Dorel Home Products DA7104W-TAM User manual

B34DA7104W-TAM00-111674
5 Piece Traditional Pedestal Dining Set
Thank you for purchasing from Dorel!
Weight Limit: 50 lb / 23 k g (Table)
Weight Limit: 250 lb / 113 k g (Chair)
TAI. 2021.06.24
Date of Purchase Lot Number (TAKEN FROM CARTON)
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1
DA7104W-TAM (White),
DA7104B-TAM (Black)
Questions, concerns, missing parts?
CONTACT OUR CUSTOMER SERVICE DEPARTMENT
BEFORE RETURNING PRODUCT TO THE RETAILER.
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Visit www.dhpfurniture.com/eng/replacement-parts
or call Toll-Free 1-800-267-1739.
You can also chat with us at www.dhpfurniture.com
©2021 Dorel Home Products All Rights Reserved

2
Read Before Beginning Assembly
●Work in a spacious area and near where the unit will be used, preferably on a
carpet, or use a piece of the cardboard packaging to protect your floor and product.
●Make sure all parts are included. Most parts are labeled or stamped on the raw
edge.
●Read each step carefully. It is very important that each step of the instructions is
performed in the correct order. If these steps are not followed in sequence,
assembly difficulties will occur.
●This product may contain small components. Please ensure that they are kept
away from small children.
●This product is designed for home use and is not intended for commercial use.
Limited 1 year Warranty
Dorel warrants this product to be free from defects in material and workmanship
and agrees to remedy any such defect. This warranty covers one year from the
date of original purchase from authorized retailers. This is solely limited to the
repair or replacement of defective parts and assembly labor is not included.
This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired
in any way.The warranty does not cover wearing, tearing, fading or splitting of
the fabric (where applicable). Liability for consequential damages is excluded to
the extent exclusion is permitted by law. This warranty gives you specific legal
rights and you may also have other rights which vary from state to state or
province to province.
To obtain warranty service, purchaser must present original bill of sale.
Components repaired or replaced are warranted through the remainder of the
original warranty period only. The defective components will be repaired or
replaced without charge, subject to the terms and conditions described above.
Visit www.dhpfurniture.com to view the limited warranty valid in the U.S. and
Canada.
Contact Us!
For help with assembly, identifying parts, product information or to order parts,
please contact us:
DHP Consumer Services
12345 Albert Hudon, Suite 100,
Montreal, Quebec H1G 3L1
[e-mail]
1-800-267-1739
Monday to Friday
Saturday
Sunday
9am to 9 pm (Eastern Time)
10 am to 6:30 pm (Eastern Time)
11 am to 7 pm (Eastern Time)
Chat
with us! www.dhpfurniture.com Tools required
(not included)
Phillips head screwdriver
This product is packaged in
1 carton
1 hour
Do NOT use
powertools

PARTS (TABLE)
3

PARTS (CHAIR)
4
X 4PCS

Each part has a unique part number.
Please reference the appropriate part
number when contacting customer
service for replacement parts.
Before throwing any packaging, please
verify all contents and make sure you
have received all the parts listed above!
5
PARTS LIST (TABLE)
B
D
Table Base panel
1 PC
Leg
4 PCS
Table Top
1 PC
Center Post
1 PC
PART NUMBER
PART LABEL DESCRIPTION DA7104W-TAM
(White)
DA7104B-TAM
(Black)
ATable Top T711840 T711920
BTable Base Panel T711850 T711930
CCenter Post T711860 T711940
DLeg T711870 T711950
CA

Each part has a unique part number.
Please reference the appropriate part
number when contacting customer
service for replacement parts.
Before throwing any packaging, please
verify all contents and make sure you
have received all the parts listed above!
6
PARTS LIST (CHAIR)
EF
H
G
Seat Frame
4 PCS
Front Leg
8 PCS
Back Frame
4 PCS
Seat Board
4 PCS
PART NUMBER
PART LABEL DESCRIPTION DA7104W-TAM
(White)
DA7104B-TAM
(Black)
EBack Frame T711880 T711960
FFront Leg T711890 T711970
GSeat Frame T711900 T711980
HSeat Board T711910 T711990

BOLT
X 16 PCS
BOLT
X 16 PCS
SCREW
X 20 PCS
HEX NUT
X 8 PCS
FLAT WASHER
X 8 PCS
ADJUSTERS BOLT
X 4 PCS
WRENCH
X 1 PC
BOLT
X 12 PCS
SPRING WASHER
X 44 PCS
FLAT WASHER
X 40 PCS
ALLEN KEY
X 1 PC
HARDWARE LIST ( TABLE AND CHAIR)
5/16” 5/16 “ X 21 MM M6 X 20 MM 12.8MM
1/4 “ X 18 MM
1/4 “ X 12 MMM6 X 40 MM
M6 X 80 MM M4 X 32 MM
Hardware Pack
DA7104W-TAM (White)
DA7104B-TAM (Black) HP# : TDA7104W-TAM-00
Please do not completely tighten all the hardware,
until the entire assembly is complete, unless
otherwise indicated in the step-by-step
instructions.
The screw(s), bolt(s) to be used at each step are
shown in actual size in the lower right corner of the
page. 7
1 2 3
5 6 78
4
M4
11
10
9
M6 X 70 MM

Step 1
8
X 8
Attach legs Dx 4 to center post C with hex
nuts ❶and flat washers ❷.
Use wrench ❹to tighten the hex nuts.
Insert levelers ❸to legs D x 4.
1
X 8 X 4
3
4
12
23

9
Attach table base panel Bto center post
C with bolts ❺and spring washers ❻.
Use Allen key ❽to tighten the bolts.
Step 2
X 4
5
6
8
X 4
6
5

NOTE : Make sure the table top Ais
placed on a clean and flat surface.
Tighten fully all the bolts before turning
the table upright.
Step 3
10
Attach table base panel Bto table top A
with screws ⓫. Use a Philips head
screwdriver to tighten all the screws.
X 8
11
11