DIGITAL-LOGIC MICROSPACE MSMV104+ User manual
-~
ARTISAN
®
~I
TECHNOLOGY
GROUP
Your definitive source
for
quality
pre-owned
equipment.
Artisan Technology
Group
Full-service,
independent
repair
center
with
experienced
engineers
and
technicians
on staff.
We
buy
your
excess,
underutilized,
and
idle
equipment
along
with
credit
for
buybacks
and
trade-ins
.
Custom
engineering
so
your
equipment
works
exactly as
you
specify.
•
Critical
and
expedited
services
•
Leasing
/
Rentals/
Demos
• In
stock/
Ready-to-ship
•
!TAR-certified
secure
asset
solutions
Expert
team
ITrust
guarantee
I
100%
satisfaction
All
tr
ademarks,
br
a
nd
names, a
nd
br
a
nd
s a
pp
earing here
in
are
th
e property of
th
e
ir
r
es
pecti
ve
ow
ner
s.
Find the Microspace / Digital-Logic MSMV104+ at our website: Click HERE
TECHNICAL USER'S MANUAL FOR:
PC/104 PERIPHERAL BOARD
MSMV104+
Nordstrasse 11/F
CH- 4542 Luterbach
Tel.: ++41 (0)32 681 58 00
Fax: ++41 (0)32 681 58 01
Email: [email protected]
Homepage: http://www.digitallogic.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
2
COPYRIGHT Ó1992- 2001 BY DIGITAL-LOGIC AG
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, in any
form or by any means, electronic, mechanical, optical, manual, or otherwise, without the prior written
permission of DIGITAL-LOGIC AG.
The software described herein, together with this document, are furnished under a license agreement and
may be used or copied only in accordance with the terms of that agreement.
Any information in this manual and of the product are subject to change without notice.
REVISION HISTORY:
Prod.-Serialnumber:
From: To:
Product
Version
Document
Version
Date/Vis: Modification:
Remarks, News, Attention:
V1.1 V1.0 07.2001
BEL/STP
Beta Version
V1.2 V1.0a 07.2001 BEL Software location product-CD
Product Registration:
Please register your product at:
http://www.digitallogic.com -> SUPPORT -> mailservice
After registration, you will receive driver & software updates, errata information, customer information and
news from DIGITAL-LOGIC AG products automatically.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
3
Table of Contents
1 PREFACE............................................................................................................................ 5
1.1 HOW TO USE THIS MANUAL ................................................................................................................5
1.2 TRADEMARKS....................................................................................................................................5
1.3 DISCLAIMER ......................................................................................................................................5
1.4 WHO SHOULD USE THIS PRODUCT......................................................................................................5
1.5 RECYCLING INFORMATION..................................................................................................................6
1.6 TECHNICAL SUPPORT ........................................................................................................................6
1.7 LIMITED WARRANTY ..........................................................................................................................6
2 OVERVIEW ......................................................................................................................... 7
2.1 ORDERING INFORMATION...................................................................................................................7
2.2 GENERAL INFORMATION.....................................................................................................................7
2.3 MULTIMEDIA FEATURES .....................................................................................................................9
3 SOFTWARE ........................................................................................................................ 9
4 CONNECTOR AND JUMPER DESCRIPTION .................................................................. 10
4.1 PRODUCT VIEW ...............................................................................................................................10
4.2 CONNECTOR REFERENCES AND TYPES .............................................................................................10
4.3 DUAL LCD CONNECTOR SIGNALS .....................................................................................................11
4.4 LVDS CONNECTOR SIGNALS............................................................................................................12
4.5 ZV-PORT CONNECTOR SIGNALS .......................................................................................................13
4.6 CRT CONNECTOR SIGNALS .............................................................................................................13
4.7 S-VIDEO CONNECTOR SIGNALS ........................................................................................................13
4.8 DVI CONNECTOR SIGNALS ...............................................................................................................14
5 JUMPER DESCRIPTIONS ................................................................................................ 15
5.1 J7: LCD BIAS POWER SELECT. (2-JUMPER) .....................................................................................15
5.2 J6: LCD BACKLIGHT SELECT (3-JUMPER) .........................................................................................15
5.3 J18: DVI I2C OR DESKEWING SELECT (2-JUMPER)...........................................................................15
5.4 J19: DVI DESKEWING INCREMENT SELECT OR I2C ADDRESS ............................................................15
5.5 J23: ZV-PORT ENABLE/DISABLE JUMPER (2-JUMPER) .......................................................................15
5.6 J24: GRAPHIC CONTROLLER VDD SELECT (3-JUMPER) .....................................................................15
5.7 J25: GRAPHIC CONTROLLER MEVDD SELECT (3-JUMPER) ................................................................16
5.8 J26: GRAPHIC CONTROLLER MIVDD SELECT (3-JUMPER) .................................................................16
5.9 J27: GRAPHIC CONTROLLER VCCA SELECT (3-JUMPER) ...................................................................16
5.10 J28: GRAPHIC CONTROLLER RVDD SELECT (3-JUMPER)...................................................................16
5.11 J30: DVI I2C ISEL OR RESET SELECT (3-JUMPER) ........................................................................16
5.12 J22: DISPLAY CONFIGURATION JUMPER............................................................................................16
5.13 DEFAULT SETTINGS .........................................................................................................................16
5.14 DVI CONNECTOR PIN DESCRIPTION ..................................................................................................17
6 DIMENSIONS, CONNECTOR AND JUMPER LOCATIONS ............................................. 18
6.1 TOP VIEW .......................................................................................................................................18
6.2 BOTTOM VIEW .................................................................................................................................19
7 GETTING STARTED ......................................................................................................... 20
7.1 DRIVER INSTALLATION .....................................................................................................................20
7.2 INSTALLING CONTROL PANEL UNDER WINDOWS .................................................................................20
7.3 ACCESSING CHIP FUNCTIONALITY UNDER WINDOWS .........................................................................21
7.4 CONTROL PANEL FUNCTIONALITIES...................................................................................................21
7.4.1 Choosing the display output...................................................................................................22
7.4.2 Setting hotkeys for special display modes .............................................................................22
7.4.3 Entering dual-display mode ...................................................................................................23
8 GRAPHIC MODES ............................................................................................................ 25
8.1 STANDARD IBM COMPATIBLE VGA MODES .......................................................................................25
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
4
8.2 VESA SUPER VGA MODES .............................................................................................................25
8.3 LOW RESOLUTION MODES ................................................................................................................26
8.4 EXTENDED MODES...........................................................................................................................26
9 INDEX................................................................................................................................ 28
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
5
1 PREFACE
This manual is for integrators and programmers of systems based on the MICROSPACE card family. It
contains information on hardware requirements, interconnections, and details of how to program the
system. The specifications given in this manual were correct at the time of printing; advances mean that
some may have changed in the meantime. If errors are found, please notify DIGITAL-LOGIC AG at the
address shown on the title page of this document, and we will correct them as soon as possible.
1.1 How to use this Manual
This manual is written for the original equipment manufacturer (OEM) who plans to build computer
systems based on the single board MICROSPACE-PC. It provides instructions for installing and
configuring the MSM486SL or MSM386SN board, and describes the system and setup requirements.
1.2 Trademarks
Chips & Technologies SuperState R
MICROSPACE, MicroModule DIGITAL-LOGIC AG
DOS Vx.y, Windows Microsoft Inc.
PC-AT, PC-XT IBM
NetWare Novell Corporation
Ethernet Xerox Corporation
DR-DOS, PALMDOS Digital Research Inc. / Novell Inc.
ROM-DOS Datalight Inc.
1.3 Disclaimer
DIGITAL-LOGIC AG makes no representations or warranties with respect to the contents of this manual
and specifically disclaims any implied warranty of merchantability or fitness for any particular purpose.
DIGITAL-LOGIC AG shall under no circumstances be liable for incidental or consequential damages or
related expenses resulting from the use of this product, even if it has been notified of the possibility of
such damage. DIGITAL-LOGIC AG reserves the right to revise this publication from time to time without
obligation to notify any person of such revisions. If errors are found, please contact DIGITAL-LOGIC AG at
the address listed on the title page of this document.
1.4 Who should use this Product
- Electronic engineers with know-how in PC-technology.
- Without electronic know-how we expect you to have questions. This manual assumes, that you have a
general knowledge of PC-electronics.
- Because of the complexity and the variability of PC-technology, we can’t give any warranty that the
product will work in any particular situation or combination. Our technical support will help you to may
find a solution.
- Pay attention to the electrostatic discharges. Use a CMOS protected workplace.
- Power supply OFF when you are working on the board or connecting any cables or devices.
This is a high technology product.
You need know-how in electronics and PC-technology
to install the system !
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
6
1.5 Recycling Information
Hardware:
- Print: epoxy with glass fiber
wires are of tin-plated copper
- Components: ceramics and alloys of gold, silver
check your local electronic recycling
Software:
- no problems: re-use the diskette after formatting
1.6 Technical Support
1. Contact your local Digital-Logic Technical Support in your country.
2. Use Internet Support Request form on http://www.digitallogic.com -> support
3. Send a FAX or an E-mail to DIGITAL-LOGIC AG with a description of your problem.
DIGITAL-LOGIC AG
smartModule DesignIn Center
Nordstr. 11/F
CH-4542 Luterbach (SWITZERLAND)
Fax: ++41 32 681 58 01
E-Mail: support@digitallogic.com
Internet www.digitallogic.com
èSupport requests will only be accepted with detailed informations about the product (BIOS-, Board-
version) !
1.7 Limited Warranty
DIGITAL-LOGIC AG warrants the hardware and software products it manufactures and produces to be
free from defects in materials and workmanship for one year following the date of shipment from
DIGITAL-LOGIC AG, Switzerland. This warranty is limited to the original purchaser of product and is not
transferable.
During the one year warranty period, DIGITAL-LOGIC AG will repair or replace, at its discretion, any
defective product or part at no additional charge, provided that the product is returned, shipping prepaid,
to DIGITAL-LOGIC AG. All replaced parts and products become property of DIGITAL-LOGIC AG.
Before returning any product for repair, customers are required to contact the company.
This limited warranty does not extend to any product which has been damaged as a result of accident,
misuse, abuse (such as use of incorrect input voltages, wrong cabling, wrong polarity, improper or
insufficient ventilation, failure to follow the operating instructions that are provided by DIGITAL-LOGIC AG
or other contingencies beyond the control of DIGITAL-LOGIC AG), wrong connection, wrong information
or as a result of service or modification by anyone other than DIGITAL-LOGIC AG. Neither, if the user has
not enough knowledge of these technologies or has not consulted the product manual or the technical
support of DIGITAL-LOGIC AG and therefore the product has been damaged.
Except, as expressly set forth above, no other warranties are expressed or implied, including, but not
limited to, any implied warranty of merchantability and fitness for a particular purpose, and DIGITAL-
LOGIC AG expressly disclaims all warranties not stated herein. Under no circumstances will DIGITAL-
LOGIC AG be liable to the purchaser or any user for any damage, including any incidental or
consequential damage, expenses, lost profits, lost savings, or other damages arising out of the use or
inability to use the product.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
7
2 OVERVIEW
2.1 Ordering Information
To get the actual status of the partnumbers, customers are advised to ask for
them via our sales department or distributors.
The list below has to be treated as a momentary screenshot and is might not up
to date anymore.
Ordering Information: (To be determined)
MSMV104+l Light version with dual LCD
(no LVDS and DVI)
2.2 General Information
The product MSMV104+ can be described as follows:
- PC/104+ PCI bus 120 pin with selectable PCI slot
- SM721 (Lynx3DM) XGA controller with 4MB VRAM
- 200MHz 24bit RAMDAC for resolution up to 1600x1200
- 1.6GB/s bandwidth
- Combination of 128-bit 2D and 3D Engine (Microsoft DirectX capability)
- Different display outputs CRT, TV-Out, Dual LCD (option LVDS and DVI)
- ZV-Port Interface
BUS:
Standard: PC/104+
Size and Type: PCI multiplexed 32 Bit Address/Data Bus
Controller:
Type: Lynx3DM from SiliconMotion (SM721)
Package: BGA 316 pins
Video Memory:
Size: 4MB VRAM
BIOS:
Standard: CRT only
Available: CRT and TFT 800x600 18 bit
Power Supply:
Power supply: V1.2 5V through PCI Bus
3.3V on board supply
2.5V on board supply
LCD Power supply 3.3 Logic Power
5V/ 3V Bias Power
Power sequencing controlled by SM721
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
8
Interfaces:
DSUB15 VGA CRT
Molex.. DVI (up to 24bit resolution)
Molex… LVDS (up to 18 bit resolution)
40x2 pin Dual LCD (DSTN or TFT)
30 pin ZV-Port
SMB Coax TV-Out (PAL or NTSC)
Available Display:
CRT only
LCD and CRT Simultaneous mode
LCD and CRT Dual display mode (for example extended
Windows desktop)
TV-Out only
LVDS Interface:
Controller DSC90C363 (National)
Size: 18 bit
DVI Interface:
Controller SiL164 (SiliconImage)
Size: 24 bit
Physical Characteristics:
Dimensions: Length: 90mm
Width: 96mm
Height: 15mm
Operating Environment:
Relative humidity: 5 - 90% non condensing
Vibration: 5 to 2000 Hz
Shock: 10g
Temperature: Operating: Standard
version:
-25°C to +70°C
Industry
version:
-25°C to +85°C
(ask DIGITAL-LOGIC AG)
Storage: -55°C to +85°C
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
9
2.3 Multimedia features
The Lynx3DM motion compensation hardware allows full- frame playback of DVD content in software. Making use of
its independent bus-master interface and its ability to alpha blend sub-picture data, the Lynx3DM offloads the CPU
and eliminates the need for a dedicated decoder.
- The MSMV104+ graphic controller integrates a TV encoder with NTSC/PAL support and provide
graphic/video display on TV without the need of any external logic
- The MSMV104+ GPU has a built-in MPEG2 hardware motion compensation decoder so as to enable
easy DVD playback and to offload the main CPU.
- One primary and up to two secondary displays are supported, included dual digital display capability
under Win95, Win98, WinMe, WinNT, WinCE, Win2000 and Linux.
- The MSMV104+ is also fitted with a Zoom Video Port to support input from camera or TV-tuner and
allow easy monitoring, processing and recording of data.
3 SOFTWARE
The software can be found in the MICROSPACE Application CD
CD:\drivers\vga\lynx-3dm_smi721\ Drivers for
dos DOS
lynx3DM-nt4-4.zip Windows NT4.0
lynx3DM-win98-4.zip Windows 95
lynx3DM-winme-4.zip Windows Me
lynx3DM-win2k-4.zip Windows 2000
CD:\products\msm\peripheral
pc104+\msmv104\manual
Manual
Msmv104plus.pdf This file
CD:\ products\msm\peripheral
pc104+\msmv104\tools\
Control panel
CP42a.zip Control panel for SMI721
CD:\ products\msm\peripheral
pc104+\msmv104\tools\
Control panel
CP42a.zip Control panel for SMI721
CD:\ lcd\ vgabios\ lynx-3dm_smi721\ SMI721-
crt.zip
Bios
SMI721-crt.zip “CRT Bios” for SMI721
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
10
4 CONNECTOR AND JUMPER DESCRIPTION
4.1 Product view
The following picture shows a front view from MSMV104+ Version 1.0. The connectors references and
position are the same on revision 1.2.
The connector references are further explained in section 4.2
Figure 5.1a: Interface connectors on MSMV104+
4.2 Connector references and types
Please refer to figure XXX for detailed position of the referenced connectors.
VGA CRT
Type DSUB-15 f
Reference P1
LCD Dual
Type Header 40 (pin to pin compatible with
other 40 pin DLAG LCD product)
Reference X1 and X2
LVDS
Type Molex xxxxxx
Reference J4
N
ative LCD1 X1
N
ative LCD2 X2
LVDS Connector J4
DVI Connector P2
TV-Out SMB J2
VGA CRT P1
ZV-Port J15
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
11
DVI
Type Molex MicroCross Digital/Analogue
Reference P2
TV-Out (CVBS)
Type SMB Coax (75Wf)
Reference J2
TV-Out (S-Video)
Type Header 2
Reference J29
ZV-Port
Type Header 30
Reference J15
4.3 Dual LCD connector signals
The following table provides the pin to pin connection to the the LCD connector X1
X1 Pin Signal X1 Pin Signal
1 M / DE 2 FLM
3 P18 4 Line Pulse LP
5 VCC 6 GND
7 VDDSAVE (5V/1A) 8 Shift Clock
9 VBACKSAVE (12V/1A) 10 P3
11 P2 12 P17
13 P1 14 P16
15 P0 16 P7
17 Enable VEE (TTL) 18 P6
19 VCC Panel (5V/3,3V) 20 P5
21 P4 22 P19
23 P8 24 P9
25 P10 26 P11
27 P12 28 P13
29 P14 30 P15
31 GND 32 NC
33 P20 34 NC
35 P21 36 NC
37 P22 38 NC
39 No connection 40 P23
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
12
The following table provides the pin to pin connection to the LCD connector X2
X2 Pin Signal X2 Pin Signal
1 P15 2 P23
3 P42 4 P22
5 VCC 6 GND
7 VDDSAVE (5V/1A) 8 Shift Clock
9 VBACKSAVE (12V/1A) 10 P27
11 P26 12 P41
13 P25 14 P40
15 P24 16 P31
17 Enable VEE (TTL) 18 P30
19 VCC Panel (5V/3,3V) 20 P29
21 P28 22 P43
23 P32 24 P33
25 P34 26 P35
27 P36 28 P37
29 P38 30 P39
31 GND 32 NC
33 P44 34 NC
35 P45 36 NC
37 P46 38 NC
39 No connection 40 P47
4.4 LVDS connector signals
The following table shows the signals that are present on the LVDS connector J4
J4 Pin Signal J4 Pin Signal
1 LVO0- 2 LVO0+
3 LVO1- 4 LVO1+
5 LVO2- 6 LVO2+
7 LVCK- (Clock-) 8 LVCK+ (Clock+)
9 VDDSAVE (5V/1A) 10 VDDSAVE (5V/1A)
11 GND 12 VBACKSAVE
(12V/1A)
13 VBACKSAVE (12V/1A) 14 GND
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
13
4.5 ZV-Port connector signals
The following table shows the signals, that are present on the ZV-Port connector J15
J15 Pin Signal J15 Pin Signal
1Z0 2 Z1
3Z2 4 Z3
5Z4 6 Z5
7Z6 8 Z7
9Z8 10Z9
11 Z10 12 Z11
13 Z12 14 Z13
15 Z14 16 Z15
17 NC 18 Clock
19 Href 20 Vref
21 Blank 22 DDC SDA
23 DDC SCL 24 NC
25 No connection 26 NC
27 VCC 28 NC
29 No connection 30 GND
4.6 CRT Connector signals
P1 Pin Signal P1 Pin Signal
1 RED 2 GREEN
3BLUE 4 NC
5AGND 6 AGND
7AGND 8 AGND
9NC 10AGND
11 NC 12 DDC_SDA
13 HSYNC 14 VSYNC
15 DDC_SCL
4.7 S-Video connector signals
J29 Pin Signal J29 Pin Signal
1Y 2 C
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
14
4.8 DVI connector signals
For a mechanical front view of the connector, just consult next section.
P2 Pin Signal P2 Pin Signal
1TX2- 2 TX2+
3 SHIELD_GND 4 NC
5 NC 6 DDC_SCL
7 DDC_SDA 8 VSYNC
9 TX1- 10 TX1+
11 SHIELD_GND 12 NC
13 NC 14 VCC
15 GND 16 MSEN
17 TX0- 18 TX0+
19 SHIELD_GND 20 NC
21 NC 22 SHIELD_GND
23 TXCLK+ 24 TXCLK-
C1 RED (analog) C2 GREEN (analog)
C3 BLUE (analog) C4 SYNC
C5 AGND
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
15
5 JUMPER DESCRIPTIONS
This chapter provides description for all the jumper present on MSMV104+. The sections which are red
highlighted present jumper descriptions, which are only available for DVI/LVDS version of the product
MSMV104+.
5.1 J7: LCD Bias power select. (2-jumper)
J7 Pin Open J7 Pin Closed
1-2 VCCLCD: 5V 1-2 VCCLCD: 3.3V
Note: The LCD logic power is fixed 3.3V without buffer.
5.2 J6: LCD backlight select (3-jumper)
J6 Pin 1-2 J6 Pin 2-3
1-2 VBCKL: 12V 2-3 VCCLCD: 5V
5.3 J18: DVI I2C or Deskewing select (2-jumper)
J18 Pin Open J18 Pin Closed
1-2 I2C select 2-3 Deskewing select
5.4 J19: DVI Deskewing increment select or I2C address
Depending on the state of the jumpers J18, J19, these are thought for selecting I2C address or deskewing
increment for DVI interface
J19 Pin Open J19 Pin Closed
1-2 A1/DK1=0 1-2 A1/DK1=1
3-4 A2/DK2=0 3-4 A2/DK2=1
5-6 A3/DK3=0 5-6 A3/DK3=1
5.5 J23: ZV-Port enable/disable jumper (2-jumper)
J23 Pin Open J23 Pin Closed
1-2 Disabled 1-2 Enabled
5.6 J24: graphic controller VDD select (3-jumper)
J24 Pin 1-2 J24 Pin 2-3
1-2 VDD=2.5V 2-3 VDD=3.3V
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
16
5.7 J25: graphic controller MEVDD select (3-jumper)
J25 Pin 1-2 J25 Pin 2-3
1-2 MEVDD=2.5V 2-3 MEVDD=3.3V
5.8 J26: graphic controller MIVDD select (3-jumper)
J26 Pin 1-2 J26 Pin 2-3
1-2 MIVDD=2.5V 2-3 MIVDD=3.3V
5.9 J27: graphic controller VCCA select (3-jumper)
J27 Pin 1-2 J27 Pin 2-3
1-2 VCCA=2.5V 2-3 VCCA=3.3V
5.10 J28: graphic controller RVDD select (3-jumper)
J28 Pin 1-2 J28 Pin 2-3
1-2 RVDD=2.5V 2-3 RVDD=3.3V
5.11 J30: DVI I2C ISEL or RESET select (3-jumper)
J30 Pin 1-2 J30 Pin 2-3
1-2 ISEL/RST=0V 2-3 ISEL/RST=3.3V
5.12 J22: Display configuration jumper
The Lynx3DM graphic controller contains of sixteen register sets, which are free to configure a special
display. It is possible either to choose the correct panel using HW setting or doing selection directly using
the BIOS.
This jumper is thought for hardware adaptation of the display interfaces. The actual BIOS version from
Lynx3DM do not permit this function. To adapt MSMV104+ to your display configuration, the BIOS itself
should enable the display to be adapted.
5.13 Default settings
Some of the jumper settings are fixed to enable normal function of the MSMV104+ product. The following
state of the critical jumpers should be recovered in case something was changed and MSMV104+ does
not enable correct function anymore.
Every setting concerning power supply of the chip should be put to 2.5V.
That is to say: VDD, MEVDD, MIVDD, VCCA; RVDD should all be 2.5V
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
17
5.14 DVI connector pin description
The right part of the following figure shows the front view of the connector together with the pin
description. The pin c5, which can be found in the previous section table is not represented and refers to
the metal cross separating c1, c2 c3 and c4.
Figure 5.8.1a: 3D modeling and front side view of the MicroCross DVI-I P2 connector
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
18
6 DIMENSIONS, CONNECTOR AND JUMPER
LOCATIONS
The following two figures show the dimension of the MSMV104+ V1.2, standard PC/104+ product.
For the connector references please consult the dedicated chapter 5.
6.1 Top view
Figure 6.1a: Top view with connector references and dimensions of the board
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIGITAL-LOGIC AG MSMV104+ manual V1.0
19
6.2 Bottom view
Figure 6.1a: Bottom view with connector references
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table of contents
Other DIGITAL-LOGIC Motherboard manuals
