Dialighting LED Par IP65 RGB User manual

DIALighting LED Par IP65 RGB
User manual

Please read the manual before operation.
1. Voltage:AC 100V-240V, 50Hz/60Hz
2. Power consumption: 140W
3. LED: IP 65 Outdoor Die Casting Par, Tri-150W RGB(RGBW optional)
4. Beam angle: 35°,20°,(90°optional)
5. DMX channels: 3,5,7CH
6. Operation mode: LCD display
7. Working temperature: -10℃~40℃
8. Dimension: 315x180x345 mm
9. Net weight: 5.7kgs
10.DMX linking: 30pcs
11.Power linking: 6pcs/110V, 12pcs/240V
12.Lumen:
R
383lux@2m
G
919lux@2m
B
175lux@2m
FULL
1343lux@2m
B. OPERATION
This product has rich effect programs; there are seven working modes, press “MODE” button could switch the
modes.
Built-in Program mode
Auto running mode
Slave mode
DMX mode
Dimming mode
Setting mode
Info mode

Mode Switching
1. Built-in Program mode
There are 9 built-in program modes; You could press “UP” or “DOWN”,
1) static color mode，press “UP” and “DOWN”
2) Static color strobe setting
Press “SETUP” button enters to set the strobe speed, press “UP” and “DOWN” to change the value.
3) Other programs
Press “SETUP” button enters to set the speed and strobe.
2. Auto running
This mode is Auto Running mode; the fixture will automatically run the programs according to the preset program
~ .

3. Master/slave Mode
This mode is M/S Mode; the salve fixtures will follow the programs after they were linked to the master fixture
via DMX cables.
4. DMX Mode
This is DMX mode. When it is linked with DMX cable, it could be controlled by controller or software.
DMX Address setting
a.
CH1
CH2
CH3
Red
Green
Blue
0~255
0~255
0~255
b.
CH1
CH2
CH3
CH4
CH5
Dimmer
Red
Green
Blue
Strobe
0~255
0~255
0~255
0~255
5~255
c.
CH1
CH2
CH3
CH4
CH5
CH6
CH7
Dimmer
Red
Green
Blue
Program
Speed
Strobe
0~255
0~255
0~255
0~255
CH2~4
0
Color Marco
DMX
Value
R(0)G(0)B(0)
0~9
R(255)G(0)B(0)
10~19
R(255)G(63)B(0)
20~29
R(255)G(127)B(0)
30~39
R(255)G(191)B(0)
40~49
R(255)G(255)B(0)
50~59
R(191)G(255)B(0)
60~69
R(127)G(255)B(0)
70~79
R(63)G(255)B(0)
80~89
R(0)G(255)B(0)
90~99

Program01
1~30
R(0)G(255)B(63)
100~109
5~255
R(0)G(255)B(127)
110~119
R(0)G(255)B(191)
120~129
R(0)G(255)B(255)
130~139
R(0)G(191)B(255)
140~149
R(0)G(127)B(255)
150~159
R(0)G(63)B(255)
160~169
R(0)G(0)B(255)
170~179
R(63)G(0)B(255)
180~189
R(127)G(0)B(255)
190~199
R(191)G(0)B(255)
200~209
R(255)G(0)B(255)
210~219
R(255)G(63)B(255)
220~229
R(255)G(127)B(255)
230~239
R(255)G(191)B(255)
240~249
R(255)G(255)B(255)
250~255
Program 02
31~61
0~255
Program 03
62~92
Program 04
93~123
Program 05
124~154
Program 06
155~185
Program 07
186~216
Program 08
217~247
Program 09
248~255
5. Dimming Mode
This mode is dimming mode. You could select the value of single color to get the color you want.
6. Setting Mode
This mode is setting mode. There are two options:

1) LCD Backlight time
There are 4 kinds of time setting: 10s, 20s, 30s, 60s
2) Restore Factory Setting
This function is for fixture factory restoration. All the data will be initialized after operation:
7. Info Mode
This mode is information mode.
1) Product item number
2) Temperature control
Normal: Temperature control is normal
Warning! Error: Temperature control is abnormal
3) Version
NOTE
1. Press the “MODE” and “SETUP” at same time for a few seconds to restore factory settings, the data will be
initialized.
2. Be care with your operations. You endanger your own safety and others, please follow the operation in this
manual.
3. When the fixture operated in a environment temperature which is beyond the scope of parameter allows, if the
temperature is higher than allows, please reduce full power use time, to prevent overheating damage fixture.
4. When the fixture power on, if the display shows , please check the cables inside the fixture.
5. Please do not operate when power on to avoid safety accident.