC / 220-240VAC
Lamp fuse
(see table)
S1
L
N
PE
Figure 2
Metaalwarenfabriek Den Haan Rotterdam B.V. hereby declares that their marine searchlights are designed and constructed
conform the Council directives 72/23/EEC and 93/68/EEC
applicable harmonised standard(s) : IEC598-1
• Drill the mounting holes according to figure 1
• Unscrew the securing bolt and remove the handle/grip
• Remove spring and mounting ring
• Place the searchlight on the deck with the mounting ring at the
bottom and lock the searchlight with the s.s. bolts
• Reinstall the spring and the grip
• Switch off the main power on board
• Depending on the electrical installation connect the searchlight
according to figure 2.
• Switch on the main power
• When in doubt consult an electrical technician