Direct Voltage 5 Axis User manual

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
EMAIL:[e-mail] WEB: HTTP://directvoltage.com
User Manual of
5Axis Breakout Board

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
ECG Safety Statement
Direct Voltage LLC is not liable or responsible for any accidents, injuries, equipment damage,
property damage, loss of money or loss of time resulting from improper use of electrical or
mechanical or software products sold on this website or other Direct Voltage LLC sales resources.
Since Direct Voltage LLC basically provide OEM machine builders components to build their
machines for their own use or third party use it is their responsibility to maintain certify and
comply the end user products built base on out components sold on this website or other Direct
Voltage LLC sales resources.
Assembling electrical CNC machine component like power supplies, motors, drivers or other
electrical components involve dealing with high voltage like AC alternative current or DC direct
current which is extremely dangerous and need high attention & essential experience and
knowledge of software, electricity, electro-mechanics or mechanics.
For technical question please contact us at [email protected] before purchase.
2016 Direct Voltage LLC
All Rights Reserved

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
Contents
1Introduction and Features..........................................................................................................1
1.1 Introduction...................................................................................................................1
1.2 Features.........................................................................................................................1
2Specifications............................................................................................................................1
3Interfaces...................................................................................................................................2
4Wiring Diagram for Reference..................................................................................................3
5MACH3 Software Settings .......................................................................................................3

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
1
1Introduction and Features
1.1 Introduction
The latest upgraded 5 axis breakout board is specially designed for the CNC single axis 2-phase
stepper driver controller, such as M542, M542H, MA860H, 2M542, 2M982, DM542(A),
DM860(A) etc. single axis stepper driver controller series. With this 5 axis breakout board, any
1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3,
EMC2, KCAM4, etc.
1.2 Features
Maximum support 5-axis stepper motor driver controllers
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
USB power supply and peripherals powered phase are separated to protect computer security.
All the signals are opto-isolated which can protect your computer security.
5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
Wide input voltage range: 12-24V, and with anti-reverse function.
One relay output control interface, accessed by the spindle motor or the air pump, water
pump, etc.
Output 0-10V analog voltage for inverter to control the spindle speed.
2Specifications
Electrical properties(ambient temperature Tj = 25︒C)
Input Power
USB port to directly get power from PC and
12-24V power supply(optional)
Compatible Stepper Motor Driver
Max 5 2-phase Microstep controllers
Driver type
Pulse and Direction signal control
Net/Total Weight
Approx 75g
Dimensions
90 * 70 * 20mm (L*W*H)

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
2
3Interfaces

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
3
4Wiring Diagram for Reference
5MACH3 Software Settings
Note: The settings on MACH3 below is in condition that breakout board and stepper drivers are
connected in common anode.
1. Check whether the MACH3 driver is installed correctly.

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
4
2. Setup Units: Choose “MM’s” in Config->Set Default Units for Setup
3. Click “Config”->”Ports and Pins” on Main Interface.

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
5
4. Enter in “Port Setup and Axis Selection” to set “Port#1” and “Kernel Speed” shown as
below.
5. Click “Motor Outputs”to set it shown as below.
6. Click “Iutput Signals” to set it shown as below.

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
6
7. Click “Output Signals” to set it shown as below.

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
7
8. Click “Spindle Setup” to set it shown as below.

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
8
If you use PWM to control the spindle speed, you have to click “Pulley Selection”to set it
shown as below.
9. Motor debugging. Click Config->MotorTurning and Setup

5 Axis Breakout Board Interface Adapter Direct Voltage LLC
9
10. Click “System HotKeys Setup”. Set X, Y, Z axis hotkey shown as below. Then you can
manual control the corresponding axis motor turning via hotkeys.