DoorBird D21 Series User manual

HOW-TO SERIES
1/2
Copyright 2018 Bird Home Automation GmbH - www.doorbird.com - [e-mail] –All companies, logos and product names are trademarks or registered trademarks of the respective companies. Stand 01.08.2018
How to configure the users for multi-tenant DoorBird models
Requirements:
DoorBird IP Video Door Station D21x multi-tenant model (e.g. D2102V, D21DKH)
Introduction:
The DoorBird includes a configured administrator login and one user to add the device to your DoorBird
App. This information is available on your Digital Passport / Quickstart Guide.
These standard settings require additional configurations. The following guide shows how to configure the
DoorBird D21x series for two tenants.
Please follow these steps:
1) Make sure your device is online: https://www.doorbird.com/checkonline
2) Log into the administration of the DoorBird App (Settings -> Administration -> Login) with your
administration login user (e.g. bbbbbb0000).
3) Click on “Settings”(depending on the model of your DoorBird IP Video Door Station) as shown below:
4) Set up your key codes (0001/0002 in the example) or buttons (J1 is the top button, J2 is the bottom
button)
5) Back in the administration menu, click on “Add”and create as many users as you have key codes /
buttons (the administration user bbbbbb0000 does not count). Then assign a key code / button to each user
(“assign doorbell”).

HOW-TO SERIES
2/2
Copyright 2018 Bird Home Automation GmbH - www.doorbird.com - [e-mail] –All companies, logos and product names are trademarks or registered trademarks of the respective companies. Stand 01.08.2018
6) When all key codes / buttons are assigned to each user, the administration menu looks as in the example
below. Press the “Save” button to finalize the setup in the administration of the DoorBird App.
7) Make sure to have the credentials for your users (in this example bbbbbb0001 and bbbbbb0002) to
continue the process. The “send by e-mail” function allows to send the credentials with a QR code to the
desired e-mail address. This makes further process easier. Alternatively you can also write down the
credentials.
8) Now press the settings symbol on the mobile device that you with to connect to the DoorBird and
click on “Add”. Please scan the QR code from the e-mail or type in the credentials manually.
After adding the credentials, the DoorBird is ready for the use with the mobile device.
Regular case: Family 1 gets access to the DoorBird with their user details bbbbbb0001 (assigned to their key
code / button) and Family 2 gets access to the DoorBird with their user details bbbbbb0002 (assigned to
their key code / button).
Special case: If two key codes / buttons need to be accessed on one specific device, both credentials
bbbbbb0001 and bbbbbb0002 need to be added. This is useful for installations where the same user does
have both, a private apartment and business premises in the same building.
The live view with the set up example and both added users looks like this: