Dixix HC966 User manual

X

1
Thank you for your purchase.
In order to make you more
comfortable by using the
product, please read this user
manual carefully and keep it
for future reference.
www.dixix.com

2
Connecting
plug
Adaptor
Short comb
Main body unit
Indicated light
Slide on/off switch
Clipper blade
Clipper head
Connecting jack
Blade cover
Medium combLong comb

3
This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance
by a person responsible for their
safety.
Children should be supervised to
ensure that they do not play with
the appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
The appliance is only to be
used with the power supply unit
provided with the appliance, it

4
must only be supplied at safety
extra low voltage corresponding to
the marking on the appliance.
- the battery must be removed
from the appliance before it is
scrapped;
- the appliance must be
disconnected from the supply
mains when removing the battery;
- the battery is to be disposed of
safely.
WARNING: For the purposes
of recharging the battery, only
use the detachable supply unit
provided with this appliance.

5
Note:
n Do not immerse the product
into water.
n Do not use the product
during bathing or showering.
n Do not use water to rinse the
product.
n The product cannot be cleaned
by dishwasher.
n Do not place the product in a
humidity area, ensure that the
skin is dry condition during use.
n The clipper blade is extremely
sharp, to prevent injuries, ensure
that the blade does not touch the
skin at all times during use.
n If the product or any other

6
part is damaged, do not re-use it.
Otherwise, it may cause harm to
human body.
n When the product is not used,
keep the product at safety place
to avoid dust buildup inside the
product.
n Make sure that the supply
voltage corresponds with the
voltage marked on the rating label
of the adaptor.
n During product cleaning,
ensure to turn off the power and
remover the adaptor. Do not wrap
the cord around the appliance.
n Do not use the product at
wound or inflammatory area, and
allergic skin.

7
n Do not make any alteration to
the product, or give it to unofficial
professional people to do
maintenance.

8
Charging process
1. Before using the product at the first time, the battery
must be fully charged, which will take about 14 hours.
2. With a fully charged battery, the product can be
operated for around 60 minutes. If you experience a
considerable decrease in trimming performance, switch
off the product and recharge the battery.
Firstly, slide down the "On/Off" switch button of the clipper
to turn off the power of the product. Insert the connecting
plug of the adaptor into the corresponding jack located
at the bottom of the product. Insert the adaptor into a
suitable wall socket.
• Once the charging process is completed, always remove
the adaptor from the wall socket first before disconnecting
the jack from the product.
• The transformer within the adaptor will become warm
while charging. This is normal and safety, and does not
indicate a malfunction of any kind.

9
• Insert the adaptor into a suitable wall socket. The
charging process begins automatically. The red charge
indicator at the lower side remains lit as long as the
product is connected to the mains.
• If the product has not been used for a long period, the
capacity of the battery may decrease by a certain amount.
However, full capacity will be restored after several charge/
discharge cycles.
Usage
1. Changing the clipper head
• The blade can be removed and detached from the
clipper by pressing out at the front of blade head.
• To reattach the blade, put back the blade head onto
the clipper, and press at the back of blade head until it
has reengaged.
Note:
To remove or reattach the blade, make sure to turn off the
clipper and the adaptor has been disconnected from wall
socket.

10
2. Fitting the push-on comb
• The product is provided with three kinds of comb
attachments, it allows to cut at different kinds of
length.
• The short comb is at 3mm, the medium comb is from
3 to 21mm, and the long comb is from 24 to 39 mm.
• There are two comb tracks, located at both sides of
the clipper, to fix the comb setting.
• Align both comb rails with comb track on both sides
of the clipper, and slide into place with "click" sound.

11
• To adjust comb height by press down on the comb
adjustment button and slide down as necessary.
• Remove the comb by pressing down on the comb
adjustment button and slide up.
Remark:
Please make sure the power of clipper is turned off during
comb adjustment.
3. Hair clipper operation
• Slide up the "On/Off" switch button to turn on the
power of the clipper for hair cutting.
• After finishing the hair cutting, slide down the switch
in turning off the power.

12
• Put back the blade cover and unplug the power cord
from the power supply.
• Clean the hair clipper (refer to cleaning and
maintenance section).
Note:
• Do not use the clipper for longer than 20 minutes
continuously as the blades may get hot.
• If the blades get hot, please stop to use it. Allow the
blades to get cool before next use, in order to keep
comfortable cutting practice.
• Keep the skin clean and tidy before using the product. Do
not smear cream, lotion, gel, powder or antiperspirant etc.
to avoid blocking of blade or malfunction.
• Please stop using the product if feeling uncomfortable
during use.

13
Clean and Maintenance
• It is essential to switch off the product, and remove
the adaptor from the wall socket before cleaning and
maintenance.
• To avoid the risk of electric shock, the product and the
adaptor must not be allowed to contact with liquid.
• Do not use compressed air, steel wire brush, abrasive
cleaning agent or corrosive liquid to clean the product.
• In order to keep comfortable cutting practice, do cleaning
and maintenance after using the product.
• Ensure a better cutting performance, do clean and
maintenance the product regularly.
• This product is not waterproof except the blade, please
do not use water to rinse the product.
• The clipper comb and blade cover shall be removed from
the product before cleaning.
1. Turn off the power, and remove blade cover.
2. Detach the clipper head from the main body.
3. Use brush to clean and remove the hair residues on the
blade.

14
4. The detached blade can be washed under the tap or
water.
5. Remove excess water after cleaning. Keep the blade to
be opened and let it dry completely.
6. After the blade is completely dry, install the blade back
to the main body and store the product in dry place.
Note:
• Do not use towel or paper towel to wipe the clipper
blade, it may damage the blade and the connecting shaft.
• During the fitting or removing of blade head, ensure the
adaptor has been disconnected from wall socket.
• Do not use hairdryer or heater to dry the product, it
may make the product to be deformation and mechanical
failure.
• Do not place the product at sunlight or high temperature
directly.

15
Important:
n Blade must be cleaned and oiled on a regular basis for
proper functioning. Failure to regularly clean and oil the
blade will void the warranty.
Environmental protection
• This product contains a rechargeable battery pack,
ensure to remove the battery before disposal, or put the
product into recycle point instructed by the government.
• In order to protect the environment, when the
product life time is end, do not waste the product
with other household rubbish. Put it into recycle
point instructed by the government.

16
Warranty
Defects affecting product functionality appearing within
the guarantee period will be corrected by replacement
or repair at our option, provided the product is used and
maintained in accordance with the instructions.
Warranty service provided at part or entire product repair
or replacement, it will be terminated up to the end of
warranty period.
Defects from repair by an unauthorized dealer are not
covered.
Guarantee period is 2 years from first retail purchase.
To get maintenance or repairing service, please bring the
product with purchased invoice, and contact local or closer
distributor or service station.
Contains a listed adaptor.
Hair Clipper
Model: HC966
www.dixix.com
Manufacturer: DIXIX INTERNATIONAL LTD.

X
HC966
HAIRCLIPPER
C44-0966170425ARO004