Dorel 01WM6108EC User manual

Model No.:
01WM6108EC ESPRESSO
01WM6108WC WHITE
0-65857-16046-8 ESPRESSO
0-65857-16047-5 WHITE
Lot number:
(TAKEN FROM CARTON)
Assembly Manual
UPC CODE:
TWIN BED
Date of purchase:
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
_______ / _______ / _______
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
NOTE:
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel # : [phone]
E-Mail: [e-mail]
Fax #: [phone]

*Ensure all parts and components are present before beginning assembly.
*Assemble on a soft, smooth surface to prevent damage to the product finish.
*Read all instructions before use.
*A Phillips head screw driver is not included.
*DO NOT use power tools.
*CAUTION: Adult assembly required.
*Assembly may require two people.
*Estimated assembly time: 30 minutes.
Check bolts/screws periodically and tighten them if necessary.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
CARE AND CLEANING
Montreal, Quebec
Canada, H1G 3L1
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT
USE.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood
furniture.
MAINTENANCE
LIMITED WARRANTY
Dorel Distribution Canada warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This warranty does not
apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been
altered or repaired in any way. This warranty gives you specific legal rights and you may also have other
rights which vary from Province to Province.
E-MAIL: [email protected]
NOTES

TWIN BED
01WM6108EC/01WM6108WC
METAL PLATE
2 PCS

TWIN BED
01WM6108EC/01WM6108WC

PARTS LIST
TWIN BED
01WM6108EC/01WM6108WC

NOTE: Top cross (E) and bottom cross (F) may require that they be pulled closer together or further apart in order to allow
wood dowels (4) to align with holes in headboard posts (A and B).
TWIN BED
01WM6108EC/01WM6108WC
Insert stoppers (10) and headboard slats (G) into each hole of the headboard bottom cross (F) and push down until firmly in
place. Slide the headboard top cross (E) onto the headboard slats (G).
Insert wood dowels (4) into the ends of top cross (E) and bottom cross (F).
Attach headboard posts (A and B) to top cross (E) and bottom cross (F) with wood dowels (4) and wood joint connectors (3).
Insert wood dowels (4) into the ends of footboard cross (H). Attach footboard posts (C and D) to footboard cross (H) with
wood dowels (4) and wood joint connectors (3).
Use Allen key (9) to tighten all wood joint connectors.
STEP 1

TWIN BED
01WM6108EC/01WM6108WC
Attach side rails (J and K) to headboard posts (A and B) with joint connectors (1) and barrel
nuts (2).
Use Allen key (9) to tighten joint connectors (1).
STEP 2

STEP 3
TWIN BED
01WM6108EC/01WM6108WC
Attach the other side rails (J and K) to support posts (I) with joint connectors (5).
Further secure the side rails using metal plates (7) and joint connectors (6) as shown below.
Attach the side rails (J and K) to footboard posts (C and D) with joint connectors (1) and barrel nuts (2).
Use Allen key (9) to tighten all joint connectors.

STEP 4
Attach one slat (L) to side rails (J and K) as close to headboard as possible with flat head screws (8).
Attach the meaining slats (L) to the side rails (J and K) with flat head screws (8) using space blocks (M)
to space them out evenly. on both sides.
NOTE: Tighten all flat head screws (8) with a Phillips head screwdriver (not included).
TWIN BED
01WM6108EC/01WM6108WC
I
I
J
H1
A

That's it ! You've finished assembling your twin bed.
TWIN BED
01WM6108EC/01WM6108WC
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
Intended maximum
Weight = 250 LBS
I
I
Headboard
Headboard
SIDE RAIL
S
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel # : [phone]
E-Mail: [e-mail]
Fax #: [phone]