Dorel Living DA8226 User manual

Model Number: UPC Code: Color:
DA8226
0-65857-19315-2 BRONZE
Date of Purchase: _____ / _____ / _____ Lot Number:
(located on carton)
Questions, concerns, missing parts? Customer satisfaction is important to us at Dorel Asia.
CONTACT OUR CUSTOMER SERVICE DEPARTMENT BEFORE RETURNING PRODUCT
TO THE RETAILER.
Our agents are available Monday to Friday 8am to 5pm (EST) to take your call and answer
any questions. For faster service, always have the model number ready when contacting us.
toll free #: 1-800-295-1980
You can also reach us by email or by visiting our website and clicking on the Support tab:
[email protected]
www.dorelliving.com
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Queen Metal Bed
For more great furniture ideas, check out our website at www.dorelliving.com
You can also keep up to date on all the latest trends by liking our Facebook page
Congratulations on your latest furniture purchase! Dorel Living furniture has been developed
with quality, convenience and style in mind. We trust it will provide you with many years of
exceptional comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new furniture
piece by taking a few minutes to go through this booklet. It contains important information on
our warranty and care tips to keep your furniture looking as good as new.
and Instagram page.

*
*
*
*
*
*
*
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy any
such defect. This warranty covers 1 year from the date of original purchase from authorized retailers.
This warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This warranty does
not apply to any product which has been improperly assembled, subjected to misuse or abuse or which
has been altered or repaired in any way. The warranty does not cover wearing, tearing, fading or splitting
of the fabric (where applicable). This warranty gives you specific legal rights and you may also have
other rights which vary from State to State or Province to Province.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
CARE, CLEANING AND MAINTENANCE
Dust this item regularly with a soft, lint-free cloth to prevent soil build up. Do not soak or wash in hot
water. Wipe with a soft, damp cloth if necessary. Do not use abrasives, cleansers or polish.
Check all bolts, screws and fasteners periodically and tighten them if necessary.
1-YEAR LIMITED WARRANTY
Montreal, Quebec
Canada, H1G 3L1
Assembly may require two people.
Estimated assembly time is 45-60 minutes
CUSTOMER SERVICE
You can also contact us by writing to the address listed below. Please include the product model
number, color and a detailed description of your enquiry.
Dorel Living - Customer Service Department
12345 Albert-Hudon Boulevard, Suite 100
NOTES AND INSTALLATION
Ensure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to the product finish.
Read all instructions before use.
DO NOT use power tools.
CAUTION: Adult assembly required.

10mm
WRENCH
1 PC
Φ1/4"×2.6mm
SPRING WASHER
8 PCS
Φ1/4"x5/8"
BOLT
8 PCS
Φ6.5×Φ14×1.0mm
FLAT WASHER
8 PCS
5
6
8
9
Queen Metal Bed
DA8226
HARDWARE LIST
1
2
3
Φ1/4"x1-1/4"
THREADED PIN
4 PCS
M4
ALLEN KEY
1 PC
NUT
6 PCS
4
BOLT
12 PCS
Φ1/4"×11mm×8mm
Φ1/4"x1/2"
Φ1/4"x1-3/4"
BOLT
12 PCS
7

FINIAL
4 PCS
SLAT
3 PCS
STRETCHER
1 PC
SUPPORT LEG
6 PCS
1 PC
2 PCS
2 PCS
G
H
I
J
D
E
F
LEFT POST
LONG SIDE RAIL
SHORT SIDE RAIL
HEADBOARD
FOOTBOARD
RIGHT POST
1 PC
1 PC
1 PC
Queen Metal Bed
DA8226
PARTS LIST
A
B
C

STEP 1
Queen Metal Bed
DA8226
Attach right and left post (C & D) to headboard (A) using bolts (1) and Allen key (6).
Ensure the headboard (A) and posts (C & D) are aligned and flush before tightening
the bolts.
REAR VIEW

STEP 2
Queen Metal Bed
DA8226
Attach stretcher (H) to right and left headboard posts (C& D) using bolts (1) and
Allen key (6) as shown below.
Ensure the stretcher (H), headboard (A) and posts (C & D) are aligned and flush
before tightening the bolts.
FRONT VIEW

STEP 3
Queen Metal Bed
DA8226
Insert the short side rail (F) to long side rail (E) and secure them using bolts (1).
Use the Allen key (6) to tighten the bolts.

STEP 4
Queen Metal Bed
DA8226
Attach support legs (I) to slats (G) using bolts (3). Use the Allen key (6) to tighten
the bolts.

STEP 5
Queen Metal Bed
DA8226
Attach the previously assembled side rails (E & F) to headboard posts (C & D) and
footboard (B) using bolts (2), flat washers (9) and spring washers (8) and Allen key
(6) as shown below.
Ensure side rails on both sides are aligned before tightening the bolts.

STEP 6
Queen Metal Bed
DA8226
Attach the slats (G) to the side rails (E & F) using bolts (3) and nuts (4).
Use the Allen key (6) to tighten the bolts and wrench (7) to tighten the nuts as
shown below.