Digitrax UR93 User manual
© 2020 Digitrax, Inc. www.digitrax.com— 1 —
Features:
▪LocoNet makes it easy to add UR93 Duplex Radio support to your layout.
▪Provides a Full Duplex radio link to/from the layout with compatible Digi-
trax Duplex Equipped Throttles.
▪
Parts List
UR93 Installation / Quick Start
The UR93 is simple to install and begin using on your LocoNet layout.
1.
2.
3. Connect the UR93 to your working LocoNet system using one of the RJ12
ID
LED will blink at about 2-second interval to indicate that it is working.
4.
That’s all that’s required for installation of your UR93 on LocoNet!
UR93
Complete Train Control
Duplex Transceiver For Duplex
Equipped LocoNet Throttles
E Z
RTS
DCS 210+
R
LOCONET
A B
R
C
PWRPROG N E T TRA C K
STATUS
MODE
RUN
O P
SLEEP
SCALE
O/G
N
H O
+
P
AG
RP
BR
BR
A
5 A LOCO
RESE T
-
8 A
UR93
Complete Train Control
PS615
PS1 4
85-240V A C
85-240V A C
E
D F
Program
Track Mainline
Tracks
DT602D
IEC Cordset
Booster
Ground to
other boosters
LocoNet
compatible
command station Duplex
compatible
throttle
© 2020 Digitrax, Inc. www.digitrax.com— 2 —
To Join Your Throttle to the layout Duplex Group
1.
2.
-
nel and Key number.
3. When this throttle disconnects it will change to Duplex wireless radio opera-
tions and perform most tasks as if it were plugged in to the LocoNet system.
4. Use the e.g. DT602D throttle to select one of the locomotives on your system.
will do a short wink OFF very about 2 seconds to indicate it has an active
settings.
5.
communication problem. This usually indicates a range or interference issue.
6.
-
range.
This ‘tethered’ LocoNet method of joining the UR93 or layout Duplex Group
will always work to join any Duplex throttle to a particular Duplex Group. This
method bypasses the need to know the Key number if it is not 0000, and active.
Alternatively, you can also join in wireless mode! See the DT602 manual for
instructions on; joining a Group without plugging in, and changing Duplex
settings.
Troubleshooting Your Installation
coverage and reliability.
-
tion.
with UR93 location will usually help you locate a position that is best for your
layout and allow reliable operations.
coverage overlap and signal reliability.
-
ers may cause interference on one or more of the Duplex channels 11 to 25. Try
© 2020 Digitrax, Inc. www.digitrax.com— 3 —
Regulatory Information
Declaration of Conformity: “This device complies with part 15 of the FCC Rules.
“This equipment has been tested and found to comply with the limits for a Class
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
-
-
try to correct the interference by one of the following measures: Reorient or relo-
-
-
-
20 mm de séparation du corps humain en tout temps.“
© 2020 Digitrax, Inc. www.digitrax.com— 4 —
Warranty & Repair
Digitrax gives a one year “No Worries” Warranty against manufacturing defects
That’s it! A simple, straightforward warranty with no tricky language!
www.digitrax.com for complete warranty details and instructions for
returning items for repair.
Please return warranty items directly to Digitrax - DO NOT return items
to place of purchase.
make additions or improvements in its products without imposing any obligations upon
-
tured.
Digitrax, Inc. is not responsible for unintentional
errors or omissions in this document.
2443 Transmitter Road
www.digitrax.com
helpdesk.digitrax.com
307-UR93-0001
Table of contents
Other Digitrax Transceiver manuals
