DIVERSIFIED DT-30A User manual

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
1 OF 12NTS
EMR 1/15/15
NOTE:
1. MODEL VIEWS MAY NOT REPRESENT EXACT MODEL PURCHASED
DRAWING TABLE SYSTEM
DT-30A, DT-60SA, & CDTC-70
ASSEMBLY INSTRUCTIONS
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:10:25 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
TOOLS AND ASSEMBLY COMPONENTS
REV A
2 OF 12NTS
EMR 1/15/15
NOTE:
1. **XX** INDICATES ITEMS ONLY USED FOR THE CDTC-70.
ASSEMBLY COMPONENTS
ITEMS INCLUDED PART # PART DESCRIPTION QTY
TOP AND APRON ASSEMBLY N/A TOP ASSEMBLY (FACTORY ASSEMBLED) 1
LEGS 501102 LEG,MPL 2.25X2.25X38.25 4
LEG HARDWARE KIT 520001-4 LEG HARDWARE KIT, 4 LEGS 1
LEG BRACE N/A LEG BRACE - 24.00" LONG 2
STRETCHER N/A STRETCHER - 37.50" LONG 1
CONFIRMATS - LEGS 227578 SCREW,7MMX90MM,CONN,ALLENHEAD,
BLACK 8
CONFIRMATS - STRETCHER 228564 SCREW,7MMX50MM,CONN,ALLENHEAD,
BLACK 4
PENCIL LEDGE 14-0027 PENCIL LEDGE - 22" 1
SCREWS - PENCIL LEDGE 236263 SCREW,#6X34 TRUSS HEAD,QUAD,BLACK 3
**CPU SUPPORT** N/A SUPPORT,CPU,EB4,1.00X7.00X32.50 1
**SCREWS - CPU SUPPORT** 100649 SCREW,#8X3/4 PHIL TRUSS HEAD SMS 6
**CPU BRACKET** 257521 BRACKET,MOUNTING,CPU,BLK 1
**CPU BRACKET KNOB** 257522 KNOB,TWO ARM, 1/4-20, BLACK 2
**CPU BRACKET RUBBER
BUMPERS** 206604 BUMPER,RUBBER, 18"THK X 12" DIAM 12
**KEYBOARD TRAY KIT** 214416 TRAY,KEYBOARD,SLIDE OUT,#KVKD100 1
**MONITOR BASE ASSEMBLY** 243335 HAFELE MONITOR BASE ASSEMBLY 1
**MONITOR ARM** 15-0185 HAFELE FLAT SCREEN ARM 1
TOOLS REQUIRED
12" WRENCH
12" SOCKET AND TORQUE WRENCH - OPTIONAL
4MM ALLEN WRENCH
SCREW DRIVER
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:10:30 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
3 OF 12NTS
EMR 1/15/15
NOTE:
1.
STEP 1:
•LAY APRON ASSEMBLY ON FLOOR
WITH APRON SIDE FACING UP.
**NOTE**
BE SURE TOP ASSEMBLY IS ON A
CLEAN SURFACE SUCH AS
PACKAGING FOAM, CARDBOARD,
OR A BLANKET TO PREVENT DAMAGE
APRON SIDE
FACING UP
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:10:35 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
4 OF 12NTS
EMR 1/15/15
NOTE:
1.
STEP 2:
•INSERT HANGER BOLT ON ONE LEG THROUGH THE CORNER BRACKET AND
INSERT LOCK WASHER AND HEX NUT.
•SCREW ON NUT USING A 12" WRENCH OR 12" SOCKET AND TORQUE WRENCH.
•DO NOT TIGHTEN ALL THE WAY.
•REPEAT FOR THE OTHER LEG.
•THE LEGS WITH A CHAMFER MUST GO ON THE FRONT OF THE TABLE WITH
CHAMFERED EDGE FACING OUT.
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
CLOSE UP OF CORNER LEG ASSEMBLY CLOSE UP OF LEG WITH A CHAMFER
FRONT APRON
FRONT LEG BACK LEG
LEGS WITH A
CHAMFER NEEDS TO
BE FACING OUT
HINGE
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:10:40 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
5 OF 12NTS
EMR 1/15/15
NOTE:
1.
STEP 3:
•SCREW LEG LEVELERS INTO
T-NUT ON BOTTOM OF LEGS.
CLOSE UP OF LEG LEVELER ASSEMBLY
LEG LEVELER
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:10:45 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
6 OF 12NTS
EMR 1/15/15
NOTE:
1.
STEP 4:
•ATTACH BRACES TO LEGS.
•INSERT CONFIRMATS INTO ONE LEG AND SCREW INTO BRACE.
•REPEAT FOR OTHER LEGS.
•MAKE SURE BRACES ARE STRAIGHT AND ALL CONFIRMATS ARE SECURE.
LEG BRACE - TYPICAL
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:10:50 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
7 OF 12NTS
EMR 1/15/15
NOTE:
1.
STEP 5:
•ATTACH STRETCHER TO BRACE WITH HARDWARE PROVIDED.
•GO BACK TO STEP 2 AND TIGHTEN UP THE HANGER BOLTS FOR
EACH LEG USING A 12" WRENCH OR 12" SOCKET AND TORQUE
WRENCH, TO A MINIMUM OF 12FT LBS BUT NOT TO EXCEED 17FT LBS .
STRETCHER
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:10:55 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
8 OF 12NTS
EMR 1/15/15
NOTE:
1.
STEP 6:
•IF YOUR TABLE DOES NOT HAVE A KEYBOARD TRAY OR CPU
SUPPORT SKIP TO STEP 9.
•ATTACH KEYBOARD TRAY TO THE TWO KEYBOARD MOUNTING
BOARDS WITH THE HARDWARE PROVIDED.
•IT MAY BE EASIER TO ATTACH KEYBOARD TRAY WHILE TABLE IS
ON ITS TOP.
•ATTACH THE MONITOR POST TO THE TOP USING HARDWARE
PROVIDED (NOT SHOWN).
TOPS REMOVED TO SHOW CLARITY
KEYBOARD MOUNTING BOARD - TYPICAL
KEYBOARD TRAY
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:11:00 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
9 OF 12NTS
EMR 1/15/15
NOTE:
1.
STEP 7:
•ATTACH CPU SUPPORT TO LEG BRACE AND APRON ASSEMBLY WITH
HARDWARE PROVIDED.
•THE SUPPORT SHOULD LAY FLUSH AGAINST BOTTOM OF LEG BRACE
AND STRETCHER.
•THERE WILL BE A SMALL GAP BETWEEN TOP OF APRON ASSEMBLY
AND TOP OF SUPPORT.
TOPS, KEYBOARD TRAY, AND KEYBOARD
MOUNTS REMOVED TO SHOW CLARITY
CPU SUPPORT
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:11:05 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
10 OF 12NTS
EMR 1/15/15
NOTE:
1.
STEP 8:
•INSTALL CPU BRACKETS TO SUPPORTS USING
APPROPRIATE HARDWARE FOR YOUR APPLICATION.
•SEE STEP 9 FOR DETAILED INSTRUCTIONS ON HOW TO
INSTALL CPU BRACKET.
TOPS, KEYBOARD TRAY, AND KEYBOARD
MOUNTS REMOVED TO SHOW CLARITY
CPU
BRACKET
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:11:10 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
11 OF 12NTS
EMR 1/15/15
NOTE:
1.
STEP 9:
•SCREW BACK PLATE OF CPU BRACKET ONTO CPU SUPPORT WITH PROPER HARDWARE.
•BACK PLATE WILL HAVE SCREW HOLES TO ATTACH TO CPU SUPPORTS .
•TAKE FRONT PLATE OF CPU BRACKET AND ATTACH TO BACK PLATE.
•FRONT PLATE WILL HAVE SLOT HOLES FOR ADJUSTING TO CORRECT WIDTH.
•USING THE (2) KNOBS, ADJUST PLATES TO CORRECT SIZE AND SCREW TWO PLATES TOGETHER.
•MAKE SURE KNOBS ARE ON TIGHT AND SECURE.
•PLACE RUBBER BUMPERS IN DESIRED LOCATION - (4) ON EACH SIDE AND BOTTOM.
BACK PLATE
FRONT PLATE
1ST
2ND
KNOB - TYPICAL
DETAIL - A
3RD -
RUBBER
BUMPER - TYPICAL
CLOSE UP OF CPU BRACKET
CPU SUPPORT
SEE DETAIL - A
FOR CPU
BRACKET
INSTALLATION
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:11:15 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/15/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
12 OF 12NTS
EMR 1/15/15
NOTE:
1.
STEP 10:
•LINE UP PENCIL LEDGE ON SIDE OF ADJUSTABLE TOP
IN DESIRED LOCATION.
•PRE-DRILL HOLES IN TOP TO PREVENT SPLITTING.
•SCREW PENCIL LEDGE TO TOP USING HARDWARE
PROVIDED.
•SET YOUR TABLE IN PLACE.
•ADJUST LEG LEVELERS TO LEVEL TABLE.
•INSTALL MONITOR ARM TO TOP USING APPROPRIATE
HARDWARE FOR YOUR APPLICATION.
COMPLETE UNIT SHOWN
PENCIL LEDGE
MONITOR ARM
K:\AutoCAD\Assembly Instructions\DT-30A, DT-60SA, & CDTC-70.dwg,
1/25/2022 10:11:20 AM, DWG To PDF.pc3