Digitus DA-20311 User manual

LED RING LIGHT 10 INCH,
EXTENDABLE TRIPOD STAND
Quick Installation Guide
DA-20311

2
Table of Contents
1. Introduction ................................................................................2
2. Feature........................................................................................3
3. Package Content .........................................................................4
4. Technical Parameter ...................................................................4
5. Installtion ....................................................................................4
6. Operation....................................................................................6
6.1 Warm light / cold light Conversion.......................................6
6.2 LED Ring Light Can rotate 360 degrees freely ......................6
6.3 Linking Method of Bluetooth Selfie Remote ........................7
7. Safety Caution.............................................................................7
8. Technical details and radio emission..........................................7
1. Introduction
The DIGITUS Ring Light Stand is an LED light that illuminates any
shadow, improves the appearance of the skin and makes the eyes
shine without glare. The ring light has 10 brightness levels and 3 light
modes to illuminate a face optimally when recording videos and
portraits. Cameras/iPhones/Android phones are simply fastened in
the ball-head mount and connected to the Windows PC or Mac via
USB. Settings for brightness and color temperature are configured
using the buttons of the remote control integrated in the cable. The
adjustable tripod stand can be extended from 0.70 m to 1.50 m and
is very stable on the ground. Using Bluetooth remote control,
images/videos can be recorded at a distance of up to 10 m.

3
2. Feature
1. 10-inch LED Ring Light with tripod stand & smartphone mount,
dimmable light in various color tones for YouTube video
recordings, live stream, makeup/photography.
2. Control of color temperature in 3 levels (3000K-6500K) using
the cable remote control for optimal and uniform illumination
e.g. of videos and portraits
3. Light intensity adjustable in 10 levels, from radiant white to
pleasantly muted
4. Charming eye effect: LED Ring Light conjures up a sparkle in the
eyes using reflections
5. Stable tripod stand made of robust and lightweight aluminum,
can be extended up to 1.50 m
6. Smartphone holder with ball head can be rotated for portrait
and landscape format
7. The ring light’s position can be adjusted in all directions using
the ball head
8. Suitable for most smartphones, width adjustable from 6.0 to
8.2 cm (in landscape format) thanks to clamp spring mount
9. The rubber inserts on the mount protect the smartphone
housing from scratches
10. With USB-A cable (cable length 200 cm) to connect a PC or
power bank for mobile use
11. With Bluetooth remote control release

4
3. Package Content
1x Ring Light, with 2 m USB cable
1x Floor stand
1x Phone clip
1x Bluetooth remote control
1x User manual
4. Technical Parameter
Dimension
10”
Fixture Voltage
DC 5V
Lumen
500LM
LED Beads
96 pcs
Dimming
Dimming P10 - 100
Power Supply
USB Power
Color Temperature
3000K - 6500K
5. Installtion
1. Prepare the
folded tripod stand
2. Loosen the screw
knob
3. Use both hands
to pull the stand
legs

5
4. Adjust the stand
legs then tighten
the screw knob
5. Loosen the screw
knobs on the
middle pole and the
top pole
6. Pull the poles up
to the height
(max2.1m) you
want and tighten
the knobs
7. Install the Mobile
Phone Clip on the
Head Ball and
tighten it as the
arrow direction
shows
8. Loosen the
screws at the
bottom and leave
some gaps for
installation on the
ring light
9. Mount the
assembled mobile
phone holder on
the ring of the Ring
light
10. Press the clamp
with your fingers
and rotate to tight
11. Install the Head
Ball on the ring light
and rotate to tight
12. Install the
mounted Head Ball
on the tripod and
rotate it tight
13. Assembly completed

6
6. Operation
6.1 Warm light / cold light Conversion
1
Brightness
adjustment
2
ON/OFF
3
Mode Switch
6.2 LED Ring Light Can rotate 360 degrees freely

7
6.3 Linking Method of Bluetooth Selfie Remote
1. Turn on the Bluetooth selfie remote
switch and the blue light flashes
2. Open the device Settings Bluetooth, find
“AB Shutter 3” click on the ink
3. Open the device Settings Bluetooth, find
“AB Shutter 3” click on the ink
7. Safety Caution
Do not place the product on an uneven surface to prevent
falling damage
Do not exceed the product load power to prevent overheating
and burnout
Do not disassemble or modify the product by yourself
Do not place the product in a low-temperature or damp place
Do not let children operate alone
Keep away from fire
8. Technical details and radio emission
Hardware version
V008
Firmware version
V004
SRD Frequency
2402-2480 MHz
Modulation type
GFSK
RF power
4dBm

8
Hereby Assmann Electronic GmbH, declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of
Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany