JWA HALCYON 68148 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
HALCYON
ITEM CODE:68148
Dining Table

Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2.Take care when lifting. Product should be assembled as near as possible to the
point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
7.Assembly is to be carried out by a competent adult(s) ONLY
8.During assembly, children should be kept away from the product due to possible
risk to injury.
9.Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
2
PRE-ASSEMBLY PREPARATION
Allow 30 min For 2 person

3
PARTS LIST
①TABLE TOP
②CONNECTIONG PLATE
③TRUNK
④BASE
①
②
③
④

•Insert bolt 3 x B into 3 x Washer A. Use Allen Key E
to connect the Connecting plate ②with the trunk ③.
4
STEP 1:
②
③

•Place the table top ①, ontp a padded/protected
surface, upside down. Insert 4 x bolt C into 4 x
Washer A. Use Allen Key E to connect the
Connecting plate ②to the table Top ①.
5
STEP 2:
②
①
③

•Insert 3 x bolt D into the Base ④. Use Allen Key E to
connect the Base ④with the Frame ③. Stand the
table the right way up when complete.
6
STEP 3:
④
③
②
①

7
ASSEMBLY IS COMPLETE

8
PRODUCT CARE:
Hi-gloss lacquered furniture is more sensitive to marks and scratching then some
other furniture products. It is important to exercise caution and care to maximise
the life and beauty of this product
Following the below simple guidelines when using your hi-gloss product will protect
your investment for years to come
•Dust frequently with a clean damp lint-free cloth. This will help remove abrasive
build up which can damage a finish over time
•Avoid using chemicals or solvents when cleaning the product
•Do not place hot objects on any furniture surface.Always use a hot plate or
placemat. Lacquer finishes provide added scratch and heat resistance to our
furniture, but they can still be damaged without proper care
•Avoid exposing your furniture to strong sunlight, heat outlet, open windows or
dampness. Prolonged exposure to direct sunlight can fade the finish of your
furniture, while extreme temperature and humidity changes can cause cracking
or splitting
•Do not expose your furniture to any liquids. Never allow water to sit on your
furniture.Alcohol, nail polish and perfume are also dangerous as they will
dissolve the lacquer finish on contact and may require professional repairs
•Do not allow plastic to come in direct contact with your furniture. Chemicals in
the plastic of placemats etc. may soften and mark the finish if left in contact with
the furniture for a period of time
•Avoid placing sharp or rough objects on the surface of your furniture. These may
scratch the surface of the product
•When moving your furniture, do not drag it across the floor. This may damage
the product. Instead use two (2) people to lift carefully from either end