Displays2go IPMEDWH129 User manual

REV. 09/20 1 of 2
ASSEMBLY INSTRUCTIONS
Rolling Medical Tablet Kiosk with Handle
PARTS:
Assemble the wire basket (IPDMEDBS, sold separately)
Assemble the base with the pole using 4 included screws and tighten them to secure the stand.
Attach the tablet enclosure to the top of the stand and fix it with screws and nuts.
Before assembling each accessory, insert needed T-slot nuts into the
T-slot on the side of the upright pole from the bottom.
Slide the nuts up to the desired height and hold them when assembling.
Assemble the laptop tray (IPDMEDTR, sold separately)

2 of 2
ASSEMBLY INSTRUCTIONS
Mobile Medical Tablet Kiosk
Assemble the power strip cleats (IPDMEDCL, sold separately). Attach the cleats to the pole by using screws. Do NOT tighten screws
completely. Place your power strip (not included) in between the cleats and adjust the height as needed. Tighten screws to secure the power
strip.
Assemble the lockable utility box (IPDMEUTBX, sold separately). Attach 2 brackets to the pole first, then fix the utility box onto the bracket
securely.
Wire your charging cable (not included) through the pole and connect to your tablet (not included) and power strip. See the suggested
connecting method below: