DOM FAMILY 364 User manual
#364 CONVERTIBLE RIDER
CANOPY - Instruction Manual
Suitable only for Dream On Me #365 Rider
IMPORTANT
BEFORE ASSEMBLING THIS CANOPY, PLEASE READ AND UNDERSTAND THESE
INSTRUCTIONS. INCORRECT ASSEMBLY MAY CAUSE THE RIDER TO BE UNSAFE.
DO NOT USE THIS CANOPY IF ANY PARTS ARE BROKEN, TORN OR MISSING.
RETAIN FOR FUTURE REFERENCE - READ CAREFULLY
ASSEMBLY
1. Attach the holder to the bar.
The cylinder on the bar should be
aligned with the hole in the
bracket, as shown in Fig 1.
2. Firmly fasten the buckle to the
left until the safety lock is
completely ejected, as shown in
Fig 2.
Make sure that the canopy is in
place by tugging on it.
Press in the button in the center of the holder of the canopy to adjust the
canopy to different angles (as shown in Fig 4 and 5).
Handle
connector
Buckle
Bar
Safety
lock
3. When disassembling the canopy,
press the safety lock indicated by the
arrow in Fig 3 and open the buckle.
ANGLE ADJUSTMENT
Dream On Me Inc.
1532 South Washington Ave, Piscataway TWP, NJ 08854
Tel: 732-752-7220 Fax: 732-752-7221 MADE IN ZHONG SHAN, CHINA
Table of contents
