Diamond IND-35/DH User manual
Mod: IND-35/DH
Production code: ADV1762-A
04/2022
11
Professional inducon hob
IND-25/DH
IND-30/DH
IND-35/DH
Dear Customer,
We would like to congratulate you on the purchase.
This one has been manufactured according to the very latest developments, using modern,
safe electrical and electronic components.
Please take the me to read this user’s guide before using this appliance.
Thank you for your condence in our products.
12
This product complies with current EU direcves. We cerfy this in the EU compliance statement. We
can send you a copy of the compliance statement in queson if required.
The packing materials in which this appliance is packed are recyclable. Please recycle them by disposing
of them in the appropriate containers at your local facility. In so doing, you will be making a
contribuon to the protecon of the environment.
At the end of its useful life, the appliance to be scrapped must be destroyed in accordance with the applicable
naonal regulaons that govern the eliminaon and recycling of waste.
We recommend you contact a company that specialises in waste disposal.
To avoid all risks associated with the destrucon of the appliance, ensure that it is disconnected from
themains and that the mains cable is removed.
When destroying the appliance, local rules and the applicable regulaons in your country or
geographical zone must be adhered to.
IND-25/DH — IND-30/DH — IND-35/DH
:Freestanding inducon cooking appliance
Stainless Steel / Aluminium / Ceramic Glass
2500 / 3000 / 3500 Was
Single-phase 230V +/-10% 60Hz
10A / 13A / 15A
Capacive touchs board
310 x 385 x h110 mm
280 x 280 x 4 mm
160 mm (220 mm for IND-35/DH)
280 mm
25 kg
4 kg
13
f a crack appears in the surface of the glass, disconnect the appliance immediately
from the mains supply to avoid the risk of electric shock. To do this, remove the fuses
or operate the cut-o switch.
nly appropriate cookware should be placed on the hob. Do not put any other object on it, no maer what it is.
nsure that the mains cable of any electric appliance that is plugged into a socket located in the immediate vicinity
of the hob does not come into contact with the cooking zones.
hen cooking, never use aluminium foil and never place products that are wrapped in aluminium or frozen
products in aluminium trays, on the hob. The aluminium will melt and will permanently damage your appliance.
o not clean your hob with huge amounts of water. Use a lile bit of household alcohol.
o not use a steam cleaner.
f the mains cable is damaged, it must be replaced by the manufacturer, their Aer Sales Service or a person with
similar qualicaons to avoid risk.
his appliance is not intended for use by anyone (including children) whose physical, sensory or mental capacies
are reduced, or lacking experience or knowledge, unless they have been able to benet from prior instrucons as
to the use of the appliance or supervision by a person who is responsible for their safety.
upervise children to ensure that they do not play with the appliance.
sers should exercise cauon if wearing items such as rings, watches or similar objects when using the appliance
since these may heat up when posioned very close to the cooking surface.
nly use pans of the type and size recommended.
epairs must only be carried out by a technician who has been trained or recommended by the manufacturer.
Take care that the coang and the surrounding areas do not contain metal surfaces.
Your inducon cooking appliance is not intended to be operated by means of an external mer or a separate
remote control.
The funconing of the hob complies with the currently applicable norms concerning electromagnec
disturbance. Your inducon cooking hob therefore fully meets the legal requirements (89/336/CEE
direcves). It has been designed not to cause disturbance to other electric appliances insofar as they also
meet the requirements of the same regulaons. Your inducon hob emits magnec elds in its immediate
surroundings.
To avoid the possibility of interference between your cooking hob and a heart pacemaker, the laer must
be designed to comply with the regulaons that apply to it.
In this respect, we can therefore only guarantee the compliance of our own appliance. With regardto the
compliance of a heart pacemaker or any eventual incompability, we recommend that you consult its
manufacturer or your doctor.
If this appliance is to be placed in close proximity to
a wall, paron, kitchen unit, decorave trim, etc.,
it is recommended that the appliance be made of
non-combusble material; if this is not the case,
they must be covered with a suitable material,
thermal insulaon and non-combusble, with par-
cular aenon being paid to re prevenon regula-
ons.
14
ontrols :
Timer mode
ON / OFF
Seng (-)
Power / temperature / mer
Power or temperature mode
Seng (+)
Power / temperature / mer
MAX (power, temperature, mer)
15
When an inducon-compable saucepan is placed on the replace, the display shows the waage or the tempe-
rature in ° C. The temperature seng is 30 to 250 °C in increments of 5 °C.
Power seng:
IND-25/DH : from 25 to 1000W with 50W steps and from 1000 to 2500W with 100 W steps.
IND-30/DH : from 25 to 1000W with 50W steps and from 1000 to 3000W with 100 W steps.
IND-35/DH : from 25 to 1000W with 50W steps and from 1000 to 3500W with 100 W steps.
16
place the pan on the cooking
zone with a power level set :
your pan is , if it your pan
.
You can also test with the aid of a magnet: if it
“scks” to the base of the pan, then the pan is
compable with inducon technology.
-
• with or without a nonsck
coang.
• -designed for inducon.
Most stainless steel pans are suitable if they pass
the pan test.
• - with or without an enamelled
base.
• .
• NOTE
Pans made from glass, ceramic material, clay,
aluminium (without special pan base), and
copper, as well as certain non-magnec stainless
steels are not compable with inducon cooking.
The indicator for the power level selected will
ash to inform you of this.
Containers made of plasc must
not be placed on hot surfaces
when handling the pans.
The glass surface is very strong, however it is not
unbreakable.
the pans over the surface of the
appliance.
your pan on the inducon cooking zone.
on the inducon
zone.
-foodstus on the
if you are using a pan with an an-sck
coang (of the teon type) without or with a ny
a mount of cooking fat or oil.
as it might
burst.
, lids,
knives or any other metal objects on the
induconcooking zone. These objects are
liable to heat up if they remain too close to
the magnec eld generated by the induc-
on cooking zone.
17
/Before any intervenon to disassemble the lter, it is ESSENTIAL to
Clean approximately every week with soapy water the lter placed under your device (or put it in the
dishwasher). Put it back very dry before any use. This lter protects your device from dust and fats.
Slight Dilute well the zone to clean with hot water
then wipe. Sanitary sponges
Accumulaon of recooked
spots
Dilute well the zone to clean with hot water, use a special
scraper for glass to rough-hew, nish with the scraper side of
a sanitary sponge, then wipe.
Sanitary sponges
special scraper for glass
Haloes and tracks of limestone Apply some hot spirit vinegar to the spot, let act, wipe with a
so cloth. Use a domesc product.
Special vitroceramic
glass dough
Inlays following the over-
owing of sugar, aluminium or
molten plasc
Apply to the surface a special product for vitroceramic glass,
rather containing some solicone (protecve eect).
Special vitroceramic
glass product
18
...... this does not necessarily mean that a fault has
occurred.
ER.01 : In vitro sensor in short circuit slave home ==> Call Aer sales service.
ER.02 : In vitro sensor cut o or absent slave home ==> Call Aer sales service.
ER.03 : Sensor in vitro short-circuit master focus ==> Call Aer sales service.
ER.04 : In vitro sensor cut o or absent master replace :Call Aer sales service.
ER.05 : IGBT sensor shorted ==> Call Aer sales service.
ER.05 : Sensor temperature generator card cut or missing ==> Call Aer sales service.
ER.06 : IGBT temperature sensor switched o or missing ==> Call Aer sales service.
ER.06 : Sensor temperature generator in short circuit ==> Call Aer sales service.
ER.07 : Temperature on IGBT too high ==> Press on / o key to acknowledge fault, or disconnect / reconnect product.
ER.08 : The temperature of the in vitro sensor does not vary ==> Press the on / o key to acknowledge the fault or disconnect /
reconnect product. If error code sll present: Call Aer sales service.
ER.13 : One or more fans missing or defecve ==> Press the on / o key to acknowledge the fault or disconnect / reconnect
product.If error code sll present: Call Aer sales service.
ER.14 : One or more fans missing or defecve ==> Press the on / o key to acknowledge the fault or disconnect / reconnect
product. If error code sll present: Call Aer sales service.
ER.15 : Measuring fault of the inducve current ==> Press the on / o key to acknowledge the fault or disconnect / reconnect
product. If error code sll present: Call Aer sales service.
ER.16 : Failure to measure the phase of the inducve current ==> Press the on / o key to acknowledge the fault or discon-
nect / reconnect product. If error code sll present: Call Aer sales service.
ER.18 : Internal 13.8-volt generator voltage fault ==> Press the on / o key to acknowledge the fault or disconnect / reconnect
product. If error code sll present: Call Aer sales service.
ER.29 : Analogue safety fault ==> Press the on / o key to acknowledge the fault or disconnect / reconnect product. If error
code sll present: Call Aer sales service.
ER.31 : Slave generator communicaon fault ==> Press the on / o key to acknowledge the fault or disconnect / reconnect pro-
duct. If error code sll present: Call Aer sales service.
ER.09 : Mains voltage below 85 Vac ==> Press the on / o key to acknowledge the fault or disconnect / reconnect product. If
error code sll present: Call Aer sales service.
ER.20 : Mains frequency below 285 Hz ==> Press the on / o key to acknowledge the fault or disconnect / reconnect product. If
error code sll present: Call Aer sales service.
ER.10 : Line voltage greater than 285 Vac ==> Press the on / o key to acknowledge the fault or disconnect / reconnect product.
If error code sll present: Call Aer sales service.
ER.19 : Mains frequency greater than 70 Hz ==> Press the on / o key produced to acknowledge the fault or disconnect / recon-
nect product. If error code sll present: Call Aer sales service.
19
Keep the proof of purchase to use the guarantee service of your product.
Any modicaon such as drilling, welding, criimping, clinching, etc., is not permied and is not covered by
the manufacturer’s warrenty.
Any wrong modicaon or installaon, which does not respect standards, is not covered by the
manufacturer’s warranty and will be permanently suspended.
The guarantee is subject to the non-modicaon of the product and its mechanical and electrical
specicaons. Opening the product cancels any form of warranty.
Any defects in appearance caused by the use of abrasive products or fricon of cookware on the ceramic
glass hob that does not result in a non-funconing or inability to use the appliance is not covered in the
guarantee. The vitroceramic glass and the casing are not subject to warranty.
ANY REPAIRS MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN
Only the distributors of our brand:
- KNOW YOUR APPLIANCE PERFECTLY AND HOW IT WORKS.
- FULLY APPLY OUR METHODS OF ADJUSTEMENT, MAINTENANCE AND REPAIRS.
- USE ONLY ORIGINAL SPARE PARTS.
In case of a claim or if you wish to order spare parts from your distributor, please specify the full
reference numbers of your appliance (appliance type and serial number). This informaon appears on the
plate xed under the metal casing of the appliance.
The descripons and characteriscs given in this booklet are for informaon purposes only and do not
imply commitment from the manufacturer. Concerned about the quality of our products, we reserve the
right to carry out necessary changes or improvements without prior noce.
Original spare parts: ask your retailer for cered original spare parts during a maintenance operaon.
This manual suits for next models
3
Other Diamond Hob manuals
Popular Hob manuals by other brands
Indesit
Indesit VIA 630 C operating instructions
Nordmende
Nordmende HCT78FL Operating and installation instructions
BALAY
BALAY 3ETG391BP installation instructions
AEG
AEG 76301KF-N Installation and operating instructions
Hotpoint
Hotpoint TEPPAN YAKI UK operating instructions
Smeg
Smeg PS9R-3 instruction manual
