Digital Watchdog DWC-VAWM User manual

Wall mount bracket for vandal dome, vandal ball and
vandal fisheye cameras
Quick Start Guide
Tel: [phone]
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
Camera Mounting Screws 4Mounting Pad 1
Screws and Plastic Anchors 4Mounting Template 1
Quick Setup Guide 1
M3.0X8.0M3.0X12.0M3.0X20.0M3.0X23.0
DWC-VAWM DWC-VFWMW DWC-VFZWM

Quick Start Guide
Rev Date: 08/21
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION
1
Using the mounting template or the mounting bracket itself, mark and drill the necessary holes on the mounting surface.
2
Secure the mounting bracket to the mounting surface using the screws and anchors that were included with the mount. Use
the mounting pad between the bracket’s arm and mounting surface as needed.
3
To mount the camera to the mounting accessory, remove the dome from the camera base using the wrench included
with the camera.
NOTE: Do not touch the lens when handling the camera.
4
Pass wires through and make all necessary connections.
5
Secure the camera to the mounting bracket using the included screws. See the table below for the length of the screws and
compatible cameras.
Camera mounting screw Screw size Compatible camera
M3.0x23.0 V(P)8 vandal dome cameras
M3.0x20.0 V6 vandal dome cameras and V(P)A
vandal ball cameras
M3.0x12.0 M(P)F and V(P)C vandal dome
cameras, P(P)VF vandal fisheye
cameras.
M3.0x8.0 V(P)7 vandal dome cameras.
6
Adjust the camera’s lens position and
angle and place the cover dome on the
camera base to complete the installation. Wall mount
Camera module
Camera dome cover