Dixix HC8000 User manual

X

1
Thank you for your purchase.
In order to make you more
comfortable by using the
product, please read this user
manual carefully and keep it
for future reference.
www.dixix.com

2
Power
cord
Blade
head
A/C
adaptor
Comb
adjusting
taper
On/Off
slide
switch
13mm
comb
16mm
comb
19mm
comb
22mm
comb
25mm
comb
3mm
comb
6mm
comb
9mm
comb
Comb stand
(optional)
Clipper
blade
Main body
Blade cover

3
This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance
by a person responsible for their
safety.
Children should be supervised to
ensure that they do not play with
the appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
The appliance is only to be
used with the power supply unit
provided with the appliance, it

4
must only be supplied at safety
extra low voltage corresponding to
the marking on the appliance.
Note:
n This product is not waterproof,
except the blades.
n Do not immerse the product
into water.
n Do not use the product
during bathing or showering.
n Do not use water to rinse the
product, expect the blades.
n The product cannot be cleaned
by dishwasher.
n Do not place the product in a
humidity area, ensure that the

5
skin is dry condition during use.
n The clipper blade is extremely
sharp, to prevent injuries, ensure
that the blade does not touch the
skin at all times during use.
n If the product or any other
part is damaged, do not re-use it.
Otherwise, it may cause harm to
human body.
n When the product is not used,
put on the blade cover. And keep
the product at safety place to
avoid dust buildup inside the
product.
n Make sure that the supply
voltage corresponds with the
voltage marked on the rating label
of the adaptor.

6
n During product cleaning,
ensure to turn off the power and
remove the A/C adaptor from
wall socket. Do not wrap the cord
around the appliance.
n Do not use the product at
wound or inflammatory area, and
allergic skin.
n Do not make any alteration to
the product, or give it to unofficial
professional people to do
maintenance.

7
Usage
1. Changing the blade head
 • The blades can be removed and detached from the
clipper by pressing at the rear of the blade head
forwards.
 • To reattach the blades, slide the blade head back onto
the clipper until it has reengaged with the clipper.
Note:
• During remove or reattach the blades, ensure the power
cord and power supply have been disconnected.
2. Adjustable taper level of blade
 • There are 6 different level blade adjustment from 0.8
to 3.8 mm, it can fine-tune to cut hair at different
length by adjusting the taper up and down. The taper
length can be altered whilst cutting.

8
3. Fitting the push-on combs
 • Eight colour push-on comb attachments allow for
cutting length adjustment, each colour represents a
different length of comb size from 3,6,9,13,16,19,22
and 25 mm respectively.
 • Make sure the clipper is turned off before attaching
or removing the combs (slide down the switch to " "
to power off the hair clipper).
 • Attach combs by aligning the teeth with the blade,
then clipping it back onto the bottom of the clipper
blade until hearing the "click" sound.
 • To remove the comb attachments, push the rear of
the comb up off the base of the blade.

9
4. Operation of clipper
 • Plug A/C adaptor into the wall socket and remove the
plastic blade cover.
 • Slide up the switch to " " in turning on the power of
the clipper for hair cutting.
 • After finishing the hair cutting, slide down the switch
to " " in turning off the power. Put back the blade
cover and unplug the power cord from the power
supply.
 • Clean the hair clipper (refer to cleaning and
maintenance section).

10
Note:
• Do not use the clipper for longer than 20 minutes
continuously as the blades may get hot.
• If the blades get hot, please stop to use it. Allow the
blades to get cool before next use, in order to keep
comfortable cutting practice.
• Keep the skin clean and tidy before using the product. Do
not smear cream, lotion, gel, powder or antiperspirant etc.
to avoid blocking of blade or malfunction.
• Please stop using the product if feeling uncomfortable
during use.

11
CleanandMaintenance
• It is essential to switch off the product, and remove
the adaptor from the wall socket before cleaning and
maintenance.
• To avoid the risk of electric shock, the product and the
adaptor must not be allowed to contact with liquid.
• Do not use compressed air, steel wire brush, abrasive
cleaning agent or corrosive liquid to clean the product.
• In order to keep comfortable cutting practice, do cleaning
and maintenance after using the product.
• Ensure a better cutting performance, do clean and
maintenance the product regularly.
• This product is not waterproof except the blades, please
do not use water to rinse the product.
• The clipper comb and blade shall be removed from the
product before cleaning.
1. Turn off the power, and remove blade cover.
2. Detach the clipper blade from the unit.
3. Use brush to clean the hair residues on the blades.

12
4. The detached blades can be washed under the tap or
water.
5. If finding hair residues on the blade, it is recommended
to change the taper up and down to remove it across
the blades.
6. Remove excess water after cleaning. Keep the blade to
be opened and let it dry completely.
7. After the blade is completely dry, install the blade back
to the main body. Put back the blade cover, and store
the product in a dry place.
Note:
• Do not use towel or paper towel to wipe the trimmer
blade, it may damage the blade and the connecting shaft.
• During the fitting or removing of blade head, ensure the
adaptor has been disconnected from wall socket.
• Do not use hairdryer or heater to dry the product, it
may make the product to be deformation and mechanical
failure.

13
• Do not place the product at sunlight or high temperature
directly.
Important:
n Blades must be cleaned and oiled on a regular basis for
proper functioning. Failure to regularly clean and oil the
blades will void the warranty.
Environmentalprotection
• In order to protect the environment, when the
product life time is end, do not waste the product
with other household rubbish. Put it into recycle
point instructed by the government.

14
Warranty
Defects affecting product functionality appearing within
the guarantee period will be corrected by replacement
or repair at our option, provided the product is used and
maintained in accordance with the instructions.
Warranty service provided at part or entire product repair
or replacement, it will be terminated up to the end of
warranty period.
Defects from repair by an unauthorized dealer are not
covered.
Guarantee period is 2 years from first retail purchase.
To get maintenance or repairing service, please bring the
product with purchased invoice, and contact local or closer
distributor or service station.
Professional Corded Hair Clipper
Model: HC8000
www.dixix.com
Manufacturer: DIXIX INTERNATIONAL LTD.

X
HC8000
PROFESSIONALCORDEDHAIRCLIPPER
C44-8000170220ARO004