DivioTec NDR153 User manual

IP CAMERA
Quick Installation Guide
NDR153
Series V1.0
PRECAUTIONS
1. OPEN-CASE INSPECTION
2. PRODUCT STRUCTURE 3. EQUIPMENT INSTALLATION
lDo not use the camera in extreme temperature
conditions.
Please use the camera within -20oC to 50oC
Air vent is required at high temperature
lDonotuse or storethecamera inhumidenvironment
It may cause poor image quality.
lDo not usethe camera inunstable lighting conditions.
Inconsistent lighting or ickering may cause poor image.
lNever use the camera close to gas or oil leak.
It may not operate properly.
lDo not disassemble the camera.
There is no user serviceable part inside.
lDo not drop the camera or apply force on it.
It may cause a malfunction.
1.1 Check step
When a user receives an IP camera, Please check the equipment
appearance without obvious damage. Product packaging use
protective material to deal with most accidental impact in the
transport process.
Please open the product outer packing,Check attachment provided
product is complete,See List 1 below accessories package for
inspection.
1.2 Standard accessories
Please make sure the item is consistent with the listing when
open the product outer packing,Detailed list please see the table
below,Actual conguration, please refer to specic products. Description:
3.1 Put the installation sticker on the ceiling.
3.2 Remove base of camera and camera. Use expansion
bolts and mounting screws to fix the base of camera
on the ceiling.
3.3 Adjust the direction of camera which it is fixed as your
requirement.
3.4 Put camera top-cover housing back to fix with base on
the ceiling.
2.1 Cable function
2.2 Dimensions
REMARK: External power supply cannot be used with POE
simultaneously, or it will damage the camera.
When this camera is installed near wireless communication devices that
emit strong electromagnetic field, irregularity such as noise may appear in
the image.
List 1 Accessories list
Picture 1 Cable function
Picture 3 Equipment installation diagram (1)
List 2 Cable function of table
Picture 2 Dimensions
Name Quantity
IP camera 1
Quick installation guide 1
Accessory pack 1
NO. Name Functional description
1 LAN(RJ45)
Connect to a router or switch on your
network using RJ45 Ethernet cable
(Cat5e or better). 100Mhz connection.
PoE supported (class 3 PoE switch
required).
lNever face the camera to strong light for long periods
of time.
It may damage the CMOS sensor.
NO. Name
1 Installation sticker
2 Expansion Bolts
3 Mounting Screws
4 IP Camera top-cover housing
114.8mm
92.6mm
51mm

4.4 Run CAM Finder, Click “Search”, you will nd
the device IP, make sure default IP address is
192.168.0.250, and see as below picture.
4.8 WEB GUI After login, enter into below user interface
“Live View”, and also if you want more setting, you
can click the “Setup”.
4.9 Network Basic Settings:
Displays the current IP address, Subnet Mask, Default Gateway,
DNS, HTTP Port and MAC of the camera, see below picture 9.
4.10 System Maintenance Settings:
If you need update your camera default, you can choose Restart
Camera or Factory Default or Hardware Factory Default, see
below picture 10.
4.5 Default IP setting:
IP address: 192.168.0.250
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
User name: Admin
Password: 1234
4.6 Open IE Browser, type 192.168.0.250 (default IP
address) in the address bar, and then press the
Enter button.
4.7 You will be prompted with a pop-up window
asking for login information, type in “Admin”
(default login name) and “1234” (default
Picture 6 CAM Finder
Picture 8 WEB GUI Live view
Picture 7 enter WEB GUI pop-up window
Picture 5 Network structure
4. NETWORK OPERATION
4.1 Use correct power supply and need PC OS Windows 7.
4.2 After startup, connect the device with switch or router,
see below picture.
4.3 Go to install CAM Finder and you can nd your
camera.
5. SPECIFICATIONS
The Specications are subject to change without prior notice.
Model NDR153
Camera
Image sensor 1/2.8”2MP Sony STARVIS CMOS Progressive sensor
Minimum resolution 1920(H) x 1080(V)
Lens Vari-focal 2.8-1.2mm / Fixed Lens 3.6/2.8mm F1.4
IR Eective distance 20M (Smart IR)
Day and night Auto ICR
WDR Yes (DWDR)
Minimum Illumination Color 0.05 Lux/F2.0
B/W 0 Lux/F2.0
Electronic shutter speed Auto / Manual 1/3.75~1/10000
Gain control Auto / Manual
Backlightcompensation Yes
White balance mode Auto / Manual
Privacy Masking 1 area
Image setting Brightness, Contrast, Saturation, Sharpness, Mirror, Flip
Video
Video compression H.264 / M-JPEG
Video streaming Triple Streaming
H.264 Stream 1/ H.264 Stream2/ MJPEG Stream 3
Video resolution 1080P(1920X1080), SXVGA(1280X960),
720P(1280X720), XGA(1024X768), SVGA(800X600),
D1(720X480), VGA(640X480), 2CIF(704X240) ,
CIF(352X240)
Frame rate 1920X1080 @30fps, 1280X960 @30fps,
1280X720 @30fps 1024X768 @30fps,
800X600 @30fps, 720X480 @30fps
640X480 @30fps, 702X240 @30fps,
352X240 @30fps
Bit rate H.264:500K~8Mbps
Network
Interface 10/100 Mbps Ethernet, RJ-45
Supported protocols IPv4, IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP,
RTSP, RTP,SMTP, NTP,DHCP, FTP, Zero Congure
ONVIF Prole S,Q
Users Live viewing/Administrator for up to 10 clients
Browsers IE
Event Management
Event trigger Motion detection 5x5 areas / Tampering detection
Notications Send message via email or FTP, record JPG /AVI
General
Weight 380g
Dimension 114.8 X 92.6 mm
Operating temp. -20oC ~ 50oC
Humidity 10% ~ 90%RH (no condensation)
Certication CE/FCC class A
Weather proof None
Application SDK available for application development