Digital Dowsing Xcam SLS User manual

All of the data is gathered and displayed in real time. e connected PC based tablet gathers all the
data into one central program for simple viewing and recording. One single screen shows all your
data: Temperature, Imaging, Audio Range, Distance, Light Levels and Visualized Object Scanning.
FOR MORE INFORMATION AND DETAILED USAGE- Please follow our Xcam SLS page
(www.digitaldowsing.com). ere you can take full advantage of new features and news about the
Xcam SLS.
For best results, use the Xcam SLS tablet exclusively for the Xcam SLS system. Installing additional
soware may cause conicts!
If you have questions, know that we strive to answer all emails in 24 hours or less, Monday-Friday.
Best Regards,
Bill Chappell
ank You for your purchase of the new Xcam SLS. We strongly recommend that you go to
http://digitaldowsing.com/product/xcam-sls/ for complete instructions, continued support and up-
dates.
e Xcam SLS is a complex experimental device in paranormal detection. It combines multiple
methods of detection in a single contained device that is both hand held and mountable.
What is Xcam SLS?
SLS stands for ‘Structured Light Sensor.’ SLS is a scanning camera that will capture and understand the
environment. is device is based around an advanced SLS as well as additional sensor inputs.
Copyright 2006-2014 Digital Dowsing LLC.
www.digitaldowsing.com
Xcam SLS
Installing additional programs can cause problems with your Xcam SLS and is not recommended.
We oer a One Year Limited Warranty on parts.
For complete instructions:
http://digitaldowsing.com/product/xcam-sls/
v1.1

Copyright 2006-2014 Digital Dowsing LLC.
www.digitaldowsing.com
Xcam SLS Quick Start Guide
Turning on your Xcam SLS
1. Turn on the tablet.
2. Carefully, attach the Camera Cord to the Micro-
USB Connector on the tablet.
3. From the Start Menu, swipe down and access the
desktop. On the desktop click the Xcam SLS icon
to start the program.
4. e program will to take 15 seconds or so to load.
You will see a black screen until then.
Video Capture - tap once and wait for the countdown
to turn video capture on. Everything within the green
brackets will record even if you open another program
on top. e Video les are stored on the tablet for easy
retrieval.
NOTE: You cannot watch video you have captured while
SLS is running.
Capture Screen -tap to enable/disable screenshots. You
can use the slider to adjust the interval.
Turning o your Xcam SLS
1. Turning o the tablet will turn o the Xcam SLS.
2. Do not put the tablet to sleep. If you put the tab-
let to sleep, the camera will remain on.
3. Wait a few moments to be sure the red light on
the bottom of the unit turns o.
For best results fully charge your Xcam SLS!
Installing the Hand Grip
e handle will screw in clockwise.
For best results, tighten the hand grip with the grip 45
degrees from nal placement. Once the hand grip is
rmly attached, turning the hand grip 45 degrees to the
center. is will rmly connect the hand grip without
breaking the device.
Installing additional programs can cause problems with your Xcam SLS and is not recommended.
We oer a One Year Limited Warranty on parts.
Setting up the Xcam SLS
1. Charge your unit by carefully plugging in
the enclosed charging cable into the Micro-
USB connector.
2. Turn on the tablet.
3. e tablet will require you to activate
Windows, just like any store bought device.
4. Aer your unit is charged, disconnect the
charging cable.
5. Carefully connect the Camera Cable to the
Micro-USB connector on the tablet.
Be Careful! e Mirco-USB is delicate. Be gentle with
your Xcam SLS.
For complete instructions:
http://digitaldowsing.com/product/xcam-sls/
v1.1