diLUSSO TH919DSL User manual

TELESCOPIC HOOD
INSTALLATION INSTRUCTIONS
TH919DSL
To avoid the risk of accident or damage to the
appliance, it is
essential
to read the following
instruction prior to product installation and / or
first time usage
USER MANUAL
TH619DSL
TH633DSL
TH933DSL

Table of Contents
·Important Notes -------------------------------------------- 3
·Specifications ----------------------------------------------- 5
·Vent System Requirements ----------------------------- 5
·Ducted & Re-circulating Mode --------------------------6
·Description of Parts ----------------------------------------8
·Instruction for Use ----------------------------------------- 10
·Technical Information ------------------------------------- 11
·Installation ----------------------------------------------------12
·Cleaning & Maintenance --------------------------------- 13
·Troubleshooting -------------------------------------------- 15
2

Important Notes
Dear Customer
Thank you for choosing our product. This appliance is easy to use; however
please read this handbook carefully before installing and operating it. Here-
in, you will find the correct method of installation and tips for best use and
maintenance of the product.
·This appliance is designed to be handy for any adult to use at home. Do
not allow children to play with it. Children need to be supervised when
the product is in operation so that they do not go near the rangehood.
·This product must be connected in accordance with current electrical
regulations. A fixed wiring installation is to be done only by an
authorised electrician.
·Warning! This Appliance Must Be Earthed.
·Means for disconnection must be incorporated in the fixed wiring in ac-
cordance with the wiring rules.
·Electrical Connection :
Green & Yellow : Earth
Blue : Neutral
Brown : Live
·Fixed wiring must be protected.
·Never use reductions, shunts, adaptors that can cause overheating or
burning.
·It is strictly prohibited to modify any part of this appliance. Modification
is to be done at user own risk.
·Before maintenance or cleaning of the product, disconnect the
appliance from the mains.
3

·For any repairs, always contact authorised Customer Service Centre and
ask for original spare parts. Repairs by untrained people may lead to
damage and void of warranty.
·Packaging cling film, polystyrene and plastic wrappings must be kept out
of reach of babies and young children to avoid suffocation.
·Do not connect the appliance if there are obvious signs of transportation
damage. If the supply cord is damage, it must be replaced by the
manufacturer, or its service agent.
·Ensure the location in which this appliance is installed has good,
permanent ventilation.
·The distance between the benchtop to the lower part of the hood must
not be less than 70cm and it is not recommended to be more than 75cm
for optimal operation.
·Do not leave lit gas burners exposed due to risk of fire.
·The exhaust from the rangehood must not be discharged into any
heating flue.
·This product must not be disposed with the domestic waste. It has to be
disposed at an authorised bin for recycling the appliances.
·This appliance is not intended for use by person (including children) with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge. Unless, they have been given supervision or instruction
regarding the use of appliance by personnel who is responsible for their
safety.
·There is risk of catching fire if cleaning is not carried out in accordance
with the frequency suggested and instructions.
The manufacturer shall not be liable for any direct or indirect damage caused
by faulty installation. The installer must ensure that the product installation and
connection complies with the local and general regulation in force.
4

Specifications
TH619DSL TH919DSL TH633DSL TH933DSL
Input : 220-240V~ 220-240V~ 220-240V~ 220-240V~
/ 50-60 Hz / 50-60 Hz / 50-60 Hz / 50-60 Hz
Absorption : 130W 130W 260W 260W
Lamps : 2 x 2W 2 x 2W 2 x 2W 2 x 2W
Total Power : 134W 134W 264W 264W
Vent System Requirements
Vented system must be terminated to the outside. Ductwork can extend either through
the wall or the roof. Do not terminate the vent system in an attic or other enclosed ar-
ea.
The length of the ductwork and the number of elbows should be kept to minimum to
provide efficient performance. The size of the ductwork should be uniform. Do not
install two elbows together. Use duct tape to seal all joints in the ductwork system. Use
caulking to seal exterior wall or floor opening around the cap.
Flexible ductwork is not recommended. Flexible ductwork creates back pressure
and air turbulence that greatly reduces performance.
Make sure there is proper clearance within the wall or floor for exhaust duct before
making cutouts. Do not cut a joist or stud unless absolutely necessary. If a joist or stud
must be cut, then a supporting frame have to be constructed.
5

Ducted Vs Re-Circulating Mode
Your cooker hood is configured to be operated in the ducted or recirculating
mode (depending on model).
Ducted Mode (Vented Mode)
Cooking fumes are vented outdoors through suitable
connection of 150mm diameter. In this mode, only
the aluminum filters are installed.
IMPORTANT!
Recirculation holes must be covered with a plate provided in ducted mode.
6
Recirculation holes
cover

Re-circulating Mode (Depending on models)
Fumes are filtered for grease and odours through the aluminium grease filters
and the charcoal filters respectively and re-introduced into the kitchen
environment. In re-circulating mode, both aluminium grease filters and the
charcoal filters must be installed.
IMPORTANT!
Recirculation holes cover must be removed.
Hood outlet must be covered with a plate provided.
7
Hood outlet cover
Charcoal filter

Description of Parts
8

9
No Quantity Part
1 1 Rangehood body with integrated motor, controls &
light
2 2 Flaps
3 1 Outlet adaptor
4 1 Outlet cover
5 1 Recirculation holes cover
6 2 Charcoal filter (Optional)
7 2 Aluminium filter
8 1 User manual
9a 4Mounting screws M5*40
9b 4Mounting gasket

Instructions for Use
By pressing the button shown below, you will be able to control the functions
of the extractor.
To achieve better extraction, we recommend to switch on the extractor a few
minutes before starting to cook (3—5 minutes) so that the air flow is
continuous and stable when extracting fumes.
Likewise, keep the extractor switched on for a few minutes when cooking is
complete to allow all fumes and odors to be expelled.
10
Speed
Light

Technical Information
TH619DSL
TH919DSL
TH633DSL
TH933DSL
11
7

Installation
To fix the rangehood to the kitchen unit.
The lower part of the hood must be located at a minimum height of 70cm
above the hob for electric and gas cookers. If the instructions of a gas cooker
indicate a greater distance these must be observed.
When the rangehood is working at the same time as other non-electrical
cooking equipment, the outlet air pressure must not exceed 4 Pa.
To achieve optimum performance the length of the outlet hose should not
exceed 4 meters, or include more than two 90 angles (elbows)
12
Insert 4 mounting screws with 4 mounting gaskets to fix the hood.
Drill a hole of 140mm diameter for hood outlet, 4*Ø8mm mounting holes and
one clearance for power cord on the cabinet board referring to the following :

Cleaning & Maintenance
Before carrying out any cleaning or maintenance activities, ensure that the
appliances is disconnected from the mains and follow the safety Instructions.
Aluminium Filter Cleaning
To withdraw the filters from their locations release the anchoring points. Clean
the filter either putting in the dishwasher (refer to notes) or leaving it standing
in hot water to simplify the removal of grease or, if wished, by means of
special sprays (protecting the non metallic parts). Once clean, leave it to dry.
Notes: cleaning in the dishwasher with aggressive detergents may blacken
the surface of metallic parts, without this affecting its gas retaining properties.
The filter must be cleaned at least once a month depending on how often the
appliances is used. It must be remembered that grease is deposited in the
extractor when cooking, whether it is switched on or not.
Activated Charcoal Filter
To install the charcoal filter, place the motor anchorage to coincide with char-
coal filter anchor points and turn clockwise. Charcoal filters roughly last about
3-6 months depending on the appliance usage. Charcoal filter is to be
changed when the flue is getting smaller.
Cleaning the appliances body
The use of (40ºC approx.) soapy water is recommended. A cloth moistened in
this water is used for cleaning the extractor, paying special attention to the
grids and dry it using a lint-free cloth.
Note: Never use metallic scouring pads or abrasive products that could dam-
age the surface.
Do not use scrapers with metallic surfaces such as knives, scissors etc
13

Changing Bulbs
Disconnect the mains beforehand and check that the bulbs to be replaced are
not hot. Take off the lamp cover.
Loosen the lamp anticlockwise. Replace with 2W E14 LED lamp.
LED spec :
·CTH06-78A(D15)
·Max wattage : 2W
·Voltage : 220-240V~
·Dimension : diameter 35mm / length 98mm
·ILCOS D code : DR-2-H-E14-35/98
14

Troubleshooting
This product is fitted with a safety cutout device.
If the rangehood is installed too close to the cooker, flambé cooking, operating
the cooktop without cooking utensils and blocked filters may activate the safety
cutout device. If the rangehood stops during operation, correct the faults and
allow time for the safety cutout device to reset. Then the rangehood will function
correctly. Do not operate cooktop without cooking utensils.
15
Symptoms Possible Causes Action
Does not function No power supply
Check that the plug is
connected
Check that the main
switch is turned on
Poor airflow Aluminum filters grease
clogged
Clean the filters and fix
it back when it is dry
Motor running but no
airflow
Butterfly valve jammed Contact technician
High temperature safety
device activated
The kitchen is not
sufficiently ventilated
The hood is installed too
near the cooking stove
The hood must be at
least 65cm above the
stove
Oil dripping onto stove Aluminum grease filter
saturated
Clean the filters and fix
it back when it is dry
Whirring sound Foreign object in contact
with fan blade
Contact technician
Motor cuts off after a
few minutes

Schematic Diagram