Dorel Living DL8718 User manual

Model Number: UPC Code:
DL8718
0-65857-19847-8
Date of Purchase: _____ / _____ / _____ Lot Number:
(located on carton)
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Congratulations on your latest furniture purchase! Dorel Living furniture has been developed
with quality, convenience and style in mind. We trust it will provide you with many years of
exceptional comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new furniture
piece by taking a few minutes to go through this booklet. It contains important information on
our warranty and care tips to keep your furniture looking as good as new.
Questions, concerns, missing parts? Customer satisfaction is important to us at Dorel Asia.
CONTACT OUR CUSTOMER SERVICE DEPARTMENT BEFORE RETURNING PRODUCT
TO THE RETAILER.
Our agents are available Monday to Friday 8am to 5pm (EST) to take your call and answer
any questions. For faster service, always have the model number ready when contacting us.
toll free #: 1-800-295-1980
You can also reach us by email or by visiting our website and clicking on the Support tab:
[email protected]
www.dorelliving.com
5 PC METAL GLASS DINETTE
For more great furniture ideas, check out our website at www.dorelliving.com
You can also keep up to date on all the latest trends by liking our Facebook page
and Instagram page.

*
*
*
*
*
*
*
*
Assembly may require two people.
Estimated assembly time is 45-60 minutes
Phillips head screwdriver is not included.
Ensure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to the product finish.
Read all instructions before use.
DO NOT use power tools.
CAUTION: Adult assembly required.
Montreal, Quebec
Canada, H1G 3L1
NOTES AND INSTALLATION
CUSTOMER SERVICE
You can also contact us by writing to the address listed below. Please include the product model
number, color and a detailed description of your enquiry.
Dorel Living - Customer Service Department
12345 Albert-Hudon Boulevard, Suite 100
1-YEAR LIMITED WARRANTY
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy
any such defect. This warranty covers 1 year from the date of original purchase from authorized
retailers. This warranty is valid only upon presentation of proof of purchase. This is solely limited to the
repair or replacement of defective furniture components and no assembly labor is included. This
warranty does not apply to any product which has been improperly assembled, subjected to misuse or
abuse or which has been altered or repaired in any way. The warranty does not cover wearing, tearing,
fading or splitting of the fabric (where applicable). This warranty gives you specific legal rights and you
may also have other rights which vary from State to State or Province to Province.
CARE, CLEANING AND MAINTENANCE
Dust this item regularly with a soft, lint-free cloth to prevent soil build up. Do not soak or wash in hot
water. Wipe with a soft, damp cloth if necessary. Do not use abrasives, cleansers or polish.
Check all bolts, screws and fasteners periodically and tighten them if necessary.

5 PC METAL GLASS DINETTE
DL8718
CHAIR BACK
CHAIR LEFT LEG
CHAIR RIGHT LEG
C
PARTS LIST
I
4 PCS
4 PCS
4 PCS
STRETCHER
SEAT CUSHION
GLASS TOP
F
1PC
4PCS
1PC
A
D
G
B
E
H
4 PCS
4 PCS
1 PC
TOP FRAME
TABLE LEG
TABLE TUBE BASE

4 PCS
52 PCS
16 PCS
1 PC
BOLT
SCREW
ALLEN KEY
5 PC METAL GLASS DINETTE
DL8718
Ø1/4"*1/2"
Ø5/32"*5/8"
M4
1
HARDWARE LIST
2
3
RUBBER PAD
4

STEP 1
5 PC METAL GLASS DINETTE
DL8718
Attach table legs (H) to the table frame (G) with bolts (1) using the Allen Key (3) as shown
below.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following steps.
1
1
H
1
H
3
H1
1
G
H

STEP 2
Adjust the assembled unit to ensure all surfaces are aligned and flush and tighten all the bolts
installed.
Turn the table upright.
5 PC METAL GLASS DINETTE
DL8718
Attach the table tube base (I) to the table legs (H) with bolts (1) using the Allen Key (3).
1
H
H
1IH
3
H

Ensure the table top is placed at the center of the table frame.
5 PC METAL GLASS DINETTE
DL8718
STEP 3
Place rubber pads (4) onto the table frame (G).
With the help of another person, gently put the glass top (F) on the table frame (G).
4
4
4
4
4
G
F

STEP 4
5 PC METAL GLASS DINETTE
DL8718
Attach chair left leg (B) and chair right leg (C) to the chair back (A) with bolts (1) using the Allen
key (3).
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following steps.
A
BC
1

5 PC METAL GLASS DINETTE
DL8718
STEP 5
Place stretcher (D) between the chair left leg (B) and the chair right leg (C).
Using the Allen key (3), secure the stretcher (D) to the chair legs (B & C) with bolts (1).
Turn the chair frame upright and make sure it rests evenly on the floor.
Use Allen key (3) to tighten all the bolts.
1
DC
B

5 PC METAL GLASS DINETTE
DL8718
STEP 6
Place the chair frame and seat cushion (E) upside down as shown below.
Attach seat cushion (E) to the chair frame with screws (2) using a Phillips head
screwdriver (not included).
Turn the assembled chair upright.
NOTE: screws (2) will make their own holes. Do not use power tools and do not over
tighten screws.
Repeat steps 4 to 6 to assemble the remaining chairs.
2
B
C
2
E