Dogtra PATHFINDER SE KIT Installation and operation manual

Web Manual
PATHFINDER SE KIT

1
PATHFINDER SE KIT
SMARTER WAY TO MAP, TRACK & TRAIN
Web Manual
Please read this manual thoroughly before
operating the PATHFINDER SE KIT.

23
PACKAGE CONTENTS
CAT® Phone
(S48c or S61)
PATHFINDER
(or PATHFINDER MINI)
Wearable carrying
holster
PACKAGE CONTENTS ...............................................................................................
OVERVIEW ...................................................................................................................
GETTING STARTED ....................................................................................................
CUSTOMIZED FUNCTIONS FOR PATHFINDER ..................................................
PTT BUTTON ............................................................................................................
BACK BUTTON ........................................................................................................
VOLUME BUTTONS ................................................................................................
ADDITIONAL FEATURES .........................................................................................
RETURN POLICY ........................................................................................................
WARRANTY ................................................................................................................
1.
2.
3.
CONTENTS
3
4
6
7
8
9
9
10
11
11

45
OVERVIEW
* Check PATHFINDER manual to see details and how to charge the device.
PATHFINDER COMES WITH SPECIAL EDITION RECEIVER
WITH BEACON & LOCATE LED LIGHT
CAT® PHONE SET UP FOR PATHFINDER
* Customized for PATHFINDER with quick access operation buttons.
** Thermal imaging camera is only available on S61 model only.
*** When the display is off, double click the “Home” circle button to turn
on the device.
To use the PATHFINDER app as shown above on the CAT® Phone device,
please follow the following steps.
1. Programmable Key (PTT Key):
• PATHFINDER app: program as quick access button to open and use
PATHFINDER app
• Depending on the setting in the app, the PTT will apply Nick or Constant
stimulation, Tone, or Locate signal
2. Back Button:
• PATHFINDER app: press to toggle between Map, Compass, E-Collar tabs
• Press to go to previous screen
3. Volume Keys:
• PATHFINDER app: depending on setup, "Map zoom" will zoom in and out of map
or "Collars" will select between paired receivers
Battery Charging
Receptacle &
Rubber Plug
(on the back)
Power &
Select
Button
Connect
Button
MURS Band
Antenna
Mic. Sensor
MURS Band
Antenna
GPS Antenna
LED Indicator Light
Power
Button
Battery Charging
Receptacle
Contact
Points
FREE
SATELLITE MAP
SELECTED
DEVICE
STATUS BAR
***
2. BACK BUTTON:
MAIN TAB TOGGLER
*
***
THERMAL
IMAGING
CAMERA
IP68
WATERPROOF &
DUSTPROOF
*
1. PTT BUTTON:
E-COLLAR BUTTON
3. VOLUME BUTTONS:
DEVICE SELECTION

67
CUSTOMIZED FUNCTIONS FOR PATHFINDER
APP DOWNLOAD
GETTING STARTED
Go to Google Play or the CAT Toolbox
app to find and download the Dogtra
PATHFINDER app.
PHONE SETTING
To use the PTT button, please follow these steps.
1. Go to “Programmable key” page under ‘Setting’ on the phone.
2. Turn off the ‘PTT Mode’.
3. Click “Short press” and find and select the ‘PATHFINDER’ app.
4. Click “Long press” and find and select the ‘PATHFINDER’ app.
On the PATHFINDER app On other pages while PATHFINDER app is
running in the background
SHORT PRESS LONG PRESS SHORT PRESS LONG PRESS
1.
PTT
BUTTON
On the main page:
Map/Compass/
E-Collar
Apply brief
Constant
stimulation, Tone,
or Locate signal
(Nick setup sends
one-time Nick
stimulation only)
On the main page:
Map/Compass/
E-Collar
Apply on-going
Constant
stimulation, Tone,
or Locate signal
(Nick setup sends
one-time Nick
stimulation only) Back to the
PATHFINDER app
Back to the
PATHFINDER app
& apply on-going
Constant, Tone, or
Locate signal
(Nick setup sends
one-time Nick
stimulation only)
Subpages
Back to the last
tab on the main
page & apply
one-time Nick
stimulation signal
Subpages
Back to last tab
on the main page
& apply on-going
Constant, Tone,
or Locate signal
2.
BACK
BUTTON
On the main page:
Map/Compass/
E-Collar
Rotate between
tabs
On the main page:
Map/Compass/
E-Collar
Quit the
PATHFINDER app
Back to the previous screen
Subpages
Back to the last tab
on the main page
Subpages
Back to the last tab
on the main page
3.
VOLUME
BUTTONS
On the main page:
Map/E-Collar
Depending on setup, "Map zoom" will
zoom in and out of map or "Collars" will
select between paired receivers
System volume System volume
PAIRING THE PATHFINDER
PATHFINDER GPS connector connects between your smartphone and PATHFINDER
GPS receiver. These devices need to be paired for the PATHFINDER system to work
properly.
1) PATHFINDER app >Settings >
Bluetooth Pairing > Start Pairing.
2) Turn on the GPS connector > Click
‘SELECT’ button to select 'PHONE.'
3) Hold ‘CONNECT’ on the GPS connector
until the LED light starts blinking rapidly.
The light will stop blinking when paired.
CAT® Phone pairing with connector
1) Turn the receiver off. Press and hold
the power button on the receiver until
you hear a melodic sound.
2) Turn on the GPS connector> Click
‘SELECT’ button to select ‘COLLAR.'
3) Hold ‘CONNECT’ on the GPS connector
until the LED light starts blinking rapidly.
The receiver will emit 3 short beeps and
the light will stop blinking when paired.
Receiver pairing with connector
Power
Button

89
1. PTT BUTTON 2. BACK BUTTON
Please note PTT buttons will not operate on following occasions even if the feature
is activated:
• Selected ME marker
• E-Collar tab is locked
• Track-only mode
• No device is paired
• Selected a shared device
• Selected SPOT marker
You can disable the PTT button feature here if you want to turn it off for safety
reasons.
Turn on the mode to use the PTT button as following:
On the PATHFINDER app On other pages while PATHFINDER app is
running in the background
SHORT PRESS LONG PRESS SHORT PRESS LONG PRESS
On the main page:
Map/Compass/
E-Collar
Apply brief Constant
stimulation, Tone,
or Locate signal
(Nick setup sends
one-time Nick
stimulation only)
On the main page:
Map/Compass/
E-Collar
Apply on-going
Constant stimulation,
Tone, or Locate signal
(Nick setup sends
one-time Nick
stimulation only)
Back to the
PATHFINDER app
Back to the
PATHFINDER app &
apply on-going
Constant, Tone, or
Locate signal
(Nick setup sends
one-time Nick
stimulation only)
Subpages
Back to the last tab on
the main page & apply
one-time Nick
stimulation signal
Subpages
Back to last tab on the
main page & apply
on-going Constant,
Tone, or Locate signal
“Back” button function is customized to be used as ‘Main page’ button.
• On the main page, use it to toggle between Map, Compass, and E-Collar tabs.
• On thea it go straight to the last main page.
• Press and hold to quit the app.
MAP COMAPSS E-COLLAR
Select the mode you wish to use the volume buttons for.
• Select “Map zoom” to zoom in and out via volume buttons
• Select “Collars” to select between paired receivers
• Select "None" to not use the feature
3. VOLUME BUTTONS

10 11
ADDITIONAL FEATURES
Tap the screen once to hide the mode
titles at the bottom. Tap the screen
twice to zoom in on the map.
This function will not work on the
E-Collar or Compass tabs.
With the device turned on, use the
PTT button on any other screen to go
straight to the PATHFINDER app.
You can also disable the lock screen to
skip this step all together.
Receiver status bar on the top of
the app screen shows the selected
receiver’s set up and distance from you.
When the display is off, double click
the “Home” circle to turn on the device.
RETURN POLICY
Return Policy
Customers may return both devices (cannot return separately) within 30 days from
the date of purchase for a refund. No refunds or returns will be accepted after 30
days from the date of purchase.
All products returned must include a proof of purchase, original packaging, and all
contents must be in “like-new” condition.
Refund amounts exclude shipping charges or any other add-on charges to and
from the customer’s location.
Attention!
This is a special bundle pack and parts cannot be resold separately. The
warranty will be voided if sold separately and the serial number will be invalid.
PATHFINDER 2 YEAR WARRANTY
In order to qualify, you’ll need:
1. Proof of purchase
2. Both product boxes and serial numbers for the Dogtra e-collar and
CAT® smartphone
REGISTER ONLINE AT: www.dogtra.com/product-registration
For warranty services and repair after 30 days from the date of purchase on the
Dogtra e-collar, please contact Dogtra at [phone] or visit
www.dogtra.com/support.
CAT® SMARTPHONE 2 YEAR WARRANTY
The warranty activation date and covered period of the Dogtra warranty will
equally apply to the bundled CAT® smartphone. For warranty services and repair
after 30 days from the date of purchase on the CAT® smartphone, please contact
CAT® at [phone] or visit http://www.catphones.com/en-us/help-support/.
Please keep your proof of purchase and both product
boxes in order to verify your warranty coverage period.