Dolphin DB1900 Product manual

October 2019
DB1900
DOLPHIN PANEL MOUNTED
SENSOR TAP
INSTALLATION AND MAINTENANCE GUIDE

2 | Dolphin Blue | DB1900 Series
2 Technical Data
3 Product Diagram
4-6 Installation Steps
7 Maintenance
7 Limited Warranty
Item no: DB 1900
Description: Dolphin Sensor Tap
Power: DC: 6v (4 x AA alkaline batteries)
AC: 220V-240V 50/60Hz
Power consumption: < 0.3MW
Sensing distance: 100mm
Water pressure: 0.5 - 7.0 bar
Temperature: 0.1 - 45ºC
Diameter of inlet pipe: G(1/2)”
Diameter of outlet pipe: G(1/2)”
Flux: < 0.15 (L/S)
TECHNICAL DATA
CONTENTS

DB1900 Series | Dolphin Blue | 3
Cover
50mm
Tap body
Spout
300mm minimum
distance to surface
beneath
Ceramic wall Counter top
Signal line
Signal line connector
Signal transformation
Line
Control box
inc solonoid
Red sensor
range button
Flexible hose
Pipe buckle
Transformation head
Water inlet hose
Water inlet
(with filter)
PRODUCT DIAGRAM

4 | Dolphin Blue | DB1900 Series
INSTALLATION STEPS
1. INSTALL TAP BODY TO THE WALL
cover
Wall
Sensor
Spout
Fix sensor tap to the wall
WARNING
• Highly reflective surfaces directly beneath the sensor of this product, in particular
polished finish basin wastes/ strainers, will cause false activation of the infrared
sensors and can result in malfunction. We recommend satin or matt finish
products which can be found on our website.
• It is very important to allow permanent access to the mounting tail/nut of this
product for future servicing and repair. Where this is not possible see our wall
plate mounted products.

DB1900 Series | Dolphin Blue | 5
INSTALLATION STEPS
2. CONNECT POWER
AC: Connect the transformer
DC: put in 4 x AA alkaline batteries into the battery box
3. CONNECT WATER
Connect the water feed for the
tap to the control box using the
flexible hose, ensuring the clip is
tightened properly.
Connect the water inlet hose
to the control box
Note: Check for leaks

6 | Dolphin Blue | DB1900 Series
INSTALLATION STEPS
4. CONNECT SIGNAL CABLE
Connect the signal cable with the control box.
Screw tightly.
Note: Keep this cable dry and clean to ensure you
do not have any faults.
INSTALLING THE CONTROL BOX
Mount the control box onto the wall, using screws
and plugs.
Note:
1. Turn off the water and power supply
before installation.
2. Be sure to install the control box correctly.
3. For easy maintenance, choose a suitable
place to install the control box. It must be
less than 500mm from the basin. (Please check the picture opposite).
4. Ensure the tap spout when installed is 300mm from the surface beneath to
ensure sensor has room to work.
To adjust the sensor range, press the red button on the control box while
placing a hand beneath the sensor at the desired activation height.
820
550
650

DB1900 Series | Dolphin Blue | 7
MAINTENANCE
LIMITED WARRANTY
AFTERCARE
Whilst modern plating techniques are used in the manufacture of this product, the
surface will be affected if cleaned incorrectly. Surfaces should be maintained using a
clean damp cloth, no abrasive agents or materials should be used or come into
contact with the surface finish, or this will invalidate your guarantee.
Dolphin Solutions Ltd. warrants that its electronic products will be free of defects
in material and workmanship during normal use for two years from the date the
product is purchased.
If a defect is found in normal use, Dolphin Solutions Ltd will, at its discretion, repair,
provide a replacement part or product, or make appropriate adjustments. Damage
caused by accident, misuse, or abuse is not covered by this warranty. Improper care
and cleaning will void the warranty. Proof of purchase (original sales receipt) must
be provided to Dolphin Solutions Ltd with all warranty claims.
Dolphin Solutions Ltd is not responsible for labor charges, installation, or other
incidental or consequential costs other than those noted above. In no event shall
the liability of Dolphin Solutions Ltd exceed the purchase price of the product.
If you believe that you have a warranty claim, contact your Dolphin Solutions Ltd,
Dealer or Plumbing Contractor. Please be sure to provide all pertinent information
regarding your claim, including a complete description of the problem, the product,
model number, the date the product was purchased, from whom the product was
purchased and the installation date.Also include your original invoice.
DOLPHIN SOLUTIONS LTD AND/OR SELLER DISCLAIM ANY
LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES.

Dolphin Solutions Ltd
Southpoint, Compass Park, Bodiam,
Robertsbridge,TN32 5BS
Tel: [phone]
Fax: [phone]
[email protected].uk
www.dolphinsolutions.co.uk