Digital Watchdog DWC-MV9CMJ User manual

Ceiling mount bracket and junction box for fixed lens
vandal dome cameras
Quick Start Guide
Tel: [phone]
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
DWC-MV9CMJ
WHAT’S IN THE BOX
Ceiling Mount Bracket Mounting Screws and Anchors (6.5x38mm, head diameter 12mm) x3
Bracket-to-Junction Box Mounting Screws (PM4x12mm, head diameter 8mm) x4
Neck Connection Screws (PWM3x6mm) x2
Waterproof Rings for Mounting Screws x8
Ceiling Mount Bracket Mounting Template x1
Junction Box Mounting Screws and Anchors (PA4x25mm, head diameter 8mm, not used) x4
Camera Mounting screws (PM4x16mm, head diameter 8mm) x4
Cable Gland Connector x1

Quick Start Guide
Rev: 12/21
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION
1Assemble the ceiling mount bracket by connecting the bracket base, arm and connector using the neck connection screws.
2Using the mounting template or the mounting bracket itself, mark and drill the necessary holes on the mounting surface.
3Secure the mounting bracket to the mounting surface using the screws and anchors that were included with the mount.
4
Mount the junction box base to the ceiling bracket using the bracket-to-junction box mounting screws and waterproof rings.
5
To mount the camera to the junction box, remove the dome from the camera base using the wrench included with the
camera.
NOTE: Do not touch the lens when handling the camera.
6
Pass wires through and make all necessary connections. Arrange the cables in the junction box base. Use the waterproof cap
and gasket with the network cable to reduce the risk of water leaks. See the camera’s QSG for more information.
7
Secure the camera to the mounting bracket using the included camera mounting screws.
8
Adjust the camera’s lens position and angle and place the cover dome on the camera base to complete the installation.