djV DF-V9C User manual

Fog machine
Fog machine
DF-
V9C
Users Manual
V9C

Fog machine DF-
V9C Art.No
Table of content
1. Safety instructions
................................
1.1.
For safe and efficient o eration
2.
Intended use of the device
2.1.
Overhead installation
2.2.
Electrical connections
3. Introduction
................................
3.1. Item delivered
................................
3.2.
Product descri tion
4. Start-u
................................
4.1. O eration
................................
4.1.1.
Wired Remote
4.1.2.
Wireless Remote
5. Technical data
................................
V9C Art.No
.: 105693
2 / 12
................................
................................
...............................
For safe and efficient o eration
................................
................................
Intended use of the device
................................
................................
Overhead installation
................................
................................
Electrical connections
................................
................................
................................
................................
................................
................................
................................
................................
Product descri tion
................................
................................
................................
................................
................................
................................
................................
................................
Wired Remote
................................................................
...........................
Wireless Remote
................................
................................
................................
................................
................................
...............................
3
................................
... 3
................................
.............. 4
................................
..................... 5
................................
................... 6
................................
......... 7
................................
. 7
................................
........................ 7
................................
................ 8
................................
......... 8
...........................
8
................................
....................... 9
................................
. 10

Fog machine DF-
V9C Art.No
1.
Safety instructions
•
This device is suitable for indoor use (not outdoors) only.
•
Unauthorized modifications will invalidate the warranty.
•
Re airs are to carry out by skilled workers only.
•
Use only fuses of the same ty e and original arts as s are arts.
•To avoid fire and
electric shocks rotect the unit from rain and humidity.
1.1.
For safe and efficient operation
Be careful with heat and extreme temperatures
Do not lace the device in a location where it is ex osed to extreme
tem eratures.
O erate the device only in an amb
40°C (104°F). Do not ex ose the device to direct sunlight or heat sources.
Keep away from humidity, water and dust
Avoid lacing the device in a location with high humidity or excessive
dust.
Place no liquids on or n
Place the device on a firm ground
To avoid vibrations always lace the device on a firm ground.
Do not use chemicals for cleaning
Use a clean and dry cleaning rag to remove dust. Metal arts can be
cleaned with a dam ed cleaning rag. Be
device from the ower su ly.
If the device is not working properly
If roblems occur un lug the device from the ower su ly. The user should
not try to service the device inde endently. All re airs and service must be
e
rformed by a qualified technician.
Take proper care with the power cord
Never ull the ower cord to disconnect the device from the ower
su ly, but remove the lug with lug housing in the hand. If you do not
use the device for an extended eriod,
su ly.
ATTENTION
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not acce t liability for any consequent secondary
failures. Only skilled workers are allowed to carry out t
connections. All electrical and mechanical connections have to be carried
out according to the Euro ean safety standards.
V9C Art.No
.: 105693
3 / 12
Safety instructions
This device is suitable for indoor use (not outdoors) only.
Unauthorized modifications will invalidate the warranty.
Re airs are to carry out by skilled workers only.
Use only fuses of the same ty e and original arts as s are arts.
electric shocks rotect the unit from rain and humidity.
For safe and efficient operation
Be careful with heat and extreme temperatures
Do not lace the device in a location where it is ex osed to extreme
O erate the device only in an amb
ient tem erature between 0°C (32°F)
40°C (104°F). Do not ex ose the device to direct sunlight or heat sources.
Keep away from humidity, water and dust
Avoid lacing the device in a location with high humidity or excessive
Place no liquids on or n
ear the system.
Place the device on a firm ground
To avoid vibrations always lace the device on a firm ground.
Do not use chemicals for cleaning
Use a clean and dry cleaning rag to remove dust. Metal arts can be
cleaned with a dam ed cleaning rag. Be
fore cleaning always un lug the
device from the ower su ly.
If the device is not working properly
If roblems occur un lug the device from the ower su ly. The user should
not try to service the device inde endently. All re airs and service must be
rformed by a qualified technician.
Take proper care with the power cord
Never ull the ower cord to disconnect the device from the ower
su ly, but remove the lug with lug housing in the hand. If you do not
use the device for an extended eriod,
un lug the device from the ower
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not acce t liability for any consequent secondary
failures. Only skilled workers are allowed to carry out t
he electrical
connections. All electrical and mechanical connections have to be carried
out according to the Euro ean safety standards.
This device is suitable for indoor use (not outdoors) only.
Unauthorized modifications will invalidate the warranty.
Use only fuses of the same ty e and original arts as s are arts.
electric shocks rotect the unit from rain and humidity.
Do not lace the device in a location where it is ex osed to extreme
ient tem erature between 0°C (32°F)
-
40°C (104°F). Do not ex ose the device to direct sunlight or heat sources.
Avoid lacing the device in a location with high humidity or excessive
To avoid vibrations always lace the device on a firm ground.
Use a clean and dry cleaning rag to remove dust. Metal arts can be
fore cleaning always un lug the
If roblems occur un lug the device from the ower su ly. The user should
not try to service the device inde endently. All re airs and service must be
Never ull the ower cord to disconnect the device from the ower
su ly, but remove the lug with lug housing in the hand. If you do not
un lug the device from the ower
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not acce t liability for any consequent secondary
he electrical
connections. All electrical and mechanical connections have to be carried

Fog machine DF-
V9C Art.No
2.
Intended use of the device
This device was develo ed for rofessional use on stages, in discos, theatres
etc. The de
vice is only a roved for a connection u to 230 V 50/60 Hz
alternating current and only for indoor use.
Regular breaks during o eration increase the lifetime of your device.
Avoid convulsions or any form of forceful im act during the installation or the
start u of the device.
Take care that no cables are lying around. You would endanger your own
safety and also the safety of a third arty.
It is not allowed to o erate or st
s ray water or rain is ex ected. Humidity or very high atmos heric humidity
could reduce the isolation of the device and could cause deathly electric
shocks.
If using fog machine you have to ensure that the fog
must allow a good visibility of at least 10m.
O erate the device not during thunderstorms. Surge voltages could destroy
the device. Un lug the ower su ly during thunderstorms.
Surrounding objects or surfaces should not be in conta
Make sure that during the installation and removal of the device the area
below the lace of installation is basically cordoned off. This also a lies to
im lementation of service.
Make familiar yourself with the functions of the devi
without the ex erience should not handle with the device. The most cause of
functional disorder is ina ro riate handling.
Kee the device away from children and never o erate it unattended.
Never aim the nozzle on eo le a kee
ATTENTION. The ejected fog is very hot!
Kee a minimum distance of 50 cm to other objects.
Use only the recommended, high quality water
Other fluids may cause damages. Do not use flammab
oil, gas, erfumes, etc. in your fluid.
Never aim the nozzle on o en fire or flammable objects.
Make sure to to off the fluid in time. If the machine o erated without fluid it
can cause damages to the um or the heating block. B
fluid lease un lug the device from the ower su ly.
Never drink the fluid. I fit does ha en, lease contact a doctor. If the fluid
had contact with the eyes or mucous membranes, rinse immediately with
water bodies.
O erate the unit o
nly in a horizontal osition.
V9C Art.No
.: 105693
4 / 12
Intended use of the device
This device was develo ed for rofessional use on stages, in discos, theatres
vice is only a roved for a connection u to 230 V 50/60 Hz
alternating current and only for indoor use.
Regular breaks during o eration increase the lifetime of your device.
Avoid convulsions or any form of forceful im act during the installation or the
Take care that no cables are lying around. You would endanger your own
safety and also the safety of a third arty.
It is not allowed to o erate or st
ore the device in an environment in which
s ray water or rain is ex ected. Humidity or very high atmos heric humidity
could reduce the isolation of the device and could cause deathly electric
If using fog machine you have to ensure that the fog
saturation of the room
must allow a good visibility of at least 10m.
O erate the device not during thunderstorms. Surge voltages could destroy
the device. Un lug the ower su ly during thunderstorms.
Surrounding objects or surfaces should not be in conta
ct with the device.
Make sure that during the installation and removal of the device the area
below the lace of installation is basically cordoned off. This also a lies to
im lementation of service.
Make familiar yourself with the functions of the devi
ce before start
without the ex erience should not handle with the device. The most cause of
functional disorder is ina ro riate handling.
Kee the device away from children and never o erate it unattended.
Never aim the nozzle on eo le a kee
a distance from 50 cm to the nozzle.
ATTENTION. The ejected fog is very hot!
Kee a minimum distance of 50 cm to other objects.
Use only the recommended, high quality water
-
based fluid from your dealer.
Other fluids may cause damages. Do not use flammab
le additives, such as
oil, gas, erfumes, etc. in your fluid.
Never aim the nozzle on o en fire or flammable objects.
Make sure to to off the fluid in time. If the machine o erated without fluid it
can cause damages to the um or the heating block. B
efore to off the
fluid lease un lug the device from the ower su ly.
Never drink the fluid. I fit does ha en, lease contact a doctor. If the fluid
had contact with the eyes or mucous membranes, rinse immediately with
nly in a horizontal osition.
This device was develo ed for rofessional use on stages, in discos, theatres
vice is only a roved for a connection u to 230 V 50/60 Hz
Regular breaks during o eration increase the lifetime of your device.
Avoid convulsions or any form of forceful im act during the installation or the
Take care that no cables are lying around. You would endanger your own
ore the device in an environment in which
s ray water or rain is ex ected. Humidity or very high atmos heric humidity
could reduce the isolation of the device and could cause deathly electric
saturation of the room
O erate the device not during thunderstorms. Surge voltages could destroy
ct with the device.
Make sure that during the installation and removal of the device the area
below the lace of installation is basically cordoned off. This also a lies to
ce before start
-u . Peo le
without the ex erience should not handle with the device. The most cause of
Kee the device away from children and never o erate it unattended.
a distance from 50 cm to the nozzle.
based fluid from your dealer.
le additives, such as
Make sure to to off the fluid in time. If the machine o erated without fluid it
efore to off the
Never drink the fluid. I fit does ha en, lease contact a doctor. If the fluid
had contact with the eyes or mucous membranes, rinse immediately with

Fog machine DF-
V9C Art.No
Never use solvents or aggressive detergents for cleaning. Use instead of this a
dam ed cleaning rag.
To revent damages during trans ort use for trans ort the original acking or
rovided accessories.
For reasons of safety u
nauthorized changes are forbidden
A usage of the device which differs from usages which are described in this
manual can cause damages of the device. In this case the warranty ex ires.
Additional you should notice that every different usage is related wi
dangers and can cause e.g. an electrical short, fire, electric shock or crash.
2.1.
Overhead installation
Danger of life
You have to observe the regulations of BGV C1 (formerly VBG
70) and EN60598
personnel only.
The sus ension devices have to be build and measured so they can
withstand for an hour the tenfold of the ayload without suffering a
ermanent detrimental deformation.
Basically installation has to be made by using a second se arate sus e
This can be e.g. a suitable net. The second sus ension must be designed and
attached so no art of the installation can fall down in case of failure.
During construction, reconstruction and deconstruction unnecessary stay in
the range of moving area
or any other danger zones is forbidden.
The o erator is obliged to following safety
•
Before the first start
to be
checked by an ex ert.
•
Review in the frame of the ins ection test at least all four years by an
ex ert. .
•
Review by a qualified erson at least once a year.
How to carry out the overhead installation:
Ideally the device should be installed outside lounge
IMPORTANT
Overhead installation requires a high level of ex erience. This
includes knowledge of calculating the ayload, used installation material
and safety ins ections of the used material and the rojector whereas the
required ex eri
ence is not limited to this. Do not try to carry out installation
yourself under any circumstances if you are not qualified. Contact a
rofessional installer. An ina ro riate installation can lead to injuries and/or
damaged ro erties.
V9C Art.No
.: 105693
5 / 12
Never use solvents or aggressive detergents for cleaning. Use instead of this a
To revent damages during trans ort use for trans ort the original acking or
nauthorized changes are forbidden
A usage of the device which differs from usages which are described in this
manual can cause damages of the device. In this case the warranty ex ires.
Additional you should notice that every different usage is related wi
dangers and can cause e.g. an electrical short, fire, electric shock or crash.
Overhead installation
Danger of life
You have to observe the regulations of BGV C1 (formerly VBG
70) and EN60598
-2-17
Installations are to carry out by skilled
personnel only.
The sus ension devices have to be build and measured so they can
withstand for an hour the tenfold of the ayload without suffering a
ermanent detrimental deformation.
Basically installation has to be made by using a second se arate sus e
This can be e.g. a suitable net. The second sus ension must be designed and
attached so no art of the installation can fall down in case of failure.
During construction, reconstruction and deconstruction unnecessary stay in
the range of moving area
s, on lightning bridges, under elevated work stations
or any other danger zones is forbidden.
The o erator is obliged to following safety
-
related and mechanical facilities:
Before the first start
-
u or after critical changes before restarting it has
checked by an ex ert.
Review in the frame of the ins ection test at least all four years by an
Review by a qualified erson at least once a year.
How to carry out the overhead installation:
Ideally the device should be installed outside lounge
areas of eo le.
Overhead installation requires a high level of ex erience. This
includes knowledge of calculating the ayload, used installation material
and safety ins ections of the used material and the rojector whereas the
ence is not limited to this. Do not try to carry out installation
yourself under any circumstances if you are not qualified. Contact a
rofessional installer. An ina ro riate installation can lead to injuries and/or
Never use solvents or aggressive detergents for cleaning. Use instead of this a
To revent damages during trans ort use for trans ort the original acking or
A usage of the device which differs from usages which are described in this
manual can cause damages of the device. In this case the warranty ex ires.
Additional you should notice that every different usage is related wi
th
dangers and can cause e.g. an electrical short, fire, electric shock or crash.
You have to observe the regulations of BGV C1 (formerly VBG
Installations are to carry out by skilled
The sus ension devices have to be build and measured so they can
withstand for an hour the tenfold of the ayload without suffering a
Basically installation has to be made by using a second se arate sus e
nsion.
This can be e.g. a suitable net. The second sus ension must be designed and
attached so no art of the installation can fall down in case of failure.
During construction, reconstruction and deconstruction unnecessary stay in
s, on lightning bridges, under elevated work stations
related and mechanical facilities:
u or after critical changes before restarting it has
Review in the frame of the ins ection test at least all four years by an
areas of eo le.
Overhead installation requires a high level of ex erience. This
includes knowledge of calculating the ayload, used installation material
and safety ins ections of the used material and the rojector whereas the
ence is not limited to this. Do not try to carry out installation
yourself under any circumstances if you are not qualified. Contact a
rofessional installer. An ina ro riate installation can lead to injuries and/or

Fog machine DF-
V9C Art.No
It is not allowed t
o install the device in the gri area of eo le.
If the device may hang from the ceiling or from high beams, the use of truss
systems is mandatory. The device may not be installed so it can swing freely in
the room.
Please note: Crashing down items can
rojector, if you doubt the safety of a ossible installation form!
Before installation make sure that the mounting surface has the ability to carry
the tenfold oint load of the own weight of the device.
Mount th
e device with the mounting
a ro riate clam .
During overhead installation the device must be always secured by a safety
ro e which is designed to hold the twelvefold weight of device. Only safety
ro es with quick-r
elease safety fastener elements may be used. Hang u the
safety ro e in the hole of the mounting bracket. Direct the ro e over the truss
or an a ro riate fastening oint. Hang u the end in the fastening element
and tie u the locking nut. A safety ro e o
damaged may not be used furthermore.
The maximum drop exceed must not exceed 20cm.
A safety ro e once ex osed to failing load or damaged may not be used
furthermore.
Adjust the desired inclination angle via the mounting brack
and tighten the screw.
2.2.
Electrical connections
Connect the fixture to the mains with the enclosed ower cable and lug.
The earth has to be connected.
Cable (EU)
Cable (US)
Brown
Black
Light blue
White
Yellow/Green
Green
V9C Art.No
.: 105693
6 / 12
o install the device in the gri area of eo le.
If the device may hang from the ceiling or from high beams, the use of truss
systems is mandatory. The device may not be installed so it can swing freely in
Please note: Crashing down items can
cause serious injuries! Do not install the
rojector, if you doubt the safety of a ossible installation form!
Before installation make sure that the mounting surface has the ability to carry
the tenfold oint load of the own weight of the device.
e device with the mounting
-
bracket to your trussing system using an
During overhead installation the device must be always secured by a safety
ro e which is designed to hold the twelvefold weight of device. Only safety
elease safety fastener elements may be used. Hang u the
safety ro e in the hole of the mounting bracket. Direct the ro e over the truss
or an a ro riate fastening oint. Hang u the end in the fastening element
and tie u the locking nut. A safety ro e o
nce ex osed to failing load or
damaged may not be used furthermore.
The maximum drop exceed must not exceed 20cm.
A safety ro e once ex osed to failing load or damaged may not be used
Adjust the desired inclination angle via the mounting brack
Electrical connections
Connect the fixture to the mains with the enclosed ower cable and lug.
The earth has to be connected.
Cable (US)
Pin
International
Black
Live L
White
Neutral N
Green
Earth
o install the device in the gri area of eo le.
If the device may hang from the ceiling or from high beams, the use of truss
systems is mandatory. The device may not be installed so it can swing freely in
cause serious injuries! Do not install the
rojector, if you doubt the safety of a ossible installation form!
Before installation make sure that the mounting surface has the ability to carry
bracket to your trussing system using an
During overhead installation the device must be always secured by a safety
ro e which is designed to hold the twelvefold weight of device. Only safety
elease safety fastener elements may be used. Hang u the
safety ro e in the hole of the mounting bracket. Direct the ro e over the truss
or an a ro riate fastening oint. Hang u the end in the fastening element
nce ex osed to failing load or
A safety ro e once ex osed to failing load or damaged may not be used
Adjust the desired inclination angle via the mounting brack
et
Connect the fixture to the mains with the enclosed ower cable and lug.
International

Fog machine DF-
V9C Art.No
3. Introduction
Thank you for choosing a device from DJPower. Before usage lease read this
manual carefully.
3.1.Item delivered
-1x Fog machine
DF
-1x
Power cord (fixed)
-1x Remote M-1
wired
-1x Remote W-2
-1x Receiver KT-1
-
Manual (German / English)
3.2.P
roduct description
V9C Art.No
.: 105693
7 / 12
Thank you for choosing a device from DJPower. Before usage lease read this
DF
-V9C
Power cord (fixed)
wired
(3,5m)
Manual (German / English)
roduct description
1. B
racket
2. Tank
3.
Safety eye
4.
Locking screw
5.
Nozzle
6.
Manual INPUT
7.
LED „No Liquid“
8.
Oil level indicate
Remote
INPUT
9.
Power INPUT
Thank you for choosing a device from DJPower. Before usage lease read this
racket
Safety eye
Locking screw
Nozzle
Manual INPUT
LED „No Liquid“
Oil level indicate
Remote
Wireless
Power INPUT

Fog machine DF-
V9C Art.No
4. Start-up
Attention!
Remove before start-
u every acking material.
1.
Fill the tank with fluid. Make sure that there is always enough fluid in the
tank.
2.
Connect the device to the ower su ly.
3.
The device starts to heat u .
on the receiver lights red.
4.
The heating rocess is finished. The LED on the remote or the
lights green.
4.1.Operation
The o eration can be made by the wired or the wireless remote.
4.1.1.
Wired Remote
Connect the wired remote with the
Controller”.
1. LED
2. Fog button
V9C Art.No
.: 105693
8 / 12
u every acking material.
Fill the tank with fluid. Make sure that there is always enough fluid in the
Connect the device to the ower su ly.
The device starts to heat u .
This rocess needs 4,5
min, while the LED
on the receiver lights red.
The heating rocess is finished. The LED on the remote or the
The o eration can be made by the wired or the wireless remote.
Wired Remote
Connect the wired remote with the
device by using the
INPUT “Manual
This LED lights green if the device is heated u
and ready to use.
This button activates the fog out ut.
Fill the tank with fluid. Make sure that there is always enough fluid in the
min, while the LED
The heating rocess is finished. The LED on the remote or the
receiver
The o eration can be made by the wired or the wireless remote.
INPUT “Manual
This LED lights green if the device is heated u
This button activates the fog out ut.

Fog machine DF-
V9C Art.No
4.1.2.
Wireless Remote
Connect the receiver
with the device by using the
If you want to use several devices you can assign u to 4 devices to one
remote, by using the r
eceiver
1. LED
2. Di switches
3. LED
2. Fog button 1- 4
V9C Art.No
.: 105693
9 / 12
Wireless Remote
with the device by using the
INPUT “Wireless Controller“.
If you want to use several devices you can assign u to 4 devices to one
eceiver
s.
This LED lights green if the device is heated u
and ready to use.
You can assign the receiver to
different buttons
or channels of the remote.
CH1 (Di switch 1:
On; Di switch 2 -
4: Off); CH2 (Di switch 2: On,
Di switch 1, 3 –
4: Off); CH3 (Di switch 3: On,
Di switch 1 –
2,4: Off); CH4 (Di switch 4: On,
Di switch 1- 3: Off).
This LED lights red
while the device is heating
u .
With the buttons CH1 – CH4
you can activate
the fog out ut. Before this you have to assign
the receivers to the different buttons.
INPUT “Wireless Controller“.
If you want to use several devices you can assign u to 4 devices to one
This LED lights green if the device is heated u
different buttons
CH1 (Di switch 1:
4: Off); CH2 (Di switch 2: On,
4: Off); CH3 (Di switch 3: On,
2,4: Off); CH4 (Di switch 4: On,
while the device is heating
you can activate
the fog out ut. Before this you have to assign
the receivers to the different buttons.

Fog machine DF-
V9C Art.No
5. Technical data
Voltage
Power consumption
max.
Fuse
Heating power
Heating time
Tank volume
Output volume
Fluid consumption
@100%
Remote
Frequency of the remote
Power in
Dimensions
Weight
V9C Art.No
.: 105693
10 / 12
AC 220 V –
240 V; 50/60 Hz
max.
722 W
5 A/250 V
700 W
4,4 min
1,3 Liter
181 m³/min
@100%
33 ml/min
Yes (Wired and W
ireless)
433 MHz
Schutzko
249 x 249 x 175 mm
3,6 kg
240 V; 50/60 Hz
ireless)