Discount Car Stereo BLU-CHRY02 Instruction Manual

Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
BLU-CHRY02
QUICK START INSTALLATION GUIDE FOR CHRYSLER RADIOS WITH “MODE” BUTTON

PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
•Careless installation and operation can result in equipment damage.
Requirement
Radio with 10-pin CD changer port and MODE button
Introduction
Many with older cars looking for a simply way to keep original radio and play
their audio devices will be pleased to find this solution. The BLU-CHRY02 adapter
provides a music streaming solution for any Smartphone or Tablet with A2DP
profile. (Not for hands-free calling)
A Bluetooth connection means no wires, clutter or complicated setup. The BLU-
CHRY02 plug-n-play solution connects to the 10-pin CD changer/Sat radio port
which guarantees to best possible sound.
See Frequently Asked question at the end of this guide for details.
Installation
Radio removal required to access the connector. Vehicle specific radio removal
is not part of this guide but may be available upon request.
With radio out;
1. Connect module 10-pin plug (See Fig. 1) to radio 10-pin connector, (See
Fig. 2) Any factory option (satellite radio, CD changer etc.) must be
permanently disconnected.
Fig. 1
10-pin plug
Fig. 2
Radio 10-pin connector
2. Connect harness 8-pin plug (See Fig. 3) to module 8-pin connector
(See Fig. 4)
Fig. 3
Installation harness

Fig. 4
module
3. Secure module and proceed to paring.
Pairing
Pairing process varies among devices but basic pairing steps are the same. This
process is done upon initial install and will not have to be repeated
1. Turn Ignition and radio “ON”
2. Go to Settings, Bluetooth Settings
3. Select Bluetooth and turn on.
4. Scan for devices .
5. Wait for Bluetooth device name (See below) to appear and select it.
(See Fig. 5)
LED inside module will glow steady (paired)
Fig. 5
Optional remote control
The remote control is not required for module to work as described; however, it
makes for a safer ride as user will not have to fumble the audio device while
driving. (Does not control Chrysler radio operation)
Optional Bluetooth wireless remote control allows users to:
1. Control music wirelessly
2. Track up/down
3. Volume up/down
Pairing:

Controls:
Use Bluetooth wireless remote to perform the following functions on iOS7.0 and
higher or Android 4.4 and higher.
Package Contents:
Operation
1. Turn ignition and radio “ON”
2. Press “MODE” button on radio to enter Bluetooth mode (See Fig. 6)
Fig 6
3. Launch Smartphone or Tablet streaming application and verify audio
device “media’ volume is set to 80% or more
4. Turn radio volume control button to set playback level.
Warning: Playlist, Track selection, text display etc. is *NOT* possible
from the Chrysler radio. Use the audio devices built-in controls or
purchase optional remote control to control audio files.
5. If correct operation is confirmed go ahead and reinstall radio.

Frequent ask questions & troubleshooting
1. Will the BLU-CHRY02 work on all Chrysler radios with 10-pin port?
NO; For the BLU-CHRY02 to work as described, factory radio must have:
10-pin port (See Fig. 2) a “MODE” button, DISC up on Preset #1 and DISC
down on Preset #5 as seen in Fig. 7.
Radios with MODE button without pointers on Preset #1 and #5 are
NOT compatible.
Fig. 7
2. My vehicle has a “rounded face” radio with CD-C button. Will the BLU-
CHRY02 work?
NO, radios with CD-C button and 8-pin CD changer port requires our BLU-
CHRY98.
3. My 2002 radio does NOT have a Mode button, will this adapter work?
NO; Radios without “MODE” button are NOT capable of connecting to this
device. Works only on radios described in question 1 and pictured in Fig. 8
4. Can I use the BLU-CHRY02 for hands-free calls?
NO;The BLU-CHRY02 is for music streaming and does not support hands-
free calls, Purchase our A2DIY-CHRY02
5. Will I have to disconnect satellite radio or remote CD changer?
YES, this module uses the 10-pin radio port and any factory option already
in place must be permanently disconnected.
6. Will radio screen display song name etc.?
NO;Song, artist, genre, etc are not displayed on radio screen
Disclaimer
• This product has no affiliation with Chrysler
• We’re not liable for misuse of this product.
•We recommend professional installation
For support email suppo[email protected]
© 1995-Sep-21 Discount Car Stereo, Inc. All rights reserved. Information in this document is
subject to change without notice. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or mark holders.