
DMI Sports For Customer Service Call 1.800.399.4402
To assemble each arched leg, secure Left Leg (P5) to the Right Leg (P4) with Upper Stretcher (P6) and
Lower Stretcher (P7) by screwing 1/4” Bolts (H6) and 1/4” Washer (H7) into Threaded Insert Nuts (H8) as
shown below. Note: (P7) has a slight curve along the outer edge and is intended to be the bottom sup-
port. Do not tighten until you have inserted the curved Leg Panel (P2). Once the Leg Panel has been
positioned in place, tighten bolts and washers fi rmly.
Secure each Leg Base (P8) with F4 Screws (H5). Be sure to secure these Leg bases evenly on both sides of
arched leg structure for best appearance.
Screw in Leg Levelers (P9).
DMI Sports For Customer Service Call 1.800.399.4402-5-DMI Sports For Customer Service Call 1.800.399.4402
NOTE: Please leave Main Frame (P1) face down in the carton that it ships in until the legs are attached.
All images are shown up-side-down until the table is turned up on its legs.
When attaching Leg Base, make sure
When attaching Leg Base, make sure
Leg Leveler (P9) will thread completely
Leg Leveler (P9) will thread completely
through Leg base and slot in leg.
through Leg base and slot in leg.