WRIGHT 98490023 User manual
Operator’s Manual
LIGHT BAR MOUNTING KIT
FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT IN SERIOUS INJURY OR DEATH.
Read this manual and other manuals that came with your mower before operating.
©1998-2019 Wright Manufacturing, Inc. All rights reserved. This material may not be reproduced or copied, in whole or part, without written permission
from Wright Manufacturing, Inc. Grass Gobbler, Gobbler, Leaf Gobbler, Velke, Pro 1, X2, Stander, and Sentar are trademarks of Wright Manufacturing.
Brackets and Hardware Only. Light Not Included.
Revised July 2021
P/N 98490023
Instructions
1. Attach Wright mounting brackets to caster
using the bolt and nut included in the kit.
a. Insert tab vertically, then rotate to be
horizontal
b. Use the conguration appropriate for the
tube size on the mower
2.0” x 1.0” 2.5” x 1.5” 3.0” x 2.0”
2. Assemble light bar according to
manufacturer’s instructions
3. Mount light using a bolt (not included) through
the bottom of the light bar bracket.
4. Adjust spacing of mounting brackets as
needed.
Kit Contents
PN DESCRIPTION QTY.
11990183 BOLT, CARRIAGE, 3/8-16 x 4 Z5 2
12990065 NUT, FLANGE NYLOCK 3/8-16 Z5 2
93490046 WRIGHT LIGHT MOUNTING BRACKET 2
93490047 WRIGHT LIGHT BAR BOTTOM LOCK 2
Light bar not included. Compatible light bars will have the following features:
1. Maximum length = 20”
2. Adjustable mounting points
3. Mounts using 5/16 (M8) bolt
Table of contents
