Dixon Automatic Tool SKC-PTA-B60 User manual

Automatic Industrial Cordless Brushless
Power Torque Screwdrivers Series
OPERATION AND MAINTENANCE MANUAL
SKC-PTA-B60
SKC-PTA-B35
SKC-PTA-B35F
SKC-PTA-B120
SKC-PTA-B90
SKC-PTA-B50F
CAUTION!!
SKC-PTA-B120/B90 SERIES IS ADVANCEMENT IN HIGH TORQUE MOTORS DESIGN.
TO BE MORE SAFTY, ASSEMBLE THE AUXILIARY HANDLE BEFORE OPERATION.
DIXON AUTOMATIC TOOL, INC.
www.dixonlighttools.com
Y2F111A-E-004


1
Before you use the Cordless Screwdriver for the first time, it is
essential to read and understand the manual completely (including the
spare parts view). The term “Cordless Screwdriver” in all of the
warning listed below refers to your main operatedappliance.
Icon Instructions
1. 2. 3. 4.
5. 6. 7. 8. 9.
1.Read instruction manual.
6. Do not operate in anexplosive
atmosphere.
2. Observe caution and safetynotes.
7. Do notdisassemble.
3. Recyclable.
8. Forbid to throw away.
4. For indoor useonly.
9. CE certification.
5. Do not expose to wet orrain
conditions.
Accessories
Item
Quantity
Unit
Manual
1
PCS
Guarantee Card
1
PCS
Torque Fixing Ring
1
PCS
Waist hook
1
PCS
Driver hook
1
PCS
ScrewM3*0.5P*10LT
1
PCS
Socket Extension
1
PCS
BIT
2
PCS
Slip resistant soft cover (Blue)
1
PCS
Slip resistant soft cover (Yellow)
1
PCS
Slip resistant soft cover(Red)
1
PCS


2
Warning
Read all instructions and make sure the appearance of the device has no damage before you use it.
Failure to follow all instructions listed below may result in electric shock fire and/or serious injury.
1. Keep the working area nice and clean.
1.1 Mess and dark areas may cause of accidents.
1.2 Keep the device away from rain or moisture to decrease the risk of electric shock or short-
circuiting occurred.
2. Be alert to workplace safety
2.1 Use the device under a well lit and clean environment.
2.2 Keep children and other people away unless the person has been assigned for the task to avoid
the danger of injury.
2.3 Do not play around while the tool is being used to avoid the danger of distractions.
2.4 Do not work with the device in potentially explosive environments in which there are
inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts
or fumes.
2.5 Do not use the device if you are tired or under the influence of drugs, alcohol or medication.
3. When the devices are not being used, store them in a safe place.
4. Use a suitable device for the job will be safer at work and have a betterresult.
5. Always use a screwdriver that is intended for the task you are undertaking. Do not overload or use
it improperly such as drilling or tapping.
6. Dress properly. Do not wear loose clothing or jewels while operating the tool to avoid the danger of
trapping.
7. Please hole the cordless screwdriver carefully before operating and avoid wrong operating method
8. When using the electrical power tool, take into account the auxiliary handle or waist hook is
advantage of working conditions. On the contrary, the purposes of the waist hook or driver hook is
convenient to put the device away and easier to keep it out of reach ofchildren.
9. Look after either the device or the battery carefully and have any damaged parts repaired by an
authorized or qualified shop. Always keep the tool nice and clean; pay attention on the machine
grease which might ruin the tool.
10. Disconnect the plug from the power source after the charger has been used.
11. Take apart the battery from the device when it is not beingused.
12. Use only the accessories that are detailed in the operating instructions. The use of others which are
not recommended in the operating instructions may affect the functioning of the device. It could
lead to an increased risk of personal injury as well.
13. Remain alert at all times and watch what you are doing during proceeding. Before operation,
always check every part is in good condition and move freely in order to function properly.
14. This device only applies for metal screw bits designated with their dimensions and their shape. Do
not recommend to countersink or force of loading on any material such as plastic and wooden.
15. The device does not apply for elastic or tensile load with washeron.


3
16. To prevent parts in gearbox from damage, replace the grease at least once for everyyear.
17. It is necessary for the operators to read and follow up all the operating instructions in this manual.
KILEWS is not responsible for any personal injury that might cause of disobeying the safety
advices.
Functionofcordlessprotection
▉Over electric current protection
▉Prevent from low power
▉Thermal Protector ▉Stall protection
▉Slow rotation protection ▉Reverse control protection
▉Battery Identification
▉Sleeping mode
Warning
Do not attempt to repair or disassemble this cordless screwdriver, the warranty will be
considered void.
1. This rechargeable screwdriver maintenance Make sure to remove the battery pack before maintaining
or repairing the device by a qualified technician.
2. Do not attempt to disassemble or reassemble the device at will which may result in poor performance
or danger of injury, the warranty applies only to initial package.
3. Do not repair the device with other than genuine KILEWS replacement parts may result in poor
performance or danger of injury, the warranty will be consideredvoid.
4. The temperature between 0∘C ~ 35∘C would be an ideal condition of carrying out the tasks on the
device.
Operating instructions
1. Charge the battery in the charging station before first use to make sure operates at its highest capacity.
To ensure operators against injuries, release the Forward/Reverse lever as arrow showing below into
a center position to have trigger locked before start or disassemble the device.
Forward / Reverse


4
2.1 Below illustration is showing the process of correct install & disassemble the rechargeable battery.
The beep sound comes along with a flash while the screwdriver is supplied genuine battery
installation. It could be operated once the battery has been identified.
2.2 Too slow to install the battery may cause error identification so the beep sound and flash would be
continuing. In order to function properly, re-assembling it as below processagain.
Insert Battery Steps
(1) Insert the rechargeable battery into the device follow by the arrow asshowing.
(2) Assembled completely.
Remove Battery Steps
Battery
Release Button
(1) Press the release button and (2) Follow the arrow direction. (3) Removed completely.
take it out of the device


5
Function / Operating Introduction
(4) (5) (9)
(6)
(10) (3) (2)
(8)
(1)
(11)
(7)
Function Name Table
No. Description No. Description
(1) Trigger Switch (7) S waist hook
(2) Forward/Reverse Lever (8) Indication light
(3) LED Light (9) Torque Adjustment Ring
(4) Bit Sleeve (10) Speed adjustment
(5) Torque Fixing Ring (11) Wrist strap hole
(6)
Driver Hook Hole


6
1. Full auto shut-off screwdriver:
Manual/Function
It stops automatically when the screw has been tightened up and reached the set-up torque level. The
device will not cause damage of task since no continue running after screws are tightened.
(1) Trigger switch:
The LED lights on when the trigger switch has been pressed about one-third down, and then the
screwdriver starts functioning when the switch trigger has been pressed half way down; on the
contrary, it stops when the screw has been tightened up or the trigger has been released.
(2) Forward / Reverse switch:
When the switch turn to the right as arrow indicates, the screwdriver will be clock-wise screwing to
tighten things up; Vice versa, left switch means to release the screw. As the diagram showing, always
set the switch to neutral position when the screwdriver is not beingused.
(3) LED light:
Forward (screw) Reverse(unscrew)
While press the trigger, the LED lights up automatically to assist the job to be done; on the contrary,
it will be off once the trigger has been released.
(4) Bit Sleeve:
Switch the screw bit and compatibility, pull the head of the type B screwdriver, and install the bit
according to the diagram below, after installing the bit please also install the W type cap and push it
in following the arrow indicated on the diagram below ondiagram #2.
Pull the bit holder
Insert the bit into
Diagram 1
insert adaptor
follow by
socket
Diagram 2


7
(5) Torque Fixing Ring/Coupler:
1).Torque Fixing Ring: To prevent torque to be adjusted, fixed upside-underside housing and clutch.
2).Coupler: Fixed upside-underside housing and clutch.
(6) Driver Hook:
It is convenient that the production lines are able to have spring balancers work together with the tools to
be more efficiently.
(7) Waist hook:
The waist hook allows users to carry the device easily by attaching it to their work belt.
(8) Functional lightand the statusindicator:
Whenever the remaining power in the rechargeable battery is fewer than 20%, the tool is still alive but
with red flash lights on. Once the remaining power is towards 10% or even fewer it may result in poor
performance with the continuing red lights on.
LED and Buzzer Reached adjustment torque NG
LED Display Green light on-off Red light on-off
Buzzer 1 short alarm 1 long alarm
Low Battery LED
Display & Buzzer
Capacity 20%↓(17.5V) Capacity 10%↓(17V)
LED Display Red light flicks Red light turn on(Out of battery)
Buzzer Non-stop B Short Buzzer 2 Short & 1 Long Buzzer
Screwdriver Action Rotating No Action
(9) Torque Adjustment Ring :
Turn torque adjust ring counter clock wise to increase torque output, on the other hand decrease torque
output by turning torque adjust ring clock wise. 0 printed on the torque adjust ring indicates the minimum
torque for setting and 8 for the maximum torque setting. Do not turn torque adjust ring lower than 0 or
higher than 8 to avoid torque adjust ring getting stuck with clutch.
COUPLER
Torque Fixing Ring


8
(10) Hi/Lo Switch: When the rotating speed needs to be changed, set up the switch to Hi for the fastest
rotation, and set up the switch to Lo for slowest rotation. It's possible that the uncompleted shut-off
occurs when the switch is setup to Lo and the presetting torque is more than 50% of torque range. Please
refer to the following table.
LO 扭力跳脫 PTA-B120 PTA-B90 PTA-B50F PTA-B60 PTA-B35 PTA-B35F
正常跳脫 7.8N m↓ 5.9N m↓ 3.3N m↓ 3.9N m↓ 2.3N m↓ 2.3N m↓
產生異常跳脫 7.8N m↑ 5.9N m↑ 3.3N m↑ 3.9N m↑ 2.3N m↑ 2.3N m↑
(11) Holeforwrist band
Enable to install the wrist band which is more convenient and safer forusers.
(12) Holeforwrist band
Prevent slip and help user grip the screwdriver
Torque setting identification. Three colors: blue, yellow, and red can help identify different torque setting
by the users.
2. Auxiliary handle
For easier use of the screwdriver, there is a handle for assistingpurpose.
Warning, this power screwdriver delivers high torque, please install the handle
beforedoingworkinordertoavoiddanger. Wearenotresponsibleforanydamage
or injury caused byusing this product without handle.
(1) Installing the base (2) Installing the handle (3) Complete
Other Cautions
1. The best condition of using the tool is under 8 hours a day, do not over loaded.
2. Do not attempt to repair or disassemble this cordless screwdriver without authorization. Always have
the device serviced by assigned factory or qualified person in order to have the warranty effective
continually.
3. KILEWS is not responsible for any poor performance or damage caused by customers own
modification of the tool.
4. It is necessary for the management to have individual operators read and follow up all instructions in
this manual. Do not attempt to repair or disassemble this cordless screwdriver themselves.


9
5. Chemicals, Acetone, Benzene, Alcohol, Thinner, Ketone, trichloroethylene, etc shall not be in contact
with the surface of the screwdriver in order to prevent chemicaldamage.
6. Please follow instruction carefully and do not drop or shock the screwdriver.
7. This is an external torque adjustment screwdriver, 0 on the torque adjust ring stands for minimum
torque and 8 for maximum torque. The rated operation time is 1 second / 3 seconds (ON / OFF).
Appropriate fastening frequency is 15 fasteners in each minute. Overrunning may damage motor due
to overheat. Proper amount of screwdriver resting is recommended to prevent motor overheating.
8. Not allow to turn the Hi/Lo switch during operation in order to cause system malt-function.
9. The device will not be able to function again once the OK/NG indicator/signal is not turn off yet.
10. When adjusting the torque, for safety purpose should stop the screwdriver completely and set the
switch to neutral position. It could prevent the user from turning the tool on accidentally.
11. During operation, the switch has been changed accidentally that the device will enable its self-
protecting mode which is power off. Re-start the tool when this happen.
12. Each operational torque setting, using time and frequency may result in different level of wear and
tear, at higher torque setting and use extensively could accelerate the wearing down of tool. After one
month, the torque is getting reduce gradually at the rate of 2~3% or 3~5 %( max torque). The longer
use of the device, torque reduction will become stable and the users could measure the torque by a
tester on a regular time schedule to check if the torque power still meets the criteria.
13. SKC-PTA-B60/35/35F are tested by our torque meter KTM-CSH.
14. Kilews cordless screwdriver torque output is generated by clutch machnisam, and it is applicable to
ISO 6789.
Description of Battery and Charger
1. KILEWS SKC-LB1820B series of batteries as options to fit in the device; you may consult with local
agent based on your task requirement.
2. The use of other than genuine KILEWS batteries or screwdrivers can’t be active due to the build-in
protection system enforce no charging.
3. Recommended to use SKC-P80W-D


10
Specifications
MODEL PTA-B120 PTA-B90 PTA-B50F PTA-B60 PTA-B35 PTA-B35F
INPUT VOLTAGE(DC) DC 18V
TORQUE (N.m) 6~12 3~9 2~5 2~6 1~3.5 1~3.5
Torque accuracy (%) Torque accuracy (%)
Torque adjustment Torque adjustment
Unloaded
Speed n0
(r/min)±10%
HI 880 1000 2200 1000 1000 2000
LO 570 650 1400 650 650 1300
Screw size (mm) Machine
screw ≤6 5.0~6.0 4.0~5.0 4.0~5.0 4.0~5.0 4.0~5.0
Weight (Kg)
0.79kg (w/obattery
）
Length (mm)
217mm
＊
169mm
（L＊H w/o battery ）
Applicable auxiliary handle C15001-2
Applicable battery SKP-LB1820B
Applicable charger station SKC-P80W-D
Applicable Bit type
Bits :square B: Hex 6.35mm
Accessory ~ Bit no.：NO.3# Apply to 3.0~4.0mm
CAUTION
SAVE THE INSTRUCTIONS
DO NOT DESTROY