DoHome PA User manual

Product Parameters
Starting Using for DoHome-PA
DoHome-PAProduct
Input Voltage
Rated Current
Max Load Power
Product Size
90-250V
15A(Max)
3000W
48*48*52mm
Technology Support: [email protected]

Warm tips:
Please check if the smart plug has any
abnormal noise, damage, fracture or other
problems. If not, power on the plug and
check if the indicator light is blinking slowly.
(the light blinks about one time each
second).
Light blink 1s
per second

Note:
If the interface doesn’t pop up automatical-
ly, please open your phone browser and
HomeKit (ONLY for Apple users):
Step1:
Please open the WLAN setting page
of your iPhone (as Fig. 1), find and connect
the WiFi hotspot named as Homekit_xxxx.
After about 3s, WiFi configuration interface
will pop up automatically.
Note:
If the smart plug doesn’t blink slowly, please
long press the button for 5s to set it to this
mode.

Step2:
Please choose your home WiFi router
name in the pop-up window, key your
input http://192.168.4.1. And then, please
wait for entering the interface of configura-
tion.
( Fig. 1)

password and click “join” (as Fig. 2). After
the WiFi configuration interface has skipped
to the WiFi list page (as Fig. 3), please make
sure that the indicator always lights (the
WiFi account information in the pictures is
only for reference).
( Fig. 2) ( Fig. 3)

Note:
If you don't find your router or smart plug at
other states, please look over the Frequent
Problems and reconfigure the smart socket.
Step3:
Please check if you have installed
Home APP. If not, please download it in the
APP store. (as Fig. 4)
( Fig. 4)

Step4:
Please connect your phone with
your home WiFi network (as Fig. 5).
( Fig. 5)
Note:
Please ensure that the iPhone and the smart
plug are in the same 2.4G WiFi network.

Step5:
Please open Home APP, click “Add
accessory”. And then, Please put the code
(i.e., 123-45-678) of Figure 6 into the
frame. Click the device, “Add anyway”.
After waiting for the encryption check
(about 50s), you have added the switch
successfully.
( Fig. 6)

Note:
If the code is not recognized， please click
“Don’t have a code or cannot scan”, Click
the device, “Add anyway”, and input the
code “12345678”. After waiting for the
encryption check (about 50s).If Home APP
doesn’t show the device, please make sure
that the phone and the smart plug are in the
same local network. If you still cannot add
your device, please look over the Frequent
Problems.

Step1:
Please power on the plug and check
that the indicator light is blinking slowly (1
time every second). Long press the button
of smart plug for 5s and observe that the
indicator light blinks quickly (10 times every
second).
Step2:
Use your phone to scan the following
QR code and download DoHome APP.
For others:

Step3:
Open DoHome APP, register your
account using your name and password,
and then login the DoHome APP.

Step4:
Click the“+”in the upper right corner
to add the device according to the hint.
If you still have a doubt, please click the
menu in the upper right corner (≡) to look
for help.
Note:

Step5:
If want to use the smart speaker,
e.g., Alexa, google assistant, Tmall or
Xiaomi, please click the“≡”in the upper
right corner to look for the correspond-
ing instructions.
Technology Support (OTA update):
http://support.doiting.com

2. Register and login your account informa-
tion of DoHome. Pull down and refresh the
interface to look for your smart device.
1. Scan the QR code in the following and
download DoHome APP.
Frequent Problems:
Q1. How do Homekit users use smart audio
devices such asAlexa, Google Assistant,
Tmall genie or XiaoMi audio?

Note:
The phone and the smart plug must be
connected in the same WiFi network.
3. Please open the menu in the upper left
corner, click “Manager” and find your
device. And then, choose it and click “Bind
device”.

Note:
(1). You must login the 3rd platform to login
your DoHome account before using it.
(2). If you want to use the smart audio,
please click the corresponding icon to
check the user manual. If you need help,
please click the option of help;

Q2: When adding the device, if the pop-up
window prompts “whether accept the app
to get the location”, how to handle it?
Q3. Why the device name should be short?
A.This question is very important, please
must click “accept or yes”.
A.Because it is convenient for voice
controlling function, for example, DoHome.
A. Long press the button of the smart plug
(5s) and the indicator light will blink slowly.
Q4: How to reset the socket to the factory
mode?

Q5.During the network configuration,if there
is something you should take attention of?
1.Please make sure that the device, your
phone and the router are close to each
other during the network configuration.
2.Please ensure that you input the password
of the router correctly.
3.During the configuration of network,
please keep that the router works in the
2.4G frequency domain, enables the
broadcasting function and works in the
non-11n only mode.
4.During the configuration of network,
please ensure that wireless encryption

mode of the router is wpa2-psk and the
type of authorization is AES. Or both are set
to the automatic mode.
5.During the network configuration, if the
router opens the wireless MAC address
filter, please move the device away from the
MAC filter list of the router.please confirm
whether the router has the firewall function.
If this function exists, please turn off the
firewall function and then try to connect the
device to the router.
6. If it is a dual-frequency router, please set
different passwords for 2.4G signal and 5G
signal or turn off 5G signal. Please
remember not opening the function of
dual-frequency combination.