Diamond ICE280MAS-R2 User manual

Mod: ICE280MAS-R2
Production code: G280A HC
08/2018

E
EN N
Directive:
2014/35/EU
Low Voltage Directive
2006/42/CE
Machinery Directive
2014/30/EU
Electro agnetic Co patibility Direct
ive
2011/65/UE Restriction of the use of certain hazardous substances in electrical and electronic
equip ent
Standard:
EN 60335
-
1
Household and si ilar electrical appliances
-
Safety
-
Part 1: General require ents
EN 60335-2-75 Household and si ilar electrical appliances - Safety - Part 2-75: Particular
require ents for co ercial dispensing appliances and vending achines
EN 62233 Measure ent ethods for electro agnetic fields of household appliances and
si ilar apparatus with regard to hu an expos
ure
EN 12100 Safety of achinery - Basic concepts, general principles for design - Part 1: Basic
ter inology, ethodology
EN 55014-1 Electro agnetic co patibility: require ents for household appliances, electric tools
and si ilar apparatus. E ission
EN 55014-2 Electro agnetic co patibility: require ents for household appliances, electric tools
and si ilar apparatus. I unity
–
product fa ily standard
EN 61000-3-2 Electro agnetic co patibility. Li its. Li its for har onic current e issions
(equip ent wit
h input current up to and including 16A per phase)
EN 61000-3-3 Electro agnetic co patibility. Li its. Li itation of voltage changes, voltage
fluctuations and flicker in public low-voltage supply
syste s, for equip ent with rated current ≤ 16A per phase and not subjected to
conditional connection
EN 50581 Technical docu entation for the assess ent of electrical and electronic products
with respect to the restriction of hazardous substances
Regulations and technical specifications:
D.M. 21/3/73 Regulations covering hygiene of packaging, recipients, tools and equip ent,
designed to co e into contact with foodstuffs and substances for personal use
CE 1935/2004
Materials and articles intended to co e into contact with food
CE 2023/2006 Good anufacturing practice for aterials and articles intended to co e into contact
with food
Original copy and infor ation folder available at Legal Representative of the Manufacturer / Authorized Representative
EC DECLARATION OF CONFORMITY
The above- entioned apparatus is designed for the production of ice. We the undersigned declare under our own
exclusive responsibility that the ice aker referred to in this declaration is in full co pliance with the require ents of the
following European Directives, standard, regulations, technical specifications and subsequent odifications.

Dear Custo er, Congratulations on having chosen a top-quality product, which is sure to live up to your expectations.
Please read this instruction manual carefully before usin your new odular auto atic granular ice flaker.
TABLE OF CONTENTS
1 IMPORTANT ADVICE AND RECOMMENDATIONS
2 TECHNICAL SPECIFICATIONS
3 ADVICE ABOUT TRANSPORTATION
4 UNPACKING
5 INSTALLATION
5.1 CONNECTION DIAGRAM
5.2 POSITIONING
5.3 CONNECTION TO WATER MAINS
5.3.a WATER SUPPLY
5.3.b DRAIN
5.4 CONNECTION TO THE ELECTRICITY MAINS
6 START-UP
6.1 CLEANING INTERNAL PARTS
6.2 START-UP
6.3 CLEANING THE STEEL PARTS
7 MAIN CAUSES OF OPERATING FAILURE
8 OPERATION
9 MAINTENANCE
9.1 CLEANING THE FILTER OF WATER SUPPLY SOLENOID VALVE
9.2 AIR-COOLED MODELS
9.3 CLEANING AND SANITIZING OPERATIONS
10 CLEANING
11 SANITIZING
12 PERIODS AT A STANDSTILL
The figures in this manual are of a general nature. Some details may therefore differ depending on the specific model.
The Manufacturer declines all liability for any inaccuracies in this instruction manual due to printing or transcription errors. The
Manufacturer also reserves the right to make any modifications to the products that may be necessary or useful, also in the interests of the
user, without impairing the products’ essential features of functionality and safety.

E
EN N
1 IMPORTANT ADVICE AND RECOMMENDATIONS
Symbol ISO 3864-B.3.2 CAUTION: Fire hazard
Before installin and usin the appliance, read the advice and
recommendations contained in this instruction manual very
carefully. They are iven in order to ensure safe installation, use
and maintenance of the appliance.
Before to start, ake sure that the appliance is intact. If in doubt, do
not use it and contact the authorized technical assistance center.
The ice aker can only be put into operation if the installation has
been carried out in co pliance with local laws and regulations and
according to the instructions in this anual.
This appliance contains R290 refrigerant, a natural gas that is not
har ful to the environ ent but is fla able.
R290 refrigerant is a colourless, odourless gas, and as such its
presence cannot be identified by the senses. This condition requires
special safety easures.
Installation, aintenance, repairs and any other intervention on the
ice aker ust only be perfor ed by trained staff who are qualified
in line with national laws to work with fla able gases. Works
perfor ed by unqualified staff ay result in serious hazards.
Install the ice aker:

•in places with a ini u volu e of 1 3 for every 8 gra s of
R290; the quantity is indicated on the data plate affixed to the
appliance
•in places with flat, intact flooring, with no channels or grilles or other
connections to the floors below, where in the event of leakage the
gas could accu ulate (R290 refrigerant is heavier than air and
tends to accu ulate downwards)
•away fro electrical switches, live fla es, hot surfaces and other
sources of co bustion or ignition
Before starting the appliance CHECK IT IS IN GOOD CONDITION.
IF YOU ARE IN ANY DOUBT DO NOT USE IT.
The ice aker can be operated only if it has been installed in
co pliance with local laws and regulations and following the
instructions given in this anual.
It is strictly forbidden to access the refrigerator circuit of the
appliance, call an authorised servicer in case of need.
In the event of da age to the refrigeration circuit: switch off the
achine i ediately, disconnect it fro the power supply, ventilate
the roo and call the Authorized Technical Service Centre.
It is absolutely forbidden for the user to access the appliance's
cooling circuit, in case of necessity, call the authorized assistance.
WARNING: Do not use echanical devices such as
screwdrivers, sharp tools or other eans to speed up the defrosting
process.

E
EN N
WARNING: Keep the vents in the appliance casing or flush-
ounting fra e clear fro obstructions.
WARNING: Do not da age the refrigerant circuit.
WARNING: Do not use electrical apparatus in the ice
co part ents
WARNING: Do not keep explosive substances in the apparatus
co part ent, such as aerosol spray cans with fla able propellant
In the event of da age to the refrigerant circuit: switch off the
achine i ediately, disconnect it fro the power supply, ventilate
the environ ent, call authorized service.
This instruction manual forms an inte ral part of the automatic
ice-cube maker (also more simply called “appliance” in the text)
and must be kept for possible future consultation.
The user ust keep this docu entation intact to allow it to be
consulted throughout the useful life of the appliance.
Keep this anual safe and ensure that it is available for consultation
near the appliance.
If lost or destroyed ask for another copy fro the distributor,
indicating the serial nu ber and odel of the appliance.
The anual describes the state of the art at the ti e of supply of the
appliance, the distributor reserves the right to odify its appliances
when dee ed useful at any ti e, without having to update this
docu ent or docu ent relating to previous production batches.

The technical staff in charge of the activities perfor ed on the
appliance are responsible for the application of the safety
require ents laid down in this anual, and shall ensure that the
authorised staff:
-are qualified to perfor the required activities
-know and co ply with the instructions laid down in this
docu ent
-know and apply the national safety require ents applicable to
this appliance
Before installin and usin the appliance, read the advice
and recommendations contained in this instruction manual very
carefully. They are iven in order to ensure safe installation, use
and maintenance of the appliance.
•No use fla es and source of ignition and co bustion
•always re ove the plug fro the power socket before proceeding
with any cleaning or aintenance operations
•to ensure the appliance operates efficiently and correctly, it is
essential to co ply with the Manufacturer’s instructions and to
ake sure that aintenance is perfor ed by specially qualified
personnel
•do not re ove any of the panels or grilles
•do not rest objects on the appliance or in front of the ventilation
grilles
•always lift the appliance to ove it, even slightly. Do not push or
pull it
•any use of the appliance other than the ice production using cold
drinking water will be dee ed i proper

E
EN N
•do not obstruct the ventilation and heat-dissipation grilles, since poor
aeration - in addition to reducing efficiency and causing poor
operation - ay also cause serious da age to the appliance
•if the appliance breaks down and/or operates in a faulty way,
switch it off by eans of the ain switch fitted during the
installation phase, re ove the plug fro the socket (if any), and
turn off the water tap(s). Do not ake any atte pt to repair the
appliance yourself. Contact only professionally qualified and
authorized personnel
•in addition to rendering any for of warranty null and void,
odifying (or atte pting to odify) this appliance is extre ely
dangerous
•do not use the ice bin to cool or store food or drinks, because these
operations could obstruct the drainage outlet, causing the bin to fill
up with water and overflow
•in the event of a failure, contact the dealer who sold you the
appliance; he will be able to give you the address of your nearest
Authorized Technical Service Centre. Always insist on having
original spare parts ounted
•any specific infor ation or diagra s regarding particular odels
will be attached to this instruction anual
•are available accessories that allow to switch on and off the
appliance fro re ote location, por that allow to adjust the leve of
stored ice. The liability for da ages to persons, ani als, objects or
to the appliance itself caused by i proper installation, is of those
who perfor ed the installation
Use of this electrical appliance requires co pliance with certain
funda ental rules; in particular:
• do not touch the appliance with wet or da p hands or feet
• do not use the appliance when you are barefoot

• do not use extensions in pre ises such as bathroo s or shower
roo s
• do not tug on the power supply cable to disconnect it fro the ains
• this appliance can be used by children aged fro 8 years and
above and persons with reduced physical, sensory or ental
capabilities or lack of experience and knowledge, if they have been
given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user aintenance shall not be
ade by children without supervision
• supervise children to ensure that they do not play with the appliance
Should you decide to scrap appliance, first disconnect the power
cable fro the ains, and then cut the cable off.
In addition, proceed as follows:
• do not allow the coolant gas and oil in the co pressor to disperse
into the environ ent
• dispose of or recover the various aterials according to the
provisions established by the current laws in force in your Country
This sy bol eans that this product should not be treated as a household waste. To prevent potential negative
consequences for the environ ent and health, be sure this product is correctly disposed of and recycled.
For infor ation on the disposal and recycling of this product, contact your Distributor or the Waste Treat ent Service.
This appliance does not contain coolant that dama es the ozone layer. It contains fluorinated reenhouse ases covered
by the Kyoto Protocol. This product is hermetically sealed.
The Manufacturer shall not be liable for any dama e to the environment, animals, persons or objects caused by
incorrect installation.
2 TECHNICAL DATA (Fi . 1)
The voltage and frequency are given on the data plate on the appliance. Refer to this data plate to check co pliance.
Voltage (1), power (2), odel (3), serial No. (4), Manufacturer (5).
The weighted equivalent continuous sound level A of this appliance is less than 70 dB(A). The easure ents were taken 1 etre
fro the surface of the appliance and 1.60 etres above ground, during ice production.
The wiring diagra is stuck inside front panel or on the rear panel of the appliance.
3 ADVICE ABOUT TRANSPORTATION
The net weight and the weight including packaging of the appliance are given on the cover of this instruction anual. Please refer
to the instructions on the packaging in order to correctly transport and lift the appliance.
To prevent the oil in the co pressor fro flowing back into the coolant circuit, always ake sure that the appliance is kept upright
during transport, storage, and handling. Follow the instructions given on the packaging.

E
EN N
4 UNPACKING
The appliance must be installed by authorized personnel, in compliance with the current laws in force and the
Manufacturer’s instructions.
Once you have re oved the packaging according to the instructions on the box, MAKE SURE THAT THE APPLIANCE IS IN A
PERFECTLY GOOD CONDITION. IF IN DOUBT, DO NOT USE IT AND IMMEDIATELY CONTACT THE DEALER who sold it to
you.
All the packa in items (plastic ba s, cardboard, polystyrene foam, nails, etc.) must be removed and put out of the reach
of children, as they are potential sources of dan er.
With the pallet resting co pletely on the ground, lift the appliance with lifting gear suited to its weight and separate it fro the
wooden pallet.
NOTE FOR INSTALLER:
This operation must only be performed by professionally qualified and authorized personnel.
The appliances contain threaded holes for hooking eyebolts (Fig. 2). To prevent da age to the appliance, the lifting bolts should
be kept vertical during lifting.
5 INSTALLATION
5.1 CONNECTION DIAGRAM (Fi . 3)
6. electrical connection controlled by o nipolar circuit-breaker with residual current device
7. water tap(s)
8. water supply pipe for ice aking
9. water supply pipe for water cooling (W)
10. water drainage pipe
11. cooling water drainage pipe (W)
5.2 POSITIONING
The appliance must be installed in a hy ienically clean location; it is advisable to avoid rooms like cellars and store-
rooms, because failure to meet hy iene requirements is likely to lead to the formation and proliferation of bacteria in the
appliance.
The appliance can operate at an ambient temperature of between 10°C and 43°C. The best performance will be obtained
by installin the appliance in a place with an ambient temperature of between 10°C and 35°C and a water temperature of
between 3°C and 25°C.
Avoid direct exposure to sunli ht and do not install near heat sources.
This appliance:
• must be installed in a place where it can be supervised by skilled personnel
• ust not be used outdoors
• ust not be installed in da p places or where it is liable to be sprayed with water
• ust not be cleaned with jets of water
• ust be allowed a clearance of least 20 c all around
The connection of the appliance with the accessories must be carried out by professionally skilled and qualified
personnel.
The accessories are supplied with instructions showing the correct connection to the appliance
The liability for dama es to persons, animals, objects or to the appliance itself caused by improper installation of the
accessories, is exclusively of those who performed the installation.
The manufacturer declines all liability for installation of accessories supplied by other manufacturers.
The appliance must be installed on a bin.
For correct installation on our bins, see the diagra s supplied with the bins.
In any event the instructions and advice contained in this anual ust be co plied with, especially those relating to connection to
the electricity and water supply.
Use a spirit level to ensure that the appliance is standing perfectly level. If necessary, adjust the legs fitted to our bins.
The manufacturer declines all liability for installation on bins made by other manufacturers.
5.3 CONNECTION TO THE WATER MAINS

IMPORTANT:
•the appliance ust be connected to the water ains by professionally qualified personnel in accordance with the
Manufacturer’s instructions
•this appliance ust be only be supplied with cold water for hu an consu ption (drinking water)
•the operating pressure ust be between 0.1 and 0.6 MPa
•a tap ust be installed between the water ains and each feed pipe of the appliance, so that the water supply ay be shut off
if necessary
•where the feed water is particularly hard, you are advised to install a polyvalent cartridge filter. Any solid particles (e.g. sand)
ay be eli inated by installing a echanical filter, which ust be periodically inspected and cleaned. These devices ust
co ply with the standards in force in the Country of use
•never turn the water supply tap(s) off when the appliance is working
•only new hose-sets supplied with the appliance are to be used to connect the appliance to water ains, old hose-sets should
not be reused
•Is forbidden install the machine to De-ionized or Reverse Osmosis Water
5.3.a FILLING WITH WATER (Fi . 4)
Insert the special seals provided (13) in the two threaded ring nuts (12) of the water supply pipe (8) supplied with the appliance.
Without exerting excessive force (otherwise the unions could crack), fir ly tighten one of the threaded ring nuts on the outlet of
the solenoid valve located in the rear of the appliance. The other threaded ring nut ust be screwed to the water tap (7); this
too ust be provided with a thread.
For water-cooled odels, connect union (15) to a tap (7) with a water supply pipe (9).
5.3.b DRAIN (Fi . 4)
Fix the water drain pipe (10) in the housing provided on the rear of the appliance. Make sure that:
• the pipe is a hose
• the internal dia eter is 22 , as required
• the water drain hose is not throttled at any point throughout its length
• the drain hose slopes downwards by at least 15%
For water-cooled odels connect union (16) to a drain with a water drainage pipe (11).
It is advisable to drain the water straight into an open drain trap.
5.4 CONNECTION TO THE ELECTRICITY MAINS
IMPORTANT:
•the appliance ust be connected to the electricity ains by professionally qualified personnel in accordance with the
Manufacturer’s instructions
•before connecting the appliance to the electricity ains, ake sure that the ains voltage rating corresponds to the value
indicated on the rating plate
•ake sure that the appliance is connected to an efficient earthing syste
•ake sure that the capacity of the power supply syste suits the axi u power value indicated on the rating plate of the
appliance
•if the appliance co es supplied with a plug, prepare a socket controlled by an o nipolar circuit-breaker (6 in Fig .3), with a
contact-opening gap of not less than 3 , that provides full disconnection under overvoltage category III conditions, in
accordance with national safety standards currently in force. This switch ust be equipped with fuses, with the associated
residual current device positioned in such a way as to be readily accessible. Insert the plug into the socket controlled by the
switch
•the plug ust only be replaced by professionally qualified and authorized personnel, and the new plug ust co ply with
current national safety standards
•if the appliance co es supplied without a plug and you wish to connect it per anently to the power supply, prepare an
o nipolar circuit-breaker, with a contact-opening gap of not less than 3 , that provides full disconnection under overvoltage
category III conditions, in accordance with national safety standards currently in force. This switch ust be equipped with
fuses, with the associated residual current device positioned in such a way as to be readily accessible. This operation must
be carried out by a specialized technician
•ake sure that you fully uncoil the power supply cable and check that it is not crushed in any way
•should the supply cable be da aged, it ust be replaced by a specialized technician using a special cable available fro the
Manufacturer or fro the Technical Service Centres
6 START-UP
6.1 CLEANING INTERNAL PARTS

E
EN N
The appliance will have already been cleaned in the factory. However, you are advised to wash the internal parts again before
using the appliance. Make sure that the power supply cable is unplugged before carrying out the above cleaning operation.
See cleanin and sanitizin manual for information re ardin cleanin operations.
Use ordinary washing-up liquid or a water and vinegar solution for cleaning operations; after cleaning, rinse thoroughly with cold
water and discard the ice produced during the first 30 inutes after cleaning, together with any ice present in the bin.
It is advisable to avoid using abrasive detergents or powders, since these ight da age the finish.
6.2 START-UP
Once the appliance has been correctly connected to the electricity ains, water ains and water drain syste , it can be started
up as follows:
a) turn on the water supply tap(s) (7 in Fig. 3)
b) insert the plug (if any) in the socket and switch on the power supply by eans of the relative switch fitted during the installation
phase (6 in Fig. 3)
For appliances that are connected per anently to the electricity ains, turn on by eans of the switch on the outside of the
appliance, fitted during the installation phase.
Switch on appliance by pressing the lu inous switch (18 in Fig. 2).
The appliance will begin to produce ice 10 inutes after start-up. Every ti e the appliance is started up, the rotation sensor
will perfor a preli inary check on its operation during this period.
6.3 CLEANING THE STEEL PARTS
The appliance was cleaned initially in the factory. For subsequent cleaning operations on the steel parts of the achine, co ply with the
instructions below:
Do not allow saline solutions to dry or pool on the external steel co ponents of the achine, as this ay lead to corrosion.
Avoid contact with ferrous aterial (scourers, forks, ladles, scrapers, etc.) to prevent corrosion, conta ination fro ferrous particles
circulating in the receptacle.
Carefully clean the stainless steel parts with a da p cloth, water and soap or co on, non-abrasive chlorine or a onia based
detergents.
7 MAIN CAUSES OF OPERATING FAILURE
Should the appliance fail to produce ice, before calling on the Authorized Technical Service Centre, first check carefully that:
• the water supply tap(s) (7 in Fig. 3), fitted during the installation phase, has/have been turned on
• check that there is no power cut, the plug (if any) is correctly inserted in the socket, the switch (6 in Fig. 3) is in the “ON” position,
and the pushbutton (18 in Fig 2) is illu inated
• check that the rotation sensor is not signalling an alar
Further ore:
• if there is excessive noise, ake sure that the appliance is not touching furniture or sheet etal which can give rise to noise or
vibrations
• should any trace of water appear, check the drain hole of the bin to ensure that it is not clogged, that the water fill and drain
pipes are correctly connected and are not throttled or da aged
• ake sure that the te perature of the air or water does not exceed the installation li it values (see paragraph 5.2)
• ake sure that the water inlet filter is not clogged (see paragraph 9.1)
If the fault still persists after the above inspections have been ade, turn off the electric power source by eans of the switch
fitted during the installation phase, pull out the plug (if any) fro its socket, turn off the tap(s) connecting the appliance to the water
ains, and contact the nearest Authorized Technical Service Centre.
To obtain a faster and ore efficient reply when you call the Centre, state the odel of the appliance precisely, together with its
serial nu ber or anufacturing nu ber. This infor ation is given on the serial N° plate (Fig. 1) affixed to the rear of the appliance
and on the cover of this instruction anual.
8 OPERATION
The appliance has a ther ostat which stops ice production when the ice accu ulated in the bin reaches the probe connected to
the ther ostat. When ice is taken fro the bin, the ther ostat will auto atically reactivate ice-cube production, thus creating a
new supply of ice.
The appliance is equipped with a rotation sensor which guarantees its correct operation; when the appliance is switched on, it is
necessary to wait for 10 inutes while the rotation sensor perfor s a preli inary check on its correct operation.
NOTE FOR MODELS WITH PRODUCTION OF 280 kg/24h, 510 kg/24h and 1000 kg/24h:
The key to the rotation sensor’s error signals is affixed to the appliance.

The appliance is equipped with a safety pressure switch that stops production in the event of a alfunction of the cooling circuit; to
restart the appliance, fir ly press the reset button (if any). If the fault still persists, turn off the electric power source by eans of
the switch (6 in Fig. 3) fitted during the installation phase, pull out the plug (if any) fro its socket, turn off the water supply tap(s)
(7 in Fig. 3), and contact the nearest Authorized Technical Service Centre.
9 MAINTENANCE F
9.1 CLEANING THE FILTER OF WATER SUPPLY SOLENOID VALVE (Fi . 5)
All the operations described in this para raph must be carried out only after the electric power and water supplies have
been disconnected, as described previously, by professionally qualified and authorized personnel.
At least every two onths, clean the filter (17) located on the water inlet solenoid valve, proceeding as follows:
• switch off the electric power supply by eans of the switch (6 in Fig. 3), fitted during installation, and disconnect the plug of
the appliance fro its socket (if any)
• shut off the water supply by turning the tap (7 in Fig. 3) fitted during installation
• unscrew the threaded ring nut (12 in Fig. 4) of the water feed hose, located at the outlet of the solenoid valve at the rear of the
appliance
• using a pair of pliers, re ove the filter (17) fro its seat without da aging the water feed pipe connector
• place the filter under a strong jet of water to re ove residue, but replace the filter if it is excessively dirty
After having carried out the cleaning operations, refit the filter and hose pipe, taking the necessary precautions described earlier in
this instruction anual.
When the operations have terminated, turn on both the electricity supply and water supply.
9.2 AIR-COOLED MODELS (Fi . 6)
For air-cooled odels, it is very i portant to keep the finned condenser and its external filter (if any) clean.
Have the finned condenser cleaned at least once every two onths by an Authorized Technical Service Centre, which can include
this operation in the scheduled aintenance progra e.
The external filter ust be cleaned at least once a onth, as follows:
• switch off appliance and cut off power supply with the switch (6 in Fig. 3) fitted at the installation stage
• re ove filter and keep it at a distance fro the appliance
• re ove dust fro filter by blowing with co pressed air
• replace filter in its seat
9.3 CLEANING AND SANITIZING OPERATIONS
A cleanin and sanitizin kit specifically desi ned for this appliance is available from your dealer.
Do not use corrosive substances to remove limescale from the appliance, because this will invalidate the warranty,
and may cause serious dama e to the materials and components of the appliance.
Do not use jets of water to clean the appliance.
All cleanin operations must be carried out only after the electric power and water supplies have been disconnected,
as described previously, by professionally qualified and authorized personnel.
Follow the instructions iven in the cleanin and sanitizin manual supplied with the appliance.
IMPORTANT:
• all the ice produced durin the first 30 minutes after cleanin and sanitizin operations, to ether with any ice present in
the bin, must be discarded
• when the appliance is cleaned and sanitized, its bin must also be cleaned and sanitized
Co plete sanitizing can only be carried out only by the Authorized Technical Service Centres, and ust be done regularly
depending on the conditions of use of the appliance, the che ical and physical features of the water, and after every period in
which the appliance has re ained at a standstill for any length of ti e.
You are advised to ask your dealer to draw up a scheduled aintenance contract that will cover the following:
• cleaning the condenser
• cleaning the filter located on the water supply solenoid valve
• cleaning and sanitizing the ice-tray
• checking the charge of coolant gas
• checking the operating cycle
• cleaning and sanitizing the appliance
The frequency of cleaning and sanitizing operations can vary, depending on:

E
EN N
• te perature and environ ental conditions
• te perature and quality of water (hardness, presence of grit, etc.)
• quantity of ice produced, or ti e of use of ice flaker
• periods of non-use of ice flaker
TO ENSURECORRECT CLEANING AND SANITIZING OF THE APPLIANCE, PERFORM THE OPERATIONS DESCRIBED IN
THIS MANUAL AT LEAST ONCE A MONTH.
IMPORTANT:
• the operations described in this anual ust only be perfor ed by skilled, authorized personnel
• the ice flaker ust be installed in a hygienically clean location; avoid pre ises such as cellars and storeroo s, because poor
hygiene pro otes for ation and proliferation of bacteria in the ice flaker
• a cleaning and sanitizing kit specifically designed for this appliance is available fro your dealer
• do not use corrosive substances to re ove li escale fro the appliance, because this will invalidate the guarantee, and ay
cause serious da age to the aterials and co ponents of the appliance
• gloves suitable to protect against cuts ust be worn when perfor ing all operations involving handling of sheet etal parts in
particular
• gloves suitable to protect the skin against the substances used ust be worn when perfor ing all cleaning and sanitizing
operations
• wear suitable goggles during cleaning and sanitizing operations to protect the eyes against splashes of the substances used
• take care not to spill water or solutions on the internal co ponents of the appliance, the wiring or the power cable
10 CLEANING
1. switch off appliance and disconnect from power supply mains
2. close ice- aking water supply tap (1 in Fig. 7), leaving the cooling water supply tap (if any) open (2 in Fig. 7)
3. prepare approxi ately 8 litres (2 gallons) of 25%-solution of water and white vinegar to be used to clean the appliance
4. re ove top panel of appliance by loosening fixing screws (Fig. 8)
5. re ove lid of water supply basin (Fig. 9)
6. connect appliance to power supply ains, and switch on by pressing lu inous switch
(3 in Fig. 4), re oving front panel if necessary
7. pour the water and vinegar solution into the basin, taking care to keep the basin full
IMPORTANT:
An excessively low level in the basin causes the rotation sensor to operate and shut down the appliance. To restart the appliance,
top up the basin and wait for 10 inutes, to allow ti e for the rotation sensor to enable its operation.
8. leave appliance running, topping up the level of solution in the basin until at least 4 litres
(1 gallon) of solution have been used
9. open ice- aking water supply tap (1 in Fig. 7) and leave appliance to operate for at least 5 inutes, without adding any
solution to the basin
10. discard all ice produced durin cleanin operations
11. prepare to perfor the sanitizing operations described in the next chapter
11 SANITIZING
Use a solution in co pliance with 40 C.F.R. 180.940, or a 200 g/l solution of sodiu hypochlorite and water (or a solution of ½
ounce of nor al bleach to 1 gallon of water), or one of the solutions co only used to disinfect babies’ feeding bottles; in this
case, check that the sanitizing product is:
• authorized by your Country’s Ministry of Health
• suitable for use with food- aking achinery
• not har ful to the aterials and co ponents of this appliance
For the directions for use and concentrations, please refer to those shown on the packaging and reco ended by the anufacturer.
We reco end using the solution at the te perature of 25°C.
WARNING:
Before connectin the appliance to the power supply mains, ensure that all cables and wirin of the appliance are
perfectly dry.
1. prepare approxi ately 8 litres (2 gallons) of sanitizing solution to be used to sanitize the appliance

2. switch off appliance, disconnect from power supply mains and close ice- aking water supply tap (1 in Fig. 7), leaving
cooling water tap (if any) open (2 in Fig 7)
3. pour solution into basin, taking care to keep basin full
IMPORTANT:
An excessively low level in the basin causes operation of the rotation sensor, which shuts down the appliance. To restart
apparatus, top up basin and wait for 10 inutes, to allow ti e for the rotation sensor to enable the operation
4. connect appliance to power supply ains, and switch on by pressing lu inous switch
(3 in Fig. 10)
5. leave appliance running, topping up the level of the solution in the basin until at least 4 litres
(1 gallon) of solution have been used
6. open the ice- aking water supply tap (1 in Fig. 7) and leave the appliance to operate for at least 5 inutes, without adding
any solution to the basin
7. switch off appliance and disconnect from power supply mains
8. disconnect the icro-switch(es) fro the ice aker wiring (Fig. 11) and extract the ther ostat probe (4 in Fig. 11) fro its seat
in the ice chute, takin care not to dama e it
9. re ove icro-switch(es) fro its/their seat(s), turning it/the counter-clockwise (Fig. 12)
10. re ove the insulating cap (if any) fro ice exhaust (Fig. 13)
11. re ove (if any) the dual lock strip(s) (5 in Fig. 14) that secures the ice exhaust(s) (6 in Fig. 14) and evaporator(s)
12. re ove ice exhaust(s) (6 in Fig. 14) and extract ice chute(s) (7 in Fig. 14) fro its/their hole(s) in base plate
13. clean with co on washing-up liquid the lid of water basin, the ice exhaust(s) (6 in Fig. 14) and the internal part of ice
chute(s), takin care not to dama e the mechanism(s) inside ice exhaust(s) that operates micro-switch(es). Use a
brush with soft bristles and a non-abrasive sponge to re ove any sedi ents
14. clean with the sa e washing-up liquid the ice spout(s) (8 in Fig. 14) and the ice wiper (9 in Fig. 14), using a brush with soft bristles
and a non-abrasive sponge to re ove any sedi ents
15. rinse with plenty of cold water the ice spout(s) (8 in Fig. 14), the ice wiper (9 in Fig. 14), the lid of water basin, the internal part
of ice chute(s) and ice exhaust(s) (6 in Fig. 14)
16. spray sanitizing solution on ice spout(s) (8 in Fig. 14) and on ice wiper (9 in Fig. 14) and let it work for at least 30 inutes
17. wipe the lid of water basin, the ice exhaust(s) (6 in Fig. 14) and the internal part of ice chute(s) with sanitizing solution
18. rinse with plenty of cold water the ice spout(s) (8 in Fig. 14) and ice wiper (9 in Fig. 14)
19. rinse with plenty of cold water and then dry carefully the lid of water basin, ice chute(s)
(7 in Fig. 8) and ice exhaust(s) (6 in Fig. 14)
20. refit the insulating cap (if any) on ice exhaust (Fig. 13)
21. refit icro-switch(es) in its/their seat(s), turning it/the clockwise. Check the mechanism(s) that operates micro-switch
does push on the switch(es), otherwise slightly separate the echanis (s) fro icro-switch(es)
22. refit ice chute(s) (7 in Fig. 14), inserting it in its/their hole(s) in base plate
23. refit ice exhaust(s) (6 in Fig. 14) and, secure to the evaporator(s) with the dual lock strip(s)
(5 in Fig. 14), if any
24. insert the ther ostat probe (4 in Fig. 11) in its seat in ice chute, takin care not to dama e it
25. refit the lid of water basin
26. connect icro-switch(es) to the ice aker wiring (Fig. 11)
27. check that all cables and wirin of the appliance are perfectly dry
28. refit all the panels of the appliance re oved during cleaning and sanitizing operations and secure the with the fixing screws
29. discard all ice produced durin sanitizin operations
The ice flaker can now be reactivated as specified in the instruction book.
IMPORTANT:
All the ice produced durin the first 30 minutes after cleanin and sanitizin operations must be discarded.
When the appliance is cleaned and sanitized, its bin must also be cleaned and sanitized.
12 PERIODS AT A STANDSTILL
If you do not intend to use the appliance for a certain period of ti e, proceed as follows:
• switch off the electric power source by eans of the switch (6 in Fig. 3), and re ove the plug of the appliance fro its socket (if
any)
• shut off the water supply by turning off the water supply tap(s) (7 in Fig. 3)
• carry out all the operations envisaged for scheduled aintenance of the appliance (see chapter 9)
• clean filter of water supply solenoid valve as described in chapter 9.1
• clean filter of air condenser (if any) as described in chapter 9.2

18
2
1
V.
Mod.
1
5
3
M8
M8
N.
W
4
2
18

4
3
9 (W)
9 (W)
8
11 (W)
11 (W)
10
7
7
~ 200 mm
6
16
15
10
13
12
13
7
12
9
(W)
13
13
11
11
7
12
8
11
11
13
12
9
12
(W)
13

6
17
5

8
(W)
7

9
3
3
10