DIVERSIFIED DT-31A User manual

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/13/15
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-31A, 61SA, & CDTC-71
DRAWING TABLE SYSTEM - DRAWERS
ASSEMBLY INSTRUCTIONS
REV A
1 OF 15NTS
EMR 1/13/15
NOTE:
1. MODEL VIEWS MAY NOT REPRESENT EXACT MODEL PURCHASED
DRAWING TABLE SYSTEM
DT-31A, DT-61SA, & CDTC-71
ASSEMBLY INSTRUCTIONS
K:\AutoCAD\Assembly Instructions\DT-31A, DT-61SA, & CDTC-71.dwg,
1/25/2022 10:13:05 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/13/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-31A, 61SA, & CDTC-71
DRAWING TABLE SYSTEM - DRAWERS
TOOLS AND ASSEMBLY COMPONENTS
REV A
2 OF 15NTS
EMR 1/13/15
NOTE:
1. **XX** INDICATES ITEMS ONLY USED FOR THE CDTC-71.
ASSEMBLY COMPONENTS
ITEMS INCLUDED PART # PART DESCRIPTION QTY
TOP AND APRON ASSEMBLY N/A TOP ASSEMBLY (FACTORY ASSEMBLED) 1
CABINET N/A CABINET - 10.625"W X 26.50"D X 27"H 1
LEGS 501102 LEG,MPL 2.25X2.25X38.25 4
LEG HARDWARE KIT 520001-4 LEG HARDWARE KIT, 4 LEGS 1
LEG BRACE N/A LEG BRACE - 24.00" LONG 2
STRETCHER N/A STRETCHER - 37.50" LONG 1
CONFIRMATS - LEGS 227578 SCREW,7MMX90MM,CONN,ALLENHEAD,
BLACK 8
CONFIRMATS - STRETCHER 228564 SCREW,7MMX50MM,CONN,ALLENHEAD,
BLACK 4
BRACKETS - CABINET 100355 BRACKET,RAIL 1.25X1.25X4.25 3
SCREWS - BRACKET 100649 SCREW,#8X34 PHIL TRUSS HEAD SMS 12
PENCIL LEDGE 14-0027 PENCIL LEDGE - 22" 1
SCREWS -PENCIL LEDGE 236263 SCREW,#6X34 TRUSS HEAD,QUAD,BLACK 3
**CPU SUPPORT** N/A SUPPORT,CPU,EB4,1.00X7.00X32.50 1
**SCREWS - CPU SUPPORT** 100649 SCREW,#8X3/4 PHIL TRUSS HEAD SMS 6
**CPU BRACKET** 257521 BRACKET,MOUNTING,CPU,BLK 1
**CPU BRACKET KNOB** 257522 KNOB,TWO ARM, 1/4-20, BLACK 2
**CPU BRACKET RUBBER
BUMPERS** 206604 BUMPER,RUBBER, 18"THK X 12" DIAM 12
**KEYBOARD TRAY KIT** 214416 TRAY,KEYBOARD,SLIDE OUT,#KVKD100 1
**MONITOR BASE ASSEMBLY** 243335 HAFELE MONITOR BASE ASSEMBLY 1
**MONITOR ARM** 15-0185 HAFELE FLAT SCREEN ARM 1
TOOLS REQUIRED
12" WRENCH
12" SOCKET AND TORQUE WRENCH - OPTIONAL
4MM ALLEN WRENCH
SCREW DRIVER
K:\AutoCAD\Assembly Instructions\DT-31A, DT-61SA, & CDTC-71.dwg,
1/25/2022 10:13:14 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/13/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-31A, 61SA, & CDTC-71
DRAWING TABLE SYSTEM - DRAWERS
ASSEMBLY INSTRUCTIONS
REV A
3 OF 15NTS
EMR 1/13/15
NOTE:
1.
STEP 1:
•LAY APRON ASSEMBLY ON FLOOR
WITH APRON SIDE FACING UP.
**NOTE**
BE SURE TOP ASSEMBLY IS ON A
CLEAN SURFACE SUCH AS
PACKAGING FOAM, CARDBOARD,
OR A BLANKET TO PREVENT DAMAGE
APRON SIDE
FACING UP
K:\AutoCAD\Assembly Instructions\DT-31A, DT-61SA, & CDTC-71.dwg,
1/25/2022 10:13:19 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/13/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-31A, 61SA, & CDTC-71
DRAWING TABLE SYSTEM - DRAWERS
ASSEMBLY INSTRUCTIONS
REV A
4 OF 15NTS
EMR 1/13/15
NOTE:
1.
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
LEGS WITH A
CHAMFER NEEDS TO
BE FACING OUT
CLOSE UP OF LEG WITH A CHAMFER
CLOSE UP OF CORNER LEG ASSEMBLY
STEP 2:
•INSERT HANGER BOLT ON ONE LEG THROUGH THE CORNER BRACKET AND
INSERT LOCK WASHER AND HEX NUT.
•SCREW ON NUT USING A 12" WRENCH OR 12" SOCKET AND TORQUE WRENCH.
•DO NOT TIGHTEN ALL THE WAY.
•REPEAT FOR THE OTHER LEG.
•THE LEGS WITH A CHAMFER MUST GO ON THE FRONT OF THE TABLE WITH
CHAMFERED EDGE FACING OUT.
FRONT LEG
FRONT APRON
HINGE
K:\AutoCAD\Assembly Instructions\DT-31A, DT-61SA, & CDTC-71.dwg,
1/25/2022 10:13:24 AM, DWG To PDF.pc3

NAMEDATEDESCRIPTION
REVISION LEVEL
NAMEDATEDESCRIPTION
EMR1/13/15CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE: SHEET:
DRAWING NUMBER:
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.

THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS: .X = ± .030
.XX = ± .020
.XXX = ± .010
ANGLES: = ± 1°0'
CABINET SQUARENESS = ± .0625
DT-31A, 61SA, & CDTC-71
DRAWING TABLE SYSTEM - DRAWERS
ASSEMBLY INSTRUCTIONS
REV A
5 OF 15NTS
EMR 1/13/15
NOTE:
1.
STEP 3:
•SCREW LEG LEVELERS INTO
T-NUT ON BOTTOM OF LEGS.
CLOSE UP OF LEG LEVELER ASSEMBLY
LEG LEVELER
K:\AutoCAD\Assembly Instructions\DT-31A, DT-61SA, & CDTC-71.dwg,
1/25/2022 10:13:29 AM, DWG To PDF.pc3