Dorel Living DL8071 User manual

DL8071
0-65857-19823-2
FUTURE REFERENCE.
LOT NUMBER:
(LOCATED ON CARTON)
DO NOT RETURN PRODUCT TO THE RETAILER
If a part is missing or damaged, Contact our
customer service department. We will
replace the part FREE of charge.
Tel # : [phone]
E-Mail: [e-mail]
______ / ______ / ______
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
READ AND KEEP FOR
DATE OF PURCHASE:
INFORMATION. PLEASE
NOTE:
UPC CODE:
TODDLER
BED
INSTRUCTION MANUAL
MODEL NO:

*
*
*
*
*
*
*
*
*
* Ensure all parts and components are present before beginning assembly.
* Phillips head screwdriver is not included.
* Assembly will require 2 people.
* Estimated assembly time: 45 minutes.
* DO NOT use power tools.
*
Caution: Adult assembly required.
* DO NOT lift bed from side rails when moving. Raise from headboard and footboard when
moving bed.
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to
avoid the formation of a gap between the mattress and the bed that could cause an entrapment.
DO NOT suspend strings over a toddler bed for any reason.
Montreal, Quebec
Failure to follow these warnings and assembly instructions could result in serious injury or
death from entrapment or strangulation.
NEVER use bed with children under 15 months.
Infants have died in toddler beds from entrapment and strangulation.
strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings
CUSTOMER SERVICE
You can also contact us by writing to the address listed below. Please include the product model
number, color and a detailed description of your enquiry.
The TODDLER BED is not intended for children under 15 months of age or over 50 pounds
(22.7kg).
Canada, H1G 3L1
Dorel Living - Customer Service Department
WARNING ENTRAPMENT/
STRANGULATION HAZARD:
12345 Albert-Hudon Boulevard, Suite 100
Any mattress used must be at least 27-1/4 inches by 51-5/8 inches (69cm by 131cm) with a minimum
thickness of 4 inches (10cm) and not exceeding 6 inches (15cm).
DO NOT place TODDLER BED near windows where cords from blinds or drapes may
NOTES
or pacifier cords.

WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
Dorel warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase from
authorized retailers. This warranty is valid only upon presentation of proof of purchase. This is
solely limited to the repair or replacement of defective furniture components and no assembly
labor is included. This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired in any way. The
warranty does not cover wearing, tearing, fading or splitting of the fabric (where applicable). This
warranty gives you specific legal rights and you may also have other rights which vary from State
to State or Province to Province.
CARE, CLEANING AND MAINTENANCE
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can
damage wood furniture.
Check bolts periodically and tighten if necessary.
1-YEAR LIMITED WARRANTY

1 2
3 4
5 6
7
4MM
∅1/4" x 1/2"
STOPPER
3 PCS
WOOD DOWEL
4 PCS
WOOD DOWEL
20 PCS
BARREL NUT
10 PCS
ALLEN KEY
1 PC
∅10mm x 40mm
∅8mm x 30mm
TODDLER BED
DL8071
BOLT
4 PCS
BOLT
18 PCS
∅1/4" x 2-3/4"
∅1/4" x 1-3/4"
HARDWARE LIST
Ø8mm x 30mm
20 PCS
WOOD DOWELWOOD DOWEL
24 PCS
Ø10mm x 40mm
ALLEN KEY
1 PC
4MM
10 PCS
BARREL NUT
Ø1/4" x 1/2"
18 PCS
HEX SOCKET HEAD BOLT
Ø1/4" x 2-1/2"
65
43
2
1
HARDWARE LIST
HEX SOCKET HEAD BOLT
6 PCS
Ø1/4" x 1-3/4"
Ø8mm x 30mm
20 PCS
WOOD DOWELWOOD DOWEL
24 PCS
Ø10mm x 40mm
ALLEN KEY
1 PC
4MM
10 PCS
BARREL NUT
Ø1/4" x 1/2"
18 PCS
HEX SOCKET HEAD BOLT
Ø1/4" x 2-1/2"
65
43
2
1
HARDWARE LIST
HEX SOCKET HEAD BOLT
6 PCS
Ø1/4" x 1-3/4"
Ø8mm x 30mm
20 PCS
WOOD DOWELWOOD DOWEL
24 PCS
Ø10mm x 40mm
ALLEN KEY
1 PC
4MM
10 PCS
BARREL NUT
Ø1/4" x 1/2"
18 PCS
HEX SOCKET HEAD BOLT
Ø1/4" x 2-1/2"
65
43
2
1
HARDWARE LIST
HEX SOCKET HEAD BOLT
6 PCS
Ø1/4" x 1-3/4"
Ø8mm x 30mm
20 PCS
WOOD DOWELWOOD DOWEL
24 PCS
Ø10mm x 40mm
ALLEN KEY
1 PC
4MM
10 PCS
BARREL NUT
Ø1/4" x 1/2"
18 PCS
HEX SOCKET HEAD BOLT
Ø1/4" x 2-1/2"
65
43
2
1
HARDWARE LIST
HEX SOCKET HEAD BOLT
6 PCS
Ø1/4" x 1-3/4"

A B C
D E F
G H I
J K L
FOOTBOARD POST
2 PCS
CENTER SUPPORT SLAT
1 PC
WIDE SUPPORT SLAT
4 PCS
NARROW SUPPORT SLAT
6 PCS
LEFT SIDE RAIL
1 PC
RIGHT SIDE RAIL
1 PC
GUARDRAIL
2 PCS
TODDLER BED
DL8071
PARTS LIST
HEADBOARD POST
2 PCS
HEADBOARD TOP
1 PC
HEADBOARD PANEL
1 PC
HEADBOARD BOTTOM RAIL
1 PC
FOOTBOARD PANEL
1 PC

NOTE: Do not fully tighten the bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
Insert the headboard panel (C) into the grooves of the top (B) and post (A).
TODDLER BED
DL8071
STEP 1
Attach headboard top (B) to headboard post (A) using bolt (2) as shown. Use the Allen Key
(4) to tighten the bolt.
2
A
C
B
A
C
B
A
2
2
4
B
NOTE: The headboard
panel (C) is reversible.

TODDLER BED
DL8071
STEP 2
NOTE: Do not fully tighten the bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
Insert stoppers (7) into the groove of headboard bottom rail (D) as shown.
Insert wood dowel (5) into the headboard bottom rail (D).
Attach headboard bottom rail (D) to headboard post (A). Ensure the headboard panel (C)
is in the groove of bottom rail (D).
Secure bottom rail (D) to headboard post (A) with bolt (1). Use Allen Key (4) to tighten the
bolt.
C
D
A
1
4
7
5
1
7
5

Insert wood dowel (5) into the post (A) as shown.
Attach headboard post (A) to the top (B) and rail (D) with bolts (1 & 2). Use the Allen Key
(4) to tighten the bolts.
NOTE: Tighten all the bolts.
TODDLER BED
DL8071
STEP 3
B
D
1
2
4
5
2
1
5

TODDLER BED
DL8071
STEP 4
Insert wood dowels (5) to the footboard panel (F).
Attach footboard posts (E) to panel (F) with bolt (1). Use the Allen key (4) to tighten the
bolts.
1
5
F
E
E
1
5
15
4

TODDLER BED
DL8071
STEP 5
Insert barrel nuts (3) into side rails (G & H) as shown.
Attach side rails (G & H) to the headboard with bolts (1)
Use the Allen key (4) to tighten the bolts (1).
NOTE: The barrel nut (3) can be rotated using a screwdriver (not included) to properly align
with the bolt coming through side rail (G & H).
1
3
PRE DRILLED HOLE FACING UP
H
G
A
1 3
3
1
4