DivioTec NDR554P User manual

H.265
IP CAMERA
Quick Installation Guide
NDR554P
(IR Outdoor Motorized Vandal Dome Camera)
Series V1.0
PRECAUTIONS
1. OPEN-CASE INSPECTION
2. PRODUCT STRUCTURE
3. EQUIPMENT INSTALLATION
●Do not use the camera in extreme temperature
conditions.
Please use the camera within -20oC to 50oC
Air vent is required at high temperature
●Donotuse orstore thecamerainhumidenvironment
It may cause poor image quality.
●Donotuse the camera inunstablelighting conditions.
Inconsistent lighting or ickering may cause poor image.
●Never use the camera close to gas or oil leak.
It may not operate properly.
●Do not disassemble the camera.
There is no user serviceable part inside.
●Do not drop the camera or apply force on it.
It may cause a malfunction.
●Never face the camera to strong light for long periods
of time.
It may damage the CMOS sensor.
1.1 Check step
When a user receives an IP camera, Please check the equipment
appearance without obvious damage. Product packaging use
protective material to deal with most accidental impact in the
transport process.
Please open the product outer packing,Check attachment provided
product is complete,See List 1 below accessories package for
inspection.
1.2 Standard accessories
Please make sure the item is consistent with the listing when
open the product outer packing,Detailed list please see the table
below,Actual conguration, please refer to specic products.
2.1 Cable function
2.2 Dimensions
REMARK: External power supply cannot be used with POE
simultaneously, or it will damage the camera.
When this camera is installed near wireless communication devices that
emit strong electromagnetic field, irregularity such as noise may appear in
the image.
Name Quantity
IP camera 1
Quick installation guide 1
Accessory pack 1
Description
: The bracket on the metope must be withstand at least 3X
the total weight of bracket and camera.
3.1 Use the Flat Head Screws 4Pcs xed Wall mount
bracket & Bracket
3.2
Put installation sticker on the surface (Wall or Ceiling)
where need to be installed.
3.3
Take outscrews ofbracketandputinto expansionbolts
to x bracket on the surface (Wall or Ceiling).
3.4 Remove base of camera and camera. Screw to fix the
base on the bracket.
3.5 Put camera back to x with base on the bracket.
3.6
Adjust direction of camera to watch a place where you
want to monitor.
NO. Name
1 Mounting Screws
2 Wall mount bracket(ACB-02) W1 kit
3 Expansion Bolts
4 Mounting Screws
5 Wall or Ceiling place
6 Installation Sticker
Metal Adapter Plate
3.7 Put desiccant and stick it on the internal black plastic
base.
Secure lock
Desiccant
Picture 1 Cable function
RJ45
DI/DO
Reset to
default button

4.4 Run IP Finder, Click “Search”, you will nd the
device IP, make sure default IP address is
192.168.0.250, and see as below picture.
4.8 WEB GUI After login, enter into below user interface
“Live View”, and also if you want more setting, you
can click the “Setup”.
4.9 Network Basic Settings:
Displays the current IP address, Subnet Mask, Default Gateway,
DNS, HTTP Port and MAC of the camera, see below picture 9.
4.10 System Maintenance Settings:
If you need update your camera default, you can choose Restart
Camera or Factory Default or Hardware Factory Default, see
below picture 10.
4.5 Default IP setting:
IP address: 192.168.0.250
User name: Admin
Password: 1234
4.6 Open IE Browser, type 192.168.0.250 (default IP
address) in the address bar, and then press the
Enter button.
4.7 You will be prompted with a pop-up window
asking for login information, type in “Admin”
(default login name) and “1234” (default
password), see below picture.
4. NETWORK OPERATION
4.1 Use correct power supply and need PC OSWindows 7.
4.2 After startup, connect the device with switchor router,
see below picture.
4.3 Go to install IP Finder and you can nd your camera.
Please get IP Finder software from sales.
3.8 Put cover back and use hex key wrench to secure 3
screws. Make sure all parts of camera are installed
securely.
Hex Key wrench